User Manual
LR Audio Bi-directional Switcher
Model No:ADSW0012M1
Introduction
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference.
Our series of converters, switchers, extenders, matrixes and splitters are designed to
make your A/V device use more convenient, more comfortable, more productive and
more cost-efficient.
The device is one LR Audio Bi-directional Switcher that can switch two LR Analog audio
to one LR audio receiver. Also, it can distribute one input LR audio to two audio
receiver.(when use as the distribute, it only can distribute the input LR audio to one LR
audio receiver at the same time).
Our devices offer solutions for noise, space and security concerns, data center control,
information distribution, conference room presentation, school and corporate training
environments.
Bi-directional Conneciton
2* LR Audio Sources => 1 LR Audio Receiver
1 LR Audio Source => 2*LR Audio Receiver
Feature：
Two LR Analog Audio Input switch to one LR Analog Audio Receiver
One Input LR Analog Audio distribute to two LR Analog Audio Receiver(when use as
the distribute, it only can distribute the input LR audio to one LR audio receiver at
the same time
No Need External Power
Manual Switch Button to control the device
LR Analog Audio Signal Input/Output support Max 2V p-p
20Hz~20KHz Input/Output Frequency Range:20Hz-20Khz.
To use the standard AV Cable, the input/output cable distance can be up to 8m.
Easy to Install
Size：L*W*H 95*50*20 mm
Weight：120g
Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the
machine.
1. The machine should be placed at the spot far from the Damp, High-Temperature,
Dusty, Erosive, and oxidative environment.
2. All parts will be free from the strong shake, hit, fall.
3. Pls do not open the cover and do not touch the inside parts.
Before power on, pls check the connection line carefully. And make sure that all
interfaces are normally connected. The common trouble shooting way shows below:
Serial
NO
Trouble Description
Cause and Ways to deal with
1
No sound
1.To check if the signal source is on and well
connected.
2.Check the system connection quality.
3.Check if the line is all good quality.
4.Check the cable quality.
2
Sound Not Stable
To do cable connection again to see if it is ok.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Gefen 4x1 HD Switcher with analog audio Owner's manual
-
Kramer TP-123EDID User manual
-
Ross ADA-7802-600 User manual
-
-
-
Kramer TP-122N User manual
-
Kramer Electronics TP-121EDID User manual
-
Lexicon DD-8 Owner's manual
-
Kramer TP-9 User manual
-
Atlona AT-UHD-CLSO-612ED Owner's manual