Page is loading ...
Take your time to carefully read and understand
these instructions before assembling or using the
appliance.
In this manual the following pictograms are used:
Indicates possible serious damage to the applian-
ce if the instructions in this manual are ignored.
Denotes risk of electric shock.
TECHNICAL SPECIFICATIONS
Home ventilator WHV-8
V 032 egatloV
zH 05 ycneuqerF
Rated power 73/40/13 W
Dimensions (wxhxd) 365x280x280 mm
gk 2.3 thgieW
SAFETY INSTRUCTIONS
When using electric appliances always observe
the local safety regulations. Carefully read the
instructions below before using the appliance.
Store these instructions carefully!
• Preferably mount the home ventilator out of reach
of children.
• Do not pull the cord to remove the plug from the wall
socket; pull the plug.
• This electric appliance meets all current safety
regulations. In order to prevent accidents repairs may
Electrical safety
The ventilator has been designed for a certain
mains voltage (230 V). Always check that the
mains voltage corresponds to the voltage on the
PACKAGE CONTENTS
1 Home ventilator
1 Manual
1
- Check the appliance, any loose parts and accessories
for transport damage.
DESCRIPTION
The home ventilator has been exclusively designed to
remove dirty air from the house. For this purpose it has
tor should provide supply grids and/or cantilever
windows for the normal air supply.
MOUNTING
Always observe the safety instructions and the
local regulations.
•
e.g. a wall or ceiling.
• w, remove one of
from the inside of the plenum. If required, precut with
a Stanley knife.
•
plenum, and turn it around until it clicks.
•
• Fit the suction line(s) from the house to the suction
plenum.
Home
ventilator
WHV-8
1
2
4x
FIG. A FIG. B
• Mount the worm box (3) (g. C). The worm box
has been tted with a bayonet catch. The fan and
the motor plate have already been mounted on the
worm box.
• If required, the motor plate and the cover (4) can be
removed again (g. D).
• Now mount the discharge line between the wing nozz-
le of the ventilator and the roof lead-through.
The electric connection has been indicated in gu-
re E.
• Connect the switch to a Perilex wall socket.
• Insert the Perilex plug of the home ventilator in the
Perilex wall socket.
Legend to gure E:
N = zero U1 = main winding + auxiliary winding
(blue)
L1 = high speed Z = auxiliary winding (brown)
L2 = middle speed U2 = main winding (black)
L3 = low speed CV-3 = 3 positions switch
USE
- Put for minimum use the switch in position 0
(night position).
- Put for normal ventilation in the daytime situation,
the switch in position 1 (day position).
- Put for maximum ventilation the switch in position 2
(cooking position).
MAINTENANCE
This appliance has been designed to function without
problems for a long time without the need for special
maintenance.
CLEANING
Always remove the plug from the Perilex wall
socket before starting any maintenance activities.
Regularly clean the housing with a soft, damp cloth.
SERVICE
This electric appliance has been thoroughly tested befo-
re leaving the factory. Should your home ventilator
despite this show any defects, have it sent back to the
Airow service department by your installer.
DECLARATION OF CONFORMITY
Airow declares that this home ventilator WHV-8 has
been designed in compliance with 89/392/EEC.
This electric appliance has been radio and TV
suppressed in compliance with directives 76/889/EEC &
82/499/EEC.
4
2x
FIG. D
45
0
3
terminal strip WHV - 8
earth directly
connected to motor
Perilex plug
Perilex wall socket
supply voltage
230V
CV - 3
N L3 L2 L1 U1 Z U2
FIG. C
FIG. E
Telephone: +44 (0) 1494 525252
Facsimile +44 (0) 1494 461073
©
Developments Limited reserve the right, in the
interests of continuous development, to alter
are accepted subject to our conditions of sale
which are available on request
Certificate No. EMS 569454
BS EN ISO 14001 : 2004
Certificate No. FM 00152
BS EN ISO 9001 : 2008
Aidelle House, Lancaster Road,
Cressex Business Park,
High Wycombe, Buckinghamshire,
HP12 3QP
/