Sharp CR27FS1 Owner's manual

Category
LCD TVs
Type
Owner's manual
1
A
s an
E
NERGY
S
TAR
®
P
artner, SHARP has determined that this product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
E
NERGY
S
TAR
®
is a
U.S.
registered
trademark.
COLOR TELEVISION
L OPERATION MANUAL L
MODEL
CR27FS1
PAGE
Ch Setup ............................................
17 ~ 22
EZ Setup .......................................................
17
Channel Setting ..............................
18 ~ 20
Personal Reference ......................................
21
Universal Plus Function ................................
22
Set Up ................................................
23 ~ 25
Energy Save .................................................
23
Screen Format ..............................................
24
Auto Input .....................................................
25
Using the Video and Audio Input Jacks
26 ~ 27
Using the Audio Output Jacks ..........................
28
Operation of Remote Control .............
29 ~ 33
Before Calling for Service .................................
34
Specifications ...................................................
35
Limited Warranty ..............................................
36
PAGE
IMPORTANT INFORMATION ...........................
2
Before Operating Your Television ...........
2~ 3
Supplied Accessories ........................................
3
Antenna Connections .............................
3~ 4
Quick Reference Control Operation ..................
5
EZ SETUP during First Use ..............................
6
Demo Mode .......................................................
7
Accessing the MAIN MENU screen without
Remote Control .................................................
8
Language ..........................................................
8
Sleep Timer .......................................................
9
Video Adjust ....................................................
10
Audio Adjust ........................................
11 ~ 12
Closed Caption ................................................
13
Parent Control ....................................
14 ~ 16
VIEW TIMER ..................................
14 ~ 16
CONTENTS
0094 SE
01-02 CR27FS1[E].p65 20/6/01, 4:15 pm1
2
Energy efficiency is becoming increasingly important to consumers both in the US and in Canada. ENERGY
STAR is a US registered trademark to indicate that a product meets its guidelines for energy efficiency.
WHAT IS ENERGY STAR
®
TVs and VCRs use energy both when they are on and when they are off. North Americans spend more
than $1 billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY
STAR
®
models will reduce that energy “leakage” by up to 75 percent. Ultimately, this will mean more than
$500 million a year in energy savings for consumers.
The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution
that contributes to global warming. If every North American family replaced their TVs and VCRs with
ENERGY STAR
®
models, it would reduce carbon dioxide emissions by five million tons every year —
equivalent to eliminating the pollution from more than one million cars.
By using ENERGY STAR
®
products, you will save money on your electric bills and use less energy. That
makes good economic sense and it’s good for our environment.
IMPORTANT INFORMATION
Location
For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
Note:
If the set will not be used for a long period, such as during a vacation, unplug the set from the wall
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off
either the TV or the radio.
If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
Before Operating Your Television
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
Model No.:
Serial No.:
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
01-02 CR27FS1[E].p65 18/6/01, 4:01 pm2
3
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND,
TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING
SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE
PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR
TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH
THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS
WHEN INSTALLING THE PRODUCT AND USE MOUNTING
ACCESSORIES RECOMMENDED BY THE MANUFACTURER.
A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH
CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES
MAY CAUSE THE PRODUCT AND CART COMBINATION TO
OVERTURN.
1. A 75 ohm system is generally a round cable with F-
type connector that can easily be attached to a
terminal without tools (not supplied).
2. A 300 ohm system is a flat “twin-lead” cable that
can be attached to a 75 ohm terminal through a
300-75 ohm ADAPTOR (not supplied).
Antennas
The antenna requirements for good color television reception are more important than those for
black & white television reception. For this reason, a good quality outdoor antenna is strongly
recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
Before Operating Your Television (Continued)
Size AA
Dry Batteries
Infrared Remote Control/Part Number
RRMCG1626CESB
L Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two
batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks inside the
compartment.
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
CATV
PAUSE
TV
DVD VCR
FLASHBACK
DISPLAY
INPUT
TV • CATV• VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
Antenna Connections
Supplied Accessories
Battery
Cover
Pull up
03-04 CR27FS1[E].p65 21/6/01, 4:28 pm3
4
A. Combination VHF/UHF Antennas B. Separate VHF/UHF Antenna
Cable TV converter/
descrambler
(not supplied)
Two-set
signal
splitter
(not
supplied)
Cable TV Line
RF switch (not supplied)
OUT
IN
F-type connector should be finger tightened only
F-type connector
75-ohm coaxial cable
When connecting the RF cable to the TV set, do
not tighten F-type connector with tools.
If tools are used, it may cause damage to your TV
set.
(The breaking of Internal circuit, etc.)
Antenna Connections (Continued)
OUTDOOR ANTENNA CONNECTION
Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the
TV set.
OUT
A
IN
B
REAR OF TV
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF ANTENNA
VHF/UHF ANTENNA
300/75-ohm
ADAPTOR
(Not supplied)
or
IN OUT
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
VHF
ANTENNA
UHF
ANTENNA
COMBINER
(not supplied)
or
REAR OF TV
CABLE TV (CATV) CONNECTION
A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
Some cable TV companies offer premium pay channels. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber
by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
A position on the RF switch (not supplied) : You can view all unscrambled channels using the TVs
channel keys.
B position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converters channel keys.
Note:
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that
might be required.
03-04 CR27FS1[E].p65 18/6/01, 4:02 pm4
5
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
four seconds.
Press again Removes display.
Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press Switch to external video
INPUT 1 mode.
Press 2 times Switch to external video
INPUT 2 mode.
Press 3 times Switch to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times Switch back to the
original TV mode.
See page
27.
ENTER
Used in some instances where a Cable
Converter Box requires an enter
command after selecting channels,
when using the REMOTE KEYPAD
button. (See page
29)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
See pages
17 ~ 20 for channel
presetting.
Moves the a mark of the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
CLOSED CAPTION appears when
sound is muted.
Note:
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
The degree of illumination will vary depending on the strength of lighting used.
The degree of illumination will decrease with time and depending on the temperature.
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
Sunlight and fluorescent lighting are the most effective when charging the display.
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV CATV VCR DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD VCR
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page
21)
VOLUME UP/DOWN
(+) Increases sound.
() Decreases sound.
In menu mode, changes or selects
the TV adjustments.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
See page 29.
Basic Remote Control Functions
Quick Reference Control Operation
L Location of Controls
Front Panel
Quick Reference Control Operation
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
SENSOR AREA FOR
REMOTE CONTROL
POWER
Press On.
Press again Off.
VOLUME UP/DOWN
(+) Increases sound.
() Decreases sound.
VIDEO/AUDIO TERMINALS
IN 2
MENU.
Press Accesses MAIN
MENU.
Press again Exits MAIN
MENU.
(INSIDE DOOR)
05 CR27FS1[E].p65 18/6/01, 4:02 pm5
6
SE ECTLELA ANGU G
ENGL I SH
ESPA
OL
FRANCAI S
SELECT CH /
89
:
SET VOL+ /:
SE ECTLELA ANGU G
ENGL I SH
ESPA
OL
FRANCAI S
SELECT CH /
89
:
SET VOL+ /:
PSTO RTSTA
CO ECTNN A E ATNNNRO
CA EBL
ST TAR ?SE PTUEZ
PSTO
125
RTSTA
PLEASE
W
AIT
OA U T P ROGR I A
MM
NG
2
VOL
VOL
+
VOL
+
1 2 3
4 5 6
7 8 9
0
100
FLASHBACK
ENTER
PERSONAL PREFERENCE
POWER
TV
DVD
VCR
MENU MUTE
CATV TV
DVD VCR
DISPLAY
INPUT
VOL
CH
CH
VOL
+
ABCD
POWER
TV
VOL
VOL
+
CH
CH
POWER
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/()
(EZ SETUP mode)
L When you turn on the TV for the first time, it will automatically
memorize the broadcast channels.
Please perform the following instructions before pressing the
power button.
(1) Insert the batteries into the remote control. (See page 3)
(2) Connect the antenna cable to the TV set. (See page 3 ~
4)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press the
POWER
button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to select ENGLISH, SPANISH
(ESPAÑOL) or FRENCH (FRANÇAIS). Then press
VOL (+)
or
()
to SET LANGUAGE.
3 Press
VOL (+)
or
()
to access EZ SETUP mode.
4 Press
VOL (+)
.
The tuner will automatically search for the
broadcast and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press
VOL ()
and it will be cancelled.
If you want to SETUP again, please refer to page
17 on SETUP.
To cancel EZ SETUP
Press
VOL ()
.
5 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
Note:
If EZ SETUP does not memorize all the channels in your region, please refer to page 18 for more
information on manually memorizing the channels using CHANNEL SETTING.
It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occuring around the area. Please refer to pages 18 ~ 20 for
more information on manually memorizing the channels using CHANNEL SETTING.
EZ SETUP during First Use
(On the Set)
(Remote Control)
(SELECT LANGUAGE mode)
06-07 CR27FS1[E].p65 18/6/01, 4:02 pm6
7
CH
CH
VOL
VOL
+
M
EUN
SELEP RTIME
V I DEO ADJUST
AUD I O ADJUST
CLO DSE OCAPT I N
PARE TNALCOTRLON
CH TSE UP
TSE UP
(MAIN MENU screen)
SETUP
DEMO
INP TUAUTO
LANGUAGE
ENERGY SAV
AT
E
SCREEN FORM
(SET UP mode))
DEMO OFF:
VOL
VOL
+
VOL
VOL
+
(DEMO select mode)
DEMO ON:
L Using the Remote Control
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to SETUP.
3 Press
VOL (+)
or
()
to access SET UP mode, then press
CH UP
(
8
)
or
DOWN (
9
)
to move the a mark to DEMO.
4 Press
VOL (+)
or
()
to select DEMO select mode.
5 Press
VOL (+)
or
()
to select ON.
6 Press
MENU
to exit.
Example:
DEMO mode display
Demo Mode
Prod uc t s
Fro
m
C
oe
m
S
H
A
R
P
S
H
A
R
P
M
inds
VOLUME
(+)/()
CHANNEL
UP (8)/
DOWN (9)
MENU
1 2 3
4 5 6
7 8 9
0
100
MENU MUTE
FLASHBACK
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
CATV TV
DVD VCR
CH
CH
06-07 CR27FS1[E].p65 18/6/01, 4:02 pm7
8
L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
L Setting the ON SCREEN DISPLAY Language.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “SET
UP”.
3 Press
VOL (+)
or
(–)
to access SET UP mode, then press
CH UP
(
8
)
or
DOWN (
9
)
to move the “a” mark to “LANGUAGE”.
4 Press
VOL (+)
or
(–)
to access LANGUAGE change mode.
5 Press
CH UP (
8
)
or
DOWN (
9
)
to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
6 Press
MENU
to exit.
Language
(LANGUAGE change mode)
(MAIN MENU screen)
(SET UP mode)
Accessing the MAIN MENU screen without Remote Control
If you misplaced your Remote Control you can still access most settings
via the MAIN MENU screen when you press
MENU
on the TV set.
Some features of your TV set will not be accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Service Center
for a replacement.
(On the Set)
MENU
button
M
EUN
SELEP RTIME
V I DEO ADJUST
AUD I O ADJUST
CLO DSE OCAPT I N
PARE TNALCOTRLON
CH TSE UP
TSE UP
M
EUN
SELEP RTIME
V I DEO ADJUST
AUD I O ADJUST
CLO DSE OCAPT I N
PARE TNALCOTRLON
CH TSE UP
TSE UP
LANGUAGE
ENGL I SH
ESPA OL
FRANCAI S
IDIOMA
ENGL I SH
ESPA
OL
FRANCA I S
SETUP
LANGUAGE
ENER YG SAVE
SCREEN MATFOR
DEMO
AUTO I NPUT
CH
CH
VOL
VOL
+
CH
CH
VOL
VOL
+
CH
CH
08-10 CR27FS1[E].p65 25/6/01, 2:37 PM8
9
Sleep Timer
L You can preset your television to turn off automatically in increments of 30, 60, 90 or 120
minutes.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
VOL (+)
or
()
to access sleep timer mode.
3 Press
VOL (+)
or
()
to set a sleep time of 30, 60, 90 or 120
minutes.
4 Press
MENU
to exit.
Note:
To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– M REMAIN
during step 3.
While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the remotes Display key is pressed.
(MAIN MENU screen)
(TIMER SET mode)
M
EUN
SELEP RTIME
V I DEO ADJUST
AUD I O AD J UST
CLO DSE OCAPT I N
PARE TNAL COTRLON
CH TSE UP
TSE UP
SLEEP T I MER
M1 2 0 REMA I N
VOL
VOL
+
VOL
VOL
+
08-10 CR27FS1[E].p65 18/6/01, 4:02 pm9
10
Description of Adjustment Items
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to
VIDEO ADJUST.
3 Press
VOL (+)
or
()
to access VIDEO ADJUST mode.
4 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to the
item (Ex. PICTURE) you wish to adjust.
5 Press
VOL (+)
or
()
to access PICTURE adjust mode, then
press
VOL (+)
or
()
to adjust PICTURE.
6 Repeat steps 4 to 5 to adjust other settings you wish to adjust.
7 Press
MENU
to exit.
Note:
VIDEO ADJUST setting is available for AIR or CABLE/INPUT 1/INPUT 2/INPUT 3 and COMPONENT
respectively.
(VIDEO ADJUST mode)
VOL DOWN ()
decrease contrast
(MAIN MENU screen)
Video Adjust
VOLUME
(+)/()
CHANNEL
UP (8)/
DOWN (9)
MENU
V I DEO ADJUST
ESS
P I CTURE
TN
EMP .T
TINT
OLORC
OLORC
ESETR
MSV
HARPS
RIGHB
.
6
I
C
TUR
E
P
0
VOL UP (+)
increase contrast
M
EUN
SELEP RTIME
V I DEO ADJ US T
AUD I O AD J UST
CLO DSE OCAPT I N
PARE TNALCOTRLON
CH TSE UP
TSE UP
Selected VOL UP
(
+
)
button VOL DOWN
(
)
button
item
PICTURE To increase contrast To decrease contrast
TINT To make skin tones greenish To make skin tones purplish
COLOR To increase color intensity To decrease color intensity
BRIGHT To increase brightness To decrease brightness
SHARP To increase sharpness To decrease sharpness
COLOR To choose a LOW, ML, MH or HIGH COLOR TONE.
TEMP.
VMS This is used to emphasize the contour (and allows selection of
OFF, SOFT, STANDARD and HARD).
RESET To return all adjustments to factory preset levels.
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
MENU MUTE
FLASHBACK
DISPLAY
INPUT
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD VCR
VOL
VOL
+
CH
CH
CH
CH
VOL
VOL
+
08-10 CR27FS1[E].p65 18/6/01, 4:02 pm10
11
M
EUN
SELEP RTIME
V I DEO ADJUST
AUD I O ADJUST
CLO DSE OCAPT I N
PARE TNALCOTRLON
CH TSE UP
TSE UP
VOL
VOL
+
CH
CH
AUD I
MTS
OAD
SPE
FAO
KAE
TRE LB
BASS
E
R
BAL NA
RES TE
CE
JUST
CH
CH
L MTS (Multichannel TV Sound)
This circuit allows reception of stereo or bilingual TV sound.
L INTERNAL SPEAKER SWITCH
This function turns the TVs internal speakers ON or OFF when listening to sound from
external speakers by using the AUDIO OUTPUT JACKS on page 28.
L FAO (Fixed Audio Output)
This function turns the TVs internal speakers OFF and allows fixed audio output from the
AUDIO OUTPUT JACKS on page 28. With FAO, the TVs volume control is disabled.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to
AUDIO ADJUST.
3 Press
VOL (+)
or
()
to access AUDIO ADJUST mode.
4 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a marks to
MTS, SPEAKER or FAO.
5 Press
VOL (+)
or
()
to select STEREO, SAP or MONO
when the a mark is at MTS position.
6 Press
MENU
to exit.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to
AUDIO ADJUST.
Audio Adjust
(MAIN MENU screen)
(AUDIO ADJUST mode)
MTS : STEREO
(AUDIO ADJUST mode)
VOL
VOL
+
Selected item VOL UP (+) button VOL DOWN () button
TREBLE To increase treble response To decrease treble response
BASS To increase bass response To decrease bass response
BALANCE To emphasize the right speakers volume To emphasize the left speakers volume
RESET To return all adjustments to factory preset levels.
MTS
STEREO
SAP
MONO
SPEAKER
ON
OFF
FAO
ON
OFF
CH
CH
M
EUN
SELEP RTIME
V I DEO ADJ US T
AUD I O AD J UST
CLO DSE OCAPT I N
PARE TNALCOTRLON
CH TSE UP
TSE UP
(MAIN MENU screen)
11-12 CR27FS1[E].p65 18/6/01, 4:03 pm11
12
TREBLE 0
3
MO O
S
SA
E
P
N
IR
12
R
E
O
ON A
T
4
3:
IRON A
Audio Adjust (Continued)
VOL
VOL
+
AUD I
MTS
OAD
SPE
FAO
KAE
TRE LB
BASS
E
R
BAL NA
RES TE
CE
JUST
CH
CH
VOL
VOL
+
3 Press
VOL (+)
or
()
to access AUDIO ADJUST mode.
Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to
“TREBLE”, “BASS” or “BALANCE”.
4 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “the
item (Ex. TREBLE)” you wish to adjust.
Press
VOL (+)
or
()
to access TREBLE adjust mode.
5 Press
VOL (+)
or
()
to adjust “TREBLE”.
6 Repeat steps 4 to 5 to adjust other settings.
7 Press
MENU
to exit.
Ex: Actual screen indicating ON AIR when receiving STEREO
broadcasts
Actual channel number
ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
L You can enjoy Hi-Fi stereo sound or SAP broadcasts
where available.
Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound.
SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
L If stereo sound is difficult to hear.
You can obtain clearer sound by manually switching to the fixed monaural mode.
Note:
Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
Selecting MTS while in the INPUT mode does not change the type of sound; in this case, sound is
determined by the video source.
If the “FAO” mode is selected “ON”, the “SPEAKER” mode will automatically turn “OFF”.
“SPEAKER” selecting will not affect “FAO” mode.
(AUDIO ADJUST mode)
(CHANNEL call on screen)
VOL
VOL
+
CH
CH
VOL DOWN (–)
decrease treble response
VOL UP (+)
increase treble response
AUD I
MTS
OAD
SPE
FAO
KAE
TRE LB
BASS
E
R
BAL NA
RES TE
CE
JUST
11-12 CR27FS1[E].p65 2/7/01, 11:12 am12
13
C
D
ATA
:
CH1
LOSED CAPT I N
O
M:OEDCPATINO
C
D
ATA
:
CH1
LOSED CAPT I N
O
M:OEDCPATINO
C
D
ATA
:
CH1
LOSED CAPT I N
O
M:OEDCPATINO
CAPTION
TEXT
OFF
CH 1
CH 2
M
EUN
SELEP RTIME
V I DEO ADJUST
AUD I O ADJUST
CLO DSE OCAPT I N
PARE TNALCOTRLON
CH TSE UP
TSE UP
PERSONAL PREFERENCE
MENU MUTE
CATV TV
DVD VCR
VOL
CH
CH
VOL
+
ABCD
VOL
VOL
+
CH
CH
CH
CH
VOL
VOL
+
L HOW TO SET CLOSED CAPTION
Your TV is equipped with an internal Closed Caption decoder. Closed
Caption is a system which allows you to view conversations, narration,
and sound effects in TV programs and home videos as subscript on
your TV screen as shown on the right.
Not all the programs and videos will offer closed caption. Please look
for the symbol to ensure that captions will be shown.
Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT. For each mode, two channels are available, CH1 and CH2:
The [CAPTION] mode subscripts dialogues and commentaries of TV
dramas and news programs while allowing clear view of the picture.
The [TEXT] mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to
CLOSED CAPTION.
3 Press
VOL (+)
or
()
to access CLOSED CAPTION setting
mode.
4 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to either
MODE or DATA.
5 Press
VOL (+)
or
()
to change the CLOSED CAPTION setting.
6 Press
MENU
to exit.
Note:
If a broadcast has CLOSED CAPTION and the
MUTE
button is pressed, the set enters [CAPTION]
mode automatically. Pressing
MUTE
again will return the set to its previous condition.
Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your TV.
If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen
may become dark and blank. Should this occur, set the Closed Caption mode to OFF.
Closed Caption
VOLUME
(+)/()
CHANNEL
UP (8)/
DOWN (9)
MENU
(MAIN MENU screen)
(CLOSED CAPTION setting mode)
MODE :
DATA :
13 CR27FS1[E].p65 18/6/01, 4:03 pm13
14
Parental Control (VIEW TIMER)
L VIEW TIMER
This function allows you to restrict TV viewing time and also allows you to control TV usage.
This function is to prevent your children from watching too much TV.
VIEWING TIME (an accumulative timer: counts only the time
duration acquired while the TV is on.)
VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10
hours) in 30 minutes intervals.
OFF TIME (Restricts TV watching after the VIEWING TIME
reaches zero.)
OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)
in 30 minutes intervals.
STATUS (ON/OFF setting of VIEW TIMER)
L How to set VIEW TIMER.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to
“PARENTAL CONTROL”.
3 Press
VOL (+)
or
(–)
to access PARENTAL CONTROL mode.
4 Press
VOL (+)
or
(–)
to access “VIEW TIMER”.
5 Press
CH UP (
8
)
or
DOWN (
9
)
to select “VIEWING TIME”
and “OFF TIME”. For each selection, press the
VOL (+)
or
(–)
to set the time duration.
6 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to
“SECRET No.”.
(MAIN MENU screen)
(PARENTAL CONTROL mode)
PAR NT A L CONTROL
E
E
W
IMERVI T
VIE T IMER
W
VIE
--H:
:
--M
ING IMET
W
OFF
--
H--M
TIME
SEC ET No . :RE .
STATU
S
:OFF
M
EUN
SELEP RTIME
V I DEO ADJ US T
AUD I O AD J UST
CLO DSE OCAPT I N
PARE TNALCOTRLON
CH TSE UP
TSE UP
VIE T IMER
W
VIE
--H --M
ING IMET
W
OFF
--
H--M
TIME
SEC ET No . :RSEC ET No .R
STATUS :OFF
VOL
VOL
+
VOL
VOL
+
CH
CH
CH
CH
VOL
VOL
+
VIE T IMER
W
VIE
2H 0 0M
ING IMET
W
OFF
--
H--M
TIME
SEC ET No . :RSEC ET No .R
STATUS :OFF
VIE T IMER
W
VIE
2H 0 0M
ING IMET
W
OFF
5
H00M
TIME
SEC ET No . :RSEC ET No .R
STATUS :OFF
CH
CH
14-16 CR27FS1[E].p65 20/6/01, 4:15 pm14
15
Parental Control (VIEW TIMER Continued)
7 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
.
8 Press
CH UP (
8
)
or
DOWN (
9
)
to select “STATUS”. Press
the
VOL (+)
or
(–)
to turn ON the “VIEWING TIMER”. (If STATUS
is OFF, VIEW TIMER will not operate)
9
When done, press
MENU
to exit.
Example
To restrict anybody from watching the TV for 5 hours, after watching
the TV for 2 hours, your settings would look like this:
They can choose to watch the 2 hours of TV however they wish.
For example, they could watch 1 hour of TV, turn TV off for 30
minutes, then turn TV on and watch the remaining 1 hour on the
VIEWING TIMER.
L To change the VIEW TIMER settings. (SECRET No. is registered)
1 Repeat “How to set VIEW TIMER” steps and select
“PARENTAL CONTROL VIEW TIMER” during step 3. Press
VOL (+)
or
(–)
, and “INPUT SECRET No.” will be displayed.
2 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
,
and the VIEW TIMER access screen will be displayed. Repeat
step 5 ~ 6.
Note:
When you choose the correct SECRET No., the VIEW TIMER
access screen is displayed. If the wrong SECRET No. is chosen,
“SECRET No. IS INCORRECT” is displayed. Input the SECRET
No. again in this case.
CH
CH
VOL
VOL
+
VIE TIMER
W
VIE
2H 0 0M
ING IMET
W
OFF
5
2134
H00M
TIME
SEC ET No . :R.
STA US ON:T
1 2 3
4 5 6
7 8 9
0
100
ENTER
1 2 3
4 5 6
7 8 9
0
100
ENTER
VOL
VOL
+
VIE TIMER
W
VIE
2H 0 0M
ING IMET
W
OFF
5
2134
H00M
TIME
SEC ET No . :R.
STA US ON:T
–––
NI
PUT SECRET No .
∗∗∗
NI
PUT SECRET No .
SI
SECRET No .
INCORRECT
VIE TIMER
W
VIE
2H 0 0M
ING IMET
W
OFF
5
2134
H00M
TIME
SEC ET No . :R.
STA US OFF:
:
:
T
14-16 CR27FS1[E].p65 25/6/01, 2:43 PM15
16
Parental Control (VIEW TIMER Continued)
L To cancel the VIEW TIMER (While the TV set is OFF but the VIEW TIMER is set)
1 Turn on TV; a blue screen message “TIME OVER” will appear.
If you do nothing, the TV will turn off in approximately 30
seconds.
2 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
.
When you choose the correct SECRET No., the VIEW TIMER
is canceled. If the wrong SECRET No. is chosen, “SECRET
No. IS INCORRECT” is displayed. Input the SECRET No.
again in this case.
L How to cancel the VIEW TIMER setting or change the SECRET No.
(When you forget the SECRET No.)
1 Repeat “How to set VIEW TIMER” steps and select
“PARENTAL CONTROL VIEW TIMER” during step 3. Press
VOL (+)
or
(–)
, and “INPUT SECRET No.” will be displayed.
2 Press and hold both
VOL (+)
and
CH DOWN (
9
)
on the TV set
simultaneously until the VIEW TIMER access screen is
displayed. Now you can cancel the VIEW TIMER settings or
change the SECRET No. while “INPUT SECRET No.” is
displayed.
L Notice of Remaining VIEWING TIME
For every 30 minute interval, the “remaining time” will be displayed
for 4 seconds. For the last 5 minutes, the “remaining time” will be
displayed every minute.
“0H00M” will be displayed for 10 seconds just before the VIEW
TIMER is complete.
VOL
(+)
1 2 3
4 5 6
7 8 9
0
100
ENTER
–––
NI
PUT SECRET No .
VOL
VOL
+
–––
NI
PUT SECRET No .
IT
ME OV ER
***
*
NI
PUT SECRET No .
IT
ME OV ER
REMAIN
30M
VIEW TIMER
0H
REMAIN
05M
VIEW TIMER
0H
REMAIN
0H00M
VIEW TIMER
(On the Set)
VOL (+)/CHANNEL
DOWN (
99
99
9
) buttons
14-16 CR27FS1[E].p65 25/6/01, 2:45 PM16
17
L EZ SETUP
By operating the channel preset functions, you can preset your
TV to the desired channels for viewing.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to CH
SETUP.
3 Press
VOL (+)
or
()
to access CH SETUP mode, then press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to EZ SETUP.
4 Press
VOL (+)
or
()
to access EZ SETUP mode.
5 Press
VOL (+)
.
The tuner will automatically search for the broadcasting and
cable TV channels. (The CH No. will automatically increase
when it appears.)
If you want to stop the EZ SETUP process once it has started,
press
VOL ()
. Search will be cancelled.
To cancel EZ SETUP
Press
VOL ()
.
6 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
Ch Setup
(MAIN MENU screen)
VOLUME
(+)/()
CHANNEL
UP (8)/
DOWN (9)
REMOTE
KEYPAD
(EZ SETUP mode)
(CH SETUP mode)
2
CH TUPSE
ON LAPERS F .PRE
ET PUEZ
I
S
ER ASUN V
LSPUL
AIR/CABLE
CH MEMORY
CH SEARCH
PLEASE
W
AIT
125
AUTO PROGRAMM I NG
STOP START
1 2 3
4 5 6
7 8 9
0
100
MENU MUTE
FLASHBACK
A B C D
ENTER
PERSONAL PREFERENCE
VOL
VOL
+
CH
CH
M
EUN
SELEP RTIME
V I DEO ADJUST
AUD I O ADJUST
CLO DSE OCAPT I N
PARE TNALCOTRLON
CH TSE UP
TSE UP
VOL
VOL
+
CH
CH
CH
CH
VOL
VOL
+
VOL
+
MENU
ANTENNA ORTCO CNNE
CA LBE
ST TAR ?EZ SETUP
TPSO ATTRS
17-18 CR27FS1[E].p65 18/6/01, 4:03 pm17
18
Ch Setup (Continued)
L CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 AIR/CABLE setting
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to CH
SETUP.
3 Press
VOL (+)
or
()
to access CH SETUP mode.
4 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to AIR/
CABLE.
5 Press
VOL (+)
or
()
to access AIR/CABLE mode.
6 Press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to the
desired mode.
7 Press
MENU
to exit.
Note:
Receivable channels of your TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC mode only)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
(MAIN MENU screen)
(CH SETUP mode)
(AIR/CABLE mode)
CH TUPSE
ON LAPERS F .PRE
ET PUEZ
I
S
ER ASUN V
LSPUL
AIR/CABLE
CH MEMORY
CH SEARCH
AIR
AIR
STD
HRD
IRC
/CABLE
CABLE
CABLE
CABLE
AIR
CABLE STD
CABLE HRC CABLE IRC
AIR
AIR
STD
HRD
IRC
/CABLE
CABLE
CABLE
CABLE
M
EUN
SELEP RTIME
V I DEO ADJUST
AUD I O ADJUST
CLO DSE OCAPT I N
PARE TNALCOTRLON
CH TSE UP
TSE UP
VOL
VOL
+
CH
CH
CH
CH
VOL
VOL
+
CH
CH
(AIR/CABLE mode)
17-18 CR27FS1[E].p65 18/6/01, 4:03 pm18
19
(CH SETUP mode)
(CH SEARCH mode)
2 How to saving broadcast TV channels into memory.
1.1 Press
MENU
to access the MAIN
MENU screen, then press
CH UP
(
8
)
or
DOWN (
9
)
to move the a
mark to CH SETUP.
1.2 Press
VOL (+)
or
()
to access CH
SETUP mode, then press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark
to CH SEARCH.
1.3 Press
VOL (+)
or
()
to access CH
SEARCH screen.
START
2.1 Press
VOL (+)
. The tuner will search
through all available channels in your
area and add them into the TVs
memory.
STOP
2.2 Press
VOL ()
. CH SEARCH will stop
at the current channel and will not
add any higher channels.
2.3 Press
MENU
to exit.
Note:
If you press
VOL (+)
again while in the CH SEARCH mode, auto-
program will start again, and the previously memorized channels
will be lost.
CH TUPSE
ON LAPERS F .PRE
ET PUEZ
I
S
ER ASUN V
LSPUL
AIR/CABLE
CH MEMORY
CH SEARCH
CH ARCHSE
IAR12
STOP START
(START)
(STOP)
CH
CH
CH
CH
VOL
VOL
+
VOL
VOL
+
VOL
+
VOL
VOLUME
(+)/()
CHANNEL
UP (8)/
DOWN (9)
MENU
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
MENU MUTE
FLASHBACK
DISPLAY
INPUT
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD VCR
Ch Setup (Continued)
19-20 CR27FS1[E].p65 18/6/01, 4:04 pm19
20
(CH SETTING mode)
Ch Setup (Continued)
(CH MEMORY mode)
M
EUN
SELEP RTIME
V I DEO ADJUST
AUD I O ADJUST
CLO DSE OCAPT I N
PARE TNALCOTRLON
CH TSE UP
TSE UP
or
1 2 3
4 5 6
7 8 9
0
100
ENTER
CH
CH
CH
CH
VOL
VOL
+
VOL
VOL
+
CH
CH
VOL
VOL
+
3 How to adding weak or additional channels or erasing unwanted channels from TV memory.
1 Press
MENU
to access the MAIN MENU screen, then press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to CH SETUP.
2 Press
VOL (+)
or
()
to access CH SETUP mode, then press
CH UP (
8
)
or
DOWN (
9
)
to move the a mark to CH
MEMORY.
3 Press
VOL (+)
or
()
to access CH MEMORY.
4 Use
CH UP (
8
)
or
DOWN (
9
)
or
REMOTE KEYPAD
to select
each desired channel to add or erase.
5 Press
VOL (+)
to add a channel to the TVs memory or press
VOL ()
to erase a channel from the TVs memory.
6 Press
MENU
to exit.
CH MO YRME
A
EER S
DDA
ARI12
(CH SETUP mode)
CH TUPSE
ON LAPERS F .PRE
ET PUEZ
I
S
ER ASUN V
LSPUL
AIR/CABLE
CH MEMORY
CH SEARCH
19-20 CR27FS1[E].p65 18/6/01, 4:04 pm20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Sharp CR27FS1 Owner's manual

Category
LCD TVs
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages