Product Wiring Diagram
CAUTION
When installing the rear camera,
the hole size should necessarily
beat10mm.
CAMERA CABLE EXTENSION
CABLE
.__
____
,-==
Please use the enclosed tape
to tighten them. not to be loose.
Please use when connecting to a Navigation
or
monitor which does not have an automatic
rear
view
switching function
RED
(Reverse
Signal
+12V)
FUSE
BOX
Bl..PCK(GND)
POWER
CABLE
Product feature
. 1 /3. 7 inch image sensor
Using 1/3.7 inch image sensor displays vivid image day and night.
• Waterproof design
It
blocks the inflow
of
moisture and external materials
from
complete waterproof design.
• Zinc die casting case
Iron die casting case with great durability is applied for quality and design of the product.
• Simple design
It
was designed with unique design of vehicle in elegant design and simple installation.
· View angle
of
163°
It
secures broad sight when
it
is
converted into rear view screen by providing lens angle
of
163°.
· Parking guide line
R:>ssible
to
safe
parking along parking guide
line.
Main
components
Main components
Camera extension cable
power cable
1 8
nut
hole guide sticker
double
-side
tape
fixed
tape
Guidelings before installation
manual
• The power of this product is designed with the specification of
DC
12V
vehicle.
• Do not disassembe the product as
it
is
water-proof.
•
Do
not wipe or scratch the camera lens with sharp object as
it
may cause the
lurriness of the image. (Repair is unavailable)
• Do not voluntarily cut off the wire or connect with other wires.
It
may cause severe
damage to electric devices of vehicle. (Repair is unavailable)
• Camera should be installed accurately.
Installation of this camera may cause collision with pedestrians or minor collisions
with other vehicle so
it
should not be.
• Camera lens should be wiped regularly with soft cloth and others
in
order to remove
external materials such as sand. snow, and others on the surface of camera.
• The angle of is subject the vibration of vehicle. Install
it
so that
it
not be shaken.
• Please Install
it
so that each connecter contact moisture.