ABB CVE-3 is a device that incorporates a circuit to seal-in the CVE function of the relay. The circuit is comprised of a SPDT CVE contact and a DPST telephone relay contact. The relay can be adjusted for operating circles from 20 to 60 degrees and has a burden of 10.8 Volt-Amperes at 60 Hertz with a power factor of .422 and a wattage of 4.6. The relay will continuously stand 110% of rated voltage applied to the line and bus circuits, either separately or simultaneously. The relay has typical CVE reset times for the 20, 40 and 60 degree circle settings.
ABB CVE-3 is a device that incorporates a circuit to seal-in the CVE function of the relay. The circuit is comprised of a SPDT CVE contact and a DPST telephone relay contact. The relay can be adjusted for operating circles from 20 to 60 degrees and has a burden of 10.8 Volt-Amperes at 60 Hertz with a power factor of .422 and a wattage of 4.6. The relay will continuously stand 110% of rated voltage applied to the line and bus circuits, either separately or simultaneously. The relay has typical CVE reset times for the 20, 40 and 60 degree circle settings.
ABB CVE-3 is a device that incorporates a circuit to seal-in the CVE function of the relay. The circuit is comprised of a SPDT CVE contact and a DPST telephone relay contact. The relay can be adjusted for operating circles from 20 to 60 degrees and has a burden of 10.8 Volt-Amperes at 60 Hertz with a power factor of .422 and a wattage of 4.6. The relay will continuously stand 110% of rated voltage applied to the line and bus circuits, either separately or simultaneously. The relay has typical CVE reset times for the 20, 40 and 60 degree circle settings.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI