Page is loading ...
CLIP-ON HEADREST MONITOR
Note:
1. Please read and review this instruction manual carefully before using this device to
fully understand the features and operation of this product.
2. Due to patent conditions, some 1080P native schemes do not support audio and
video files.
DDAUTO specializes in digital products for entertainment and
enjoyment in cars with special expertise in audio/video electronics.
Our number one goal is customer satisfaction and we treat every
customer as if they were our only one. Our customer-first philosophy
is what guides our every decision.
Digital gear for driving
Contact Us: DDAUTOCustomerCenter@gmail.com
&RQWHQWV:
2—6 TOUCH KEY MODEL (DD1019D)
7—11 TOUCH SCREEN MODEL (DD1019HT)
12 Installation
13 Remote Control/Wiring Diagram
14 Troubleshooting
Pixels Resolution:
9 inch: 1024(W) x 3(RGB) x 600(H)
10.1 inch: 1024(W) x 3(RGB) x 600(H)
LED Backlight
16:9 Screen Format
DVD/CD/VCD/MP3/WMA/DivX/MPEG4 Playback System
USB 2.0 Port
SD/MMC/MS Card Reader
AV Input/Output
Earphone Socket
FM Transmitter
IR Transmitter (2 Ch for Wireless Headphones)
Wireless FM Modulator (8 Ch for Audio Output)
On-Board Stereo Speakers
Remote Control (Optional)
Pole Adapters
12V DC Input (10-14V) / Negative Ground
Features:
1
2
Appearance and Functions (DD1019D)
1. Short press for menu, long press to return main menu.
2. Volume/Analogue down, move to left during menu setup.
3. Volume/Analogue up, move to right during menu setup.
4. Short press to power on, short press for disc ejection or status when playing, long press
power off.
5. Short press for next track, long press fast forward, move upward during menu setup.
6. Short press for previous track, long press fast reverse, move downward during menu setup.
7. Short press to pause or play, long press return to previous menu, confirmation for
function options.
8. USB port
9. SD port
10. Earphone jack
11. AUX input
12. DC 12V input
13. Disc in/out slot
1
TOUCH KEY MODEL---General features and operation
8
9
10
11
12
2 3 4 5 6 7
13
Main Menu Functions
1 2 3
4 5 6
1. SD input
2. USB input
3. Disc play
4. AV1 input
5. AV2 input
6. Function setup
System Operations (General key features of the model )
1.Use the left triangle button or right triangle button to search and select the setup icon,
then click enter. Setup content will then be displayed. Select desired function using ▲ or ▼
then press enter to continue setup.
Displays the main menu after startup.
3
2. Select language icon and press enter button to access language selection menu.
Select desired language and press enter key.
.
3. Return to previous menu by pressing ▼ then choose FM OUT and confirm to enter
the FM option menu. Choose desired FM Frequency and confirm, then adjust the FM
frequency of the car radio to match. The car radio can now receive the audio signal
from the DVD unit.
4. Return to previous menu and select IR OUT to enter the IR OUT menu. Select desired
frequency and confirm. Then open IR headphones and adjust the frequency to match.
The IR headphones can now receive the audio signal from the DVD unit.
4
5. Return to previous menu and select LOGO setup to enter the LOGO menu.
Select the desired car brand and it will be displayed the next time the DVD is started.
6. Return to previous menu, and select the display functions setup to enter the display
menu. Brightness, hue and saturation can be adjusted.
7. Using media in normal mode: Insert DVD, SD or USB and short press menu button.
Function setup menu will be displayed along with a small icon for preferences.
5
8. Press return button to go back to previous menu. Select the track function icon for track
options. Press buttons to select preferred track.
9. Press return button to go back to previous menu. Select time function to setup operating
time options. DVD unit will power off based on selected time options.
10. In SD or USB operating mode, short press menu button to see the following icon.
Select preferred file and confirm. If SD or USB has multiple files, long press return button
to go back to previous menu. Files will appear as MP3, Movie, Ebook or photo icons.
Select desired content and confirm to view.
6
1
2
3
4
5
6
7
1. Power switch on/off
2. USB port
3. SD port
4. Earphone jack
5. AUX input
6. DC 12V input
7. Disc in/out slot
7
Appearance and Functions (DD1019HT)
TOUCH SCREEN MODEL---One-key control touch-screen model
Main Menu Functions (touch-screen model)
Display of the main menu screen after startup.
1 2 3 4
5 6 8 97
10
11 12
13
14 15
1. Video playback status
2. Disc media play
3. SD card
4. USB
5. AV1 status
6. AV2 status
7. Page up/down
8. In/out disc
9. Open and close screen
10. Display DVD/SD/USB playing status
11. Function setup
12. FM transmitter
13. IR transmitter
14. Game
15. Wallpaper select
8
System Operation (touch-screen model)
9
1.Touch icon, to enter setup screen.
2. Touch Language and select desired language.
3. In DVD/SD/USB play mode, the following icons will be displayed.
Return to main menu
Close screen
Chapters
Return to previous menu
Prev
Play/pause
Next
Stop
Volume
Page down
4.Touch the screen in operating mode. Playback progress is shown and can be adjusted
by touching and sliding.
5.Touch volume icon and slide to adjust the volume.
6.Touch page forward icon to adjust.
Continuous
Order
Track display
Chapter display
Page down
10
11
7.Touch page down icon to adjust.
Picture zoom
Picture settings
Display adjustment
MP3
MP4
Page back
8.Touch icon on Main Menu to display FM transmitter, then select desired frequency.
9.Touch icon on Main Menu to display IR transmitter, then select desired channel.
12
1. Remove unit from packaging and remove two screws on backside. Unplug
plastic supports and remove U-shaped metal clips from both sides of the
bracket to separate plastic rings.
Installation
2. Raise the car headrest and choose the appropriate plastic ring that best fits the
diameter of the headrest supports. Place the two parts of the plastic ring securely
around the headrest supports and fix them in place using the U-shaped metal clips.
3. Place the plastic bracket in between the two U-shaped metal clips and insert
the clips firmly into the holes on each side of the plastic bracket. Adjust the plastic
bracket so that it is centered between the two headrest supports.
4. Hold the DVD unit in place and insert the metal plate on the back of the unit into
the plastic bracket. Adjust DVD unit to the desired angle, then fix it securely.
Finally, lower the car headrest to its original position.
Fuse
Red (DC 12V)
Black (GND)
Remote Control (Optional)
13
Wiring Diagram
DVD
USB
SD
RANDOM
MAIN MENU
SUB-T
Fast Reverse
Fast Forward
Eject disc
Back to previous
Audio right/left
Problem Comment
No sound and image
No image
No sound
Power is disconnected. Turn the unit on.
Disc is scratched. Signal wire is disconnected.
Adjust the volume control, check that the FM and IR
function status is OFF.
Black screen
Incorrect setup of image brightness and contrast.
Low voltage.
Blurred or unstable image Disc is scratched.
Color Cast Function menu setup is incorrect. Weak signal.
No power Check connections and circuit. Replace fuse if necessary.
No image or audio only
after loading disc
Disc is scratched. Disc format is not supported.
Error disc / No disc
Disc upside down. Try another disc. If no solution,
contact us.
Wall adapter included Yes, included.
DIY ability required
Basic DIY ability required, follow directions for
successful installation.
FM function
The player can only broadcast FM signal, not receive
FM signal.
Any regional restrictions No, this set is free from region restrictions.
Video formats supported
AVI, DIVX, MPG, MP4, MOV, 3GP, M4V, MKV, RMVB,
FLV, VOB, DAT, ASF
Image format
Audio format
JPEG
MP3, FLAC, APE, WAV, AAC, M4A
Unstable sound DVD is dirty, scratched or seriously damaged.
Clean or replace the disc.
14
Troubleshooting
/