12
BEFORE USE
Take a functional and visual inspection of the equipment after
assembly is complete. Also take the time to read all the warning
labels on the bike to make sure you have the safest experience
possible.
LOCATION OF THE
CYCLE
Place the cycle on a level
surface. There should be 7 feet
of clearance behind the cycle, 3
feet on each side and one foot
in front for the power cord. Do
not place the cycle in any area
that will block any vent or air
openings. The cycle should not
be located in a garage, covered
patio, near water or outdoors.
3 ft
7 ft
3 ft
92 cm 92 cm
1 ft
214 cm
31 cm
Please note the additional information to page 12 in the Owner’s Manual.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI