Haier HWM65-918P User manual

Brand: Haier

Model: HWM65-918P

Category: Washing machines

Type: User manual

Please read this manual carefully

before using.

Retain it for future reference.

This manual is for

Fully automatic washing machine

User’s manual

HWM65-918P

the back cover

CONTENTS

Names of the parts

Safety precautions

Installation and adjustment

Preparation before washing

Put in the laundries

Usage of the detergent

Use the operation buttons

Finish washing

Disposal after washing

Trouble-shooting Answer to question

Packing list

Specification

Please check if power receptacle has good earthing condition before

using to guarantee your safety.

Contents marked with that symbol are related to the

safety of the product and the personal safety of the

user. Please operate in strict conformity to the

contents, otherwise it may cause damage of the

machine or injure the personal safety of the user.

Contents marked with that symbol are actions forbidden

to perform. Performing of those actions may result in

damage of the machine or injure the personal safety of

the user.

Warning sign

Forbidden sign

Notes: All illustrations in this Manual are given for reference only. Your products and

accessories may show differences from these illustrations due to our

continuous improvement.

Top lid

Control panel seat

)LOWH UF R Y H U

Inner tub

Pulsator

Control panel film

Liquid

whitener inlet

Cabinet

Adjustable leg

Fixed leg

Lint filter

Drain

hose

Cabinet

handle

Names of the parts

Meaning and description of the symbols

)URQWFRQWUROE R D UG

Base frame

˄SLHFHV˅

Screw

cover(left)

Safety precautions

Do not let the machine share one receptacle with other

electric appliances. If the plugging into the receptacles

loose, do not use the plug any more.

Do not put the machine at damp place

like the bathroom. Never wash it with

water. Do not put wet laundries on the

control panel.

Do not use water hotter than 50 .

In case the washing machine is installed

on ground with carpet, do not block the

ventilation hole with carpet.

Ensure carpet does not

obstruct the

opening in

the bases.

Do not bend ,extend, twist, bind by force. Do not press or nip it with weight.

Keep the pin of the power plug clean, if the power plug is polluted with dust,

please wipe with dry cloth carefully.

If the supply cord is damaged, it must be replaced by

the manufacturer or its service agent or a similarly

qualified person in order to avoid a hazard.

Carpet

Please plug the power plug on special

receptacle.Be sure to use three-pins

power receptacle .Ensure that the

earthing terminal of the power receptacle

is earthed reliably .Use electric

leakage protector if possible.

The washing machine must be positioned

so that the plug is accessible .Be sure to

pull the plug off and close the water faucet

in following cases:power failure,delivering

the machine ,setting the machine idle

or cleaning the machine.

Do not plug or pull the

power plug with wet hand.

The ventilation

holes at the

bottom

1.Do not wash water-proof laundries like

the raincoat,bike covers etc.to aviod

abnormal vibrations in spinning.

2.When washing the floating lanudries

(like down jacket etc.),pay attention to the

tags.Determine whether the laundries

can be washed by the machine according

to the tags(It can’t be washed by the

machine if there is no tag or the tag

doesn’t show that

the laundies

can be washed

by the machine .)

Do not decompose, repair or alter the

machine by yourself.

Do not put any hot or heavy items (such

as the kettle with hot water ) on the

washing machine.

Do not wash laundries with volatile

materials (such as thinner, petrol etc.)

This applianceis not intended for use by

persons(including children)with reduce

physical, sensory or mental capabilities,

of lack of experience and knowledge,

unless they have been given supervision

or instruction concerning use of the

appliance by a person responsible for

their safety.

Keep the machine away from direct

sunlight and heat source like the heater.

Safety precautions

Do not stretch hands into the working

machine. It is dangerous even if the

rotation is slow. Take special care of

the children.

WURO

LQQH

Please check if the water faucet is open, and if the connection of the

water inlet pipe is proper.

It is suggested to use foamless washing powder.

Please don t use the washer in the environment below 0 C; if the washer

has been stored below 0 C, please be sure to ensure the washer is placed

under the room temperature more than 2 hours and then use otherwise

the washing effects may be lowered or the washer may be damaged

Adjust the Installation position

The washing machine away from wall should be overrun 20mm. The largest

allowable slope of the shank base of the machine is 2 .The slanting or rough

ground will result in unstable running or stoppage of the machine. Please adjust it

with following methods:

Install the bottom plate

Please install and adjust the machine according to the requirement of the mannual.

It is very important to your security and correct operating the machine.

Adjust the adjustable leg:

Please lift up the side of the leg slightly,

twist the adjustable leg, make sure to

keep the washing machine in balance.

Usage of the drain hose

Hang the drain hose to a suitable height.

Do not step on or press

the drain hose.

0.7m<H 1.2m

Installation and adjustment

Insert the bottom plate to the pedestal from the front to

the back and the two fasteners to the opposite holes, then

install the bottom plate to the pedestal with the screw

by a cross screwdriver . See to the figure : (Please first

pull off the power plug from the receptacle

before installing.)

Carpet

Back

Front

Bottom plate

Screw

Two fasteners

High

Low

Adjustable

Confirm it’s horizontal

Hang the lead line to check if it is horizontal.

The drain hose shall be higher than the

water in the tub avoid to siphon.(It doesn’t

work normal as inleting water as drain)

2. Connect the other end to the water inlet valve .

NOTE:please check if the connection of the

water inlet pipe is proper

( As figure 2)

1.Close the water tap.

2. Pull off the water inlet hose from the water tap and washer

Take down the water inlet hose

Figure 2

Figure 1

the water faucet

The water inlet hose

Install the water inlet hose

1.Attach the water inlet hoses to water faucet . Using pliers,tighten

the coupling . (As figuer 1)

Check the connection between the water inlet hose and

the water tap

1.Swaying the hose gently to confirm if it is fastened stably .

2.After installation,open the tap to check if it is leaky.

3.Do not bend the hose with overstrain.

4.Before each usage please check if the connection

between the water inlet hose and the water tap is firm ,

so as to prevent dropping from improve installaiton position

5.After finish washing cycle please pay attention to turn

off the tap .

Jointer of the water inlet hose

Water absortion cushion

Jointer of the

water inlet valve

Preparation before washing

1.Connect the water inlet hose. Open

the water faucet.

2.Confirm that the washing machine is

earthed reliably. Then insert the

power plug into the receptacle. The

earth terminal shall not link to gas

pipeline and faucet water pipeline.

3.Put up the drain hose.

4.Slanting or uneven ground may result in

unstable working or abnormal noise. Please

make the machine stand horizontally.

a. Check if the laundries are applicable for washing with machine.

b.Please repa ir the damaged cloth before washing in order to avoid

the situation worse

c. Divide the laundries that are not colorfast from other laundries.

d. Put those laundries difficult to absorb water into water with hand.

e. For those laundries with heavy soil, please first remove the dirt like

mud or dust. For the parts with heavy soil, please apply detergent on

them in advance, which can make it easier to remove the soil.

f. For those laundries that may get lint ball and those with long fur, turQ

it over before putting in.

g. Do not put those laundries polluted by chemicals into the washing

machine directly.

h.The foreign materials will result in damage of the machine

0.7m<H 1.2m

Check if the

laundries has

special

requirement

on washing

pay attention to following before washing the laundries.

1 Preparation before washing

Clear the pocket.

Take out the coin,

sand,hairpins ect.

To aviod the

problem that

the washing

machine can

not be operated

normally.

Tie the long

strips; fasten

the button;

close zippers.

The quantity of

the laundries

shall not be too

large .Stretch

and loosen the

laundries before

putting them in

the tub.

When the pulsator

is running,the

buttons of the

laundries may cause

noise.For the sake

of discretion,please

put the laundries

with buttons into

other laundries.

2 Put in the laundries

The capacity of washing and spinning of he machine refer to the

largest weight of the standard laundries under dry condition that can

be washed or spinned in one time. One time washing quantity shall

be lower than the rated capacity.

The thickness, size, type of the cloth will influence the actual washing

capacity. It is suitable for one time washing to put in reasonable amount

of laundries and the laundries can be turned round in washing.

Do not select the high water level for laundries less than 1.0kg ,so as

to avoid splashing of water.

How to use the whitener

Fill water to desired level .Dilute the

whitener with container. Pour it

slowly into the liquid whitener inlet.

Avoid using whitener on laundries

with colour or pattern as they are

prone to lose color .

The whitener shall not touch the

laundries directly.

Refer to the user's manual for the

usage and quantity of the whitener.

For powder whitener, please

dissolve it before use.

How to use the softener

7KHXVDJHDQGGRVHRIWKHVRIWHQHUDVSHUWKHVSHFL¿FDWLRQVRIVRIWHQHU

Turn the inner tub,you will find a softener inlet ˈadd softener before start washing

and the softener will drop into the inner tub during the last time rinsing.

After the softener is put in,please don’t place for a long time otherwise softener may

solidify and cause flowing not smooth.

Please pay attention to clean because the softner is easy to curdle

Please dilute the softner when the softner’s concentration is high.

If you choose the rinse time is not twice,please don't use softener to avoid bad

efficiency due to add softener too early.

Directlydissolvedinthemachine:(notapplicableforfuzzyprogram )z

.retawfoytitnauqllamslliF.1

.yletelpmoctievlossidotsdnoces03rofnuR.redwopehtddA.2

.levelretawelbatiustceleS.seirdnualehtnituP.3

The instant dissolving of the washing powder:z

.reniatnocadnaC°03foretawmraweraperP.1

.tievlossidyllufotgnirritselihwredwopehtddA.2

If you select the quick program, it is suggested to adopt

liquid detergent instead of washing powder to guarantee

the washing effect.

Put in the proper quantities detergent according to the

water level and the laundries quantities.

It is suggested not to use high sudsing detergent. Washing

powder with poor quality or long

time storage maybe caked.

Please pay attention to cleaning the detergent box in time.

Access for detergent

Washing powder box

Liquid whitener

inlet

Liquid

softener

inlet

3 Usage of the detergent

How to use the washing powder

Off

a Description of the function of buttons

Mode and meaning of the indicators

On: indicate the program

about to run,or indicate

the selected mode or

POWER ON/OFF button

4 Use the operation buttons

Page 12

Remain time digitron

It displays "--" during detecting.

It displays total remained time during the running program(min).

Flashing: indicate the

running program, or indicate the selected mode or indicate the water level

“WATER LEVEL” button

Release the “Rinse”button and“Water level”button for more than 3 seconds ,

After a beep sound, the digitron displays “CL.”,the child

lock function is released.

Child lock function

Push and hold the“Rinse”button and“Water level”button, then push down the power on/off button. ,the digitron displays “CL”.Then

you can continue setting desired washing procedures.After setting ,push the “Start/pause” button, The child lock function is

activated.All of the buttons are locked and can’t make selection

indicate the water level

Push the power button to switch on the power

When the power is on push it again to switch off the

power .

Push the power button to switch on the power ,if the

start /pause button is not pushed the washing machine

will automatically switch off the power after 5 minutes.

When using the child lock function,if the top cover is opened,the machine will stop and display E2 alarm .After 5 seconds the

machine will automatic drainage .If you want to clear the E2 alarm ,please close the top cover and press the “Start/pause ”

button .The E2 alarm will be cleared.

It displays I remained reserved time during reserved

program(hours) .

It displays abnormal symbol in abnormal

situation.(See to Page12)

Standard

Wool

Tub Dry

Memory

Strong

Normal

Soft

Quick

Remaining

Time

Delay Time

18L

26L

34L

43L

30L

38L

47L

52L

22L

14L

3rd

2nd

1st

Water

level

Power

ON/OFF

Program

Reserve

Spin

Rinse

Delay

Wash

Afterthepowerisswitchedon,pressittostart

the machine.

During working, push it to pause.

During pause, push this button to restart

and

go on

working

“START/PAUSE” button

Program Applicable situation

Normal

Strong

Soft

Washing the normal laundries

Washing the bigger and heavier laundries

Washing the woollen textiles or underwear

Quick

Memory

Standard

Wool

Washing the laundries with small quantity

and light soil

Tub Dry

Drying the inner tub and the outer tub,

which can avoid growing mildew

Washing the woollen textiles

The common wash, the washer will set to

Custom program including wash, rinse,

spin and water level automatically last time

Washing the normal laundries with less water

“PROGRAM” button

The washing machine can detect the laundries

automatically after detection, it will set the water

level to

52L automati

Memory

and Standard

program.

You can also set water level by yourself.After the

machine

started, it will not set water level

automatically. You

shall

push the “Start/Pause”

button to make new setting.

If there’s water inside the tub, the machine can

not detect

thelaundriesandwilldisplaywater

level 34L .

If Quick program is selected, it will display

water

level 22L,

the water level can be adjusted.

IfTubDryprogramisselected,thewaterlevel

will not

respond.

During operation of wash , rinse and soak

program, you

canpushdownthewaterlevel

button to add water.

When you release the

button, or it reaches the overflow

water level,

the machine will stop adding water.

Thewaterleveldecidedmaybedifferentfrom

actual

value

because of the different moisture

level of the

laundries.

The water level of woollen function can only be selected

from 34L-52L.

The water level of rinse function is one level higher than

washing function.(Except the higest water level and hand

chosen rinse water level)

suitable value among level 26L,34L,43L,

-cally during the Normal,

Mins

Times

Rinse

Pause

Afterthepowerisswitchedon, isautomaticallyset.Toselectotherfull-auto

programs, please push the “Program” button till the corresponding indicator is on. Refer to

the “Program” button on Page 8 .

E.g. Set to “ ”program for

When a standar

cycleisselected,thefuzzyprogramisrun.Thewaterleveland

the washing

timecanbeselectedaccordingtobetextureand volumeofthelaundry.

Thewashingcycleis

automatically controlled.

The digitron displays the time remained

(in minutes)

before the washing is finished.

Push the “Delay” button, the digitron displays

time of washing (in hours).The

delay

Push the “Delay” button to display the delay

During Memory,Strong,Soft,Normal and Standard

program you can adjust the value of them.

For Wool you can select procedure , but can not

change them.

the delay

indicator flashes to indicate that the

function is operating.

mode.

“Wash”“Rinse”“Spin”bottons

“Delay”bottons

1.Push "Power” button to switch on the power

2.Push " Program” button to select suitable

automatic progr

“Normal”

the bigger and heavier laundries

Strong

or Normal

Press “Reserve Water” button to keep rinsing water;

When

Reserve Water mode is selected, thewashing

machine will keep rinsing water after each rinsing

with buzz and voice indications (for example, if 2nd

rinsing is selected, then 2nd rinsing water will be

kept; if 1st rinsing and 2nd rinsing are selected at the

same time, then 1st and 2nd rinsing water will be

both kept).

During waiting minutes, drainage function could be

activated if open and close cover once or press

start/pause key, buzz will prompt every 15 minutes

within 4 hours,if no operation within 4 hours during

waiting, it will drain water directly after one buzz,

and then turn to next process.

“Reserve Water” button

Memory program set to run washing machines automatically remember the last process of

program

Standard

Wool

Tub Dry

Memory

Strong

Normal

Soft

Quick

Remaining

Time

Delay Time

18L

26L

34L

43L

30L

38L

47L

52L

22L

14L

3rd

2nd

1st

Water

level

Program

Reserve

Spin

Rinse

Delay

Wash

Mins

Times

Rinse

Power

ON/OFF

Pause

Standard

Wool

Tub Dry

Memory

Strong

Normal

Soft

Quick

Remaining

Time

Delay Time

18L

26L

34L

43L

30L

38L

47L

52L

22L

14L

3rd

2nd

1st

Water

level

Power

ON/OFF

Program

Reserve

Spin

Rinse

Delay

Wash

Mins

Times

Rinse

Pause

b Steps of using the operation buttons

Water pressure and water level influence the wash time.

Even there's no water in the tub, the

spinning will start after a certain period.

Wash the laundries that are prone to lose

colors separately from other

laundries.

Wash and spin after putting the damageable

clothes into tuck net, to avoid

scathe.

Attention

For Standard

or Normal program

the washing machine will execute fuzzy program automatically

to detect

the cloth. After defection, it can set the water level automatically.

To select other

water level, ¿rst

push the “Start/Pause” button, then push the “Water Level” button to set the

water level.

3. Push “Wash”“Rinse”“Spin”botton to select

suitable procedure program

4 Push the “Water level”bottonˈselect suitable water level

5 Push the “Reserve Water”bottonˈselect suitable reserve

water times

6 Push the “Delay”bottonˈselect suitable delay wash program

If the top lid is opened when the machine is spinning, the machine will stop running and alarm.

After finishing washing, the washing machine will cut off the power automatically.

When the "Delay" function is activated, the indicator light of the program you have set

will be off. The "reserve (hour)" and "time remain" indicator lights will be on. During

reserve procedure, push the "Delay" button to display the reserve mode.

To change the running program or cancel the reserve setting, you

need to switch off the power and make new selection.

Confirm the operation of reserve program

Page9

the washing will finish

about 18 hours later

After switching on the power, the reserve time program is set to off mode automatically. If you

need to set the washing procedure to be ¿nished at delay time, please push the “Delay”

button to set the reserve washing program. Refer to delay button in Page 9 for selection.

7 Push the “Start/Pause”bottonˈclose the top lid

5 Finish washing

Spin

Rinse

Wash

Press “wash” “rinse” “spin” buttons can select washing time spin time and rinse

times. When start power, if press “rinse” or “spin” button, then the former process

indication light will be turned off automatically. And the former process will stop

running. For example, press the spin button after start the power then it will directly

run the separate spin process.

When start the power, if you want to select the water save function, press Reserve water

button to choose appropriate rinse times. If you start the machine, rinse times can not be

chosen. You can refer to page 9 “water save” button to select.

Disposal after washing

The lint filter must be used during washing.

It must be cleaned in time after each using.

Lint filter:

1.Push down the spring piece of the top lint filter to

make the claws out of the filter cover, and then

pull out the lint filter to get it down.˄figure1˅

2.Pull the back of the lint filter, and then you can get

down it off the front cover of the lint filter.˄figure2˅

3.Sweep the rubbish in the lint filter.

4.Put the back of the lint filter into the front cover .

5.Put the lint filter into filter cover, and make it tight .

6.Make sure the lint filter well installed, or it can

influence your use.

After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may

influence your using the machine.

Please first pull off the power plug from the receptacle before cleaning.

Clean the detergent box and set it on

the control panel seat.

1.The method of dismantle: Push it up

nd gently.

2.The method of install : install it

upwards and

aslant an

push it in .

aslant

LQQH

Trouble-shooting · Answer to question

When using the child lock function,

if the top cover is opened, the

machine will stop and display E2

alarm. After 15 seconds the machine

will automatic drainage

Clear the E2 alarm, please close the top

cover and press the “START/PAUSE”

button. Then E2 alarm will be cleared.

Phenomena The reason How to settle

ThedigitrondisplaysE0. Thetoplidisopenduring

reserve procedure.

Closethetoplid.z

Thedrainagecannot

work,oristooslow.The

digitron displays E1.

Is the drain hose blocked?

Cleantheforeignmaterial.Openand

closethetoplidonce.

It stops running in

midway. The digitron

displays E2.

Thetoplidisnotclosed.

Closethetoplid.z

Thesafetyswitchacts,

and the spinning cannot

work. The digitron

displays E3.

Are the laundries put slantingly?

Is the machine slanting?

Reorder the laundries. Close the top lid.z

Place the machine horizontally, open

and close the top lid once.

The water ¿lling does

notwork,orisslow,the

digitron displays E4.

Isthewatertapopened,oris

therewatersupplyfailure?

Isthewaterinletvalveblocked?

Isthewaterpressuretoolow?

Open the water tap. Open and close thez

top lid once.

Clean the water inlet valve then openz

and close the top lid once.

Useafterthewaterpressureisnormal.z

ThedigitrondisplaysE6.

ThedigitrondisplaysF2.

The water level sensor is bad. Please contact the after-sales servicez

department.

Please contact the after-sales service

department.

The

machine

does not

act

Not wash

Is there power failure?

Is the power plug inserted tightly?

Isthewaterlevelreachedpreset

position?

Pleaseuseitwhenthere’spowerz

supply.

Insert the power plug tightly.z

Fill water to the preset position.z

Not spin

Is the power plug inserted tightly?

Isthetoplidclosedreliably?

Are the laundries set Àat?

Insert the power plug tightly.z

Closethetoplid.z

Set the laundries Àat.z

The water tap leaks

There is abnormal sound

inside the machine

Is the screw of the jointer of water

inlet hose loose or awry?

Is the machine slanting?

Are the laundries put slantingly in

spinning?

Are there any foreign materials?

Fasten the screw of the jointer properly.z

Adjust the machine to be even

Reorder the laundries and close the top

lid.

Remove the foreign materials.z

(If there’s breakdown, please pull off the power plug before checking)

The following phenomenon are not breakdowns sometimes. Please con¿rmagainbeforesendingitto

repair.

Iftherearerealbreakdowns,pleasecometothespecialmaintenancedepartmentorafter-sale

servicedepartmentofourcompany.Donotrepairitby yourself.

Overflow alarm

Packing list

Name

Quantity

User's manual

One piece

Water inlet hose

One piece

Tapping screw

One set

The side of connection between the water inlet

hose and the washing machine

The side of connection between the jointer of

the water inlet hose and the water faucet

Phenomena Explanation

Thespinningisintermittentwhenitstarts. Balancethelaundriesto avoidslanting.

Pushthe“spin”buttontoselect“Spin”,butitdoesn’t

work.

Theprogramissettingthedraintime.Sometimeis

needed before it starts spinning.

There may be some water flowing out of the drain hose

in the first use of the machine.

It is the water remained in the factory inspection of

performance.

The pulsator pauses during water inlet in wash

and rinse.

It is to avoid splashing during water inlet.

Common phenomena

Fully automatic washing machine

Bottom plate

Warranty card

Put between the up gasket and

the up seal of the packing box

Injection pressure(MPa)

Specification

Washing/spinning capacity(kg)

6.5/6.5

Rated voltage/frequency

0.03 - 1.0

1/14L 2/18L 3/22L 4/26L5/30L

6/34L 7/38L 8/43L 9/47L 10/52L

220V /50Hz

Water level/Water quantity(about)

Haier HWM65-918P User manual

Brand: Haier

Model: HWM65-918P

Category: Washing machines

Type: User manual

Download PDF

report

Haier HWM65-918P User manual

Haier HWM65-918P User manual

Related papers

Other documents