Lifetime 290038 Owner's manual

Brand: Lifetime

Model: 290038

Category: Baby furniture

Type: Owner's manual

Lifetime 290038 is a versatile outdoor playset designed to provide endless hours of fun and entertainment for children ages 3 to 12. With its sturdy construction and a variety of play activities, this playset is perfect for promoting physical activity, coordination, and social interaction among children. The playset includes a spacious playhouse with a shaded interior, a rock-climbing wall, two slides, a swing beam with two belt swings, and a trapeze bar. The playhouse provides a cozy and imaginative space for kids to play pretend or simply hang out with friends.

Keep this Product ID Number and use when contacting Customer Service:

MODEL N° 290038

OWNER’S MANUAL

COPY

INSTRUCTION #1052703 C

08/21/2009

LIFETIME’S PROMISE TO YOU:

We invite you to read our privacy policy at www.lifetime.com

There are beneﬁ ts to registering your Lifetime product. With our new online product registration form, it’s fast and easy! Register with us at www.lifetime.com

and enjoy these great beneﬁ ts:

s2ECEIVEEXCLUSIVEMONEYSAVINGOFFERSFROM"UY,IFETIMECOMOURONLINESTOREASWELLAS.%7PRODUCTNOTIlCATIONSANDSPECIALCLOSEOUT

PROMOTIONS

s)NTHEUNLIKELYEVENTOFAPRODUCTRECALLORSAFETYMODIlCATIONWEWILLNOTIFYYOU

s2EGISTERINGYOURPRODUCTGUARANTEESYOUWARRANTYSERVICE)FYOUDONOTREGISTERYOURPRODUCTYOURWARRANTYRIGHTSWILLNOTBEDIMINISHED

"UTYOUWILLNEEDTOPROVIDEASALESRECEIPTTOVERIFYYOURPRODUCTPURCHASEDATEBEFOREWARRANTYSERVICEWILLBEPROVIDED

Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your

personal data to other third parties, or allow them to use your personal data for their own purposes.

Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.

4OENSURESAFETYDONOTATTEMPTTOASSEMBLETHISPRODUCTWITHOUTREADINGANDFOLLOWINGALLINSTRUCTIONSCAREFULLY#HECKTHEENTIRE

BOXANDINSIDEALLPACKINGMATERIALSFORPARTSANDORADDITIONALINSTRUCTIONMATERIAL"EFOREBEGINNINGASSEMBLYIDENTIFYANDINVENTORY

ALLPARTSANDHARDWAREUSINGTHEPARTSANDHARDWARELISTSANDIDENTIlERSINTHISDOCUMENT0ROPERANDCOMPLETEASSEMBLYUSEAND

SUPERVISIONAREESSENTIALFORPROPERORIENTATIONANDTOREDUCETHERISKOFACCIDENTORINJURY!HIGHPROBABILITYOFSERIOUSINJURYEXISTS

IFTHISPRODUCTISNOTINSTALLEDMAINTAINEDANDOROPERATEDPROPERLY&AILURETOCOMPLYWITHANYOFTHEWARNINGSINTHISINSTRUCTION

MANUALMAYRESULTINSERIOUSPERSONALINJURIESSUCHASCUTSBROKENBONESNERVEDAMAGEPARALYSISBRAININJURYORDEATH&AILURETO

COMPLYMAYALSORESULTINPROPERTYDAMAGE0LEASEHEEDALLWARNINGSANDCAUTIONS

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY

DAMAGE AND WILL VOID WARRANTY.

SAFETY INSTRUCTIONS

Save this owner’s manual for future reference and in the event that the manufacturer has to be contacted.

**U.S. and Canada customers ONLY**

)&!33)34!.#%)3.%%$%$

DO NOT CONTACT THE STORE!

CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

(/523AMTOPM-ONDAYTHROUGH&RIDAY-OUNTAIN3TANDARD4IME

#ALLORVISITOUR7EBSITEFOR3ATURDAYHOURS

Lifetime Products, Inc.

0/"OXs&REEPORT#ENTER"LDG$#LEARFIELD5TAH

&ORCUSTOMERSOUTSIDETHE53OR#ANADAPLEASECONTACTTHESTOREFORASSISTANCE

This product is intended for use by children ages 3 to 12,

and is for outdoor residential use only.

COPY

BEFORE BEGINNING ASSEMBLY

+EEPTHEHARDWAREBAGSANDTHEIRCONTENTSSEPARATE)FANYPARTSAREMISSINGCALLOUR

#USTOMER3ERVICE$EPARTMENT

)DENTIFY AND INVENTORY ALL PARTS AND HARDWARE USING THE PARTS AND HARDWARE LISTS AND

IDENTIlERSINTHISDOCUMENT

4ESTlTALL"OLTSBYINSERTINGTHEMINTOTHEIRRESPECTIVEHOLES)FNECESSARYCAREFULLY

SCRAPEAWAYANYEXCESSPOWDERCOATINGBUILDUPFROMINSIDETHEHOLES$ONOTSCRAPE

AWAYALLOFTHEPOWDERCOATING"AREMETALMAYRUST9OUMAYNEEDTOPOUNDSOME

"OLTSINTOPLACEWITHAHAMMERORMALLET

TOOLS AND PARTS REQUIRED FOR THIS ASSEMBLY

*Two adults required to

complete assembly*

Only adults should set up the product. Do not allow children

in the setup area until assembly is complete.

7/32” Allen Wrench

INCLUDED

9/16” Wrench



Screwdriver



Scrap Wood



5/8” Wrench



Adjustable Wrench



Ladder





This area is located at the top, left-hand

corner of the page and indicates which tools

and hardware are needed to complete the

assembly steps on a page.

This area is located at the top, right-hand

corner of the page and shows an image of the

product with shaded parts indicating which

section is being assembled.

SEC

Note:

Refer to the following areas throughout the instructions

to assist in the assembly process:

This area is usually located in the bottom,

left-hand corner of a step and indicates that

special attention is needed to perform a

particular part of a step.

These areas are usually located in the bottom,

right-hand corner of a step and indicate that

damage to the product or serious injury may

occur if the caution or warning is not heeded.

WARNING

ASSEMBLY GUIDES

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

CAUTION

**IMPORTANT SAFETY INFORMATION**

PLEASE READ BEFORE

BEGINNING ASSEMBLY:

Installation and Ground Preparation Instructions:

Place the equipment on a level, well-drained ground, not less than 6 ft (1.8 m) from any structure or obstruc-s

tion such as a fence, garage, or house.

Provide enough room so that children can use the equipment safely. For example, for structures with multiple s

play activities, a slide should not exit in front of a swing.

Separate active and quiet activities from each other. For example, locate sandboxes away from swings or use s

a guardrail or barrier to separate the sandbox from the movement of the swings.

Do not install home playground equipment over concrete, asphalt, packed earth, grass, carpet, or any other s

hard surface. A fall onto a hard surface can result in serious injury to the equipment user (see page 7).

To prevent serious injury, warn children that they must not use the equipment until properly installed.s

Create a site free of obstacles that could cause injuries – such as low overhanging tree branches, overhead s

wires, tree stumps and/or roots, large rocks, bricks, and concrete.

Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and s

loose-ﬁll surfacing materials washing away during heavy rains

For any questions call our Customer Service Department at 1-800-225-3865 for more information.s

Playground and Surface Materials Instructions:

Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging.s

Do not install loose ﬁll surfacing over hard surfaces such as concrete or asphalt.s

Installations of rubber tiles or poured-in-place surfaces (other than loose-ﬁll materials) generally require a s

professional and are not “do-it yourself” projects.

Use Playground Surfacing Materials (other than loose-ﬁll material) which comply to the safety standard ASTM F1292 s

Standard Speciﬁcation for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment.

INSTALLATION & GROUND PREPARATION INSTRUCTIONS

PLAYGROUND AND SURFACE MATERIALS INSTRUCTIONS

OPERATING INSTRUCTIONS

Observing the following instructions and warnings reduces the likelihood of serious or fatal injury:

The maximum number of occupants that may safely use the entire play set including all components is three s

with a maximum weight of 405 pounds

(184 kg).

On-site adult supervision should be provided for children of all ages.s

Instruct children not to walk close to, in front of, behind, or between moving items.s

Do not move the equipment while it is in use.s

If routine checks and maintenance procedures are not done, the equipment could overturn and/or become a hazard. s

Check surfacing material and replenish as necessary to maintain proper depth (see page 7).s

Rake surfacing periodically to prevent compaction and maintain appropriate depths.s

Remove any tripping hazards, such as exposed concrete footings, tree stumps, or rocks.s

Check all nuts and bolts twice monthly during the usage season for tightness and tighten as required. It is s

particularly important that this procedure be followed at the beginning of each season.

Check all coverings for bolts and sharp edges twice monthly during usage season to be certain they are in s

place. Replace when necessary. It is especially important to do this at the beginning of each new season.

Check swing seats, ropes, cables and chains monthly during usage season for evidence of deterioration. s

Contact customer service for replacement parts.

Oil all metallic moving parts monthly during the usage period.s

Take plastic swing seats indoors or do not use when the temperature drops below 40s

F (5

C).

Sand rusted areas on tubular members and repaint using a nonlead-based paint meeting the requirements s

of Title 16 CFR Part 1303.

If the warning sticker is illegible, destroyed, or removed contact the Customer Service Department at s

1-800-225-3865 for a replacement.

Disposal Instructions: Disassemble and dispose of the playground equipment in such a way that no unrea-

sonable hazards will exist at the time the equipment is discarded. Follow all local disposal requirements.

OPERATING INSTRUCTIONS (CONTINUED)

Instruct children not to twist swing chains or ropes or loop them over the top support bar since this may s

reduce the strength of the chain or rope.

Instruct children to avoid swinging empty seats.s

Teach children to sit in the center of the swings with their full weight on the seats.s

Instruct children not to use the equipment in a manner other than intended. s

Instruct children not to get off the equipment while it is in motion.s

To prevent entanglement and strangulation, dress children appropriately using well-ﬁtting shoes and avoiding s

ponchos, scarves, jackets with neck drawstrings, helmets with straps, and other loose-ﬁtting clothing that is

potentially hazardous while using equipment.

Instruct children not to play when the equipment is wet.s

Instruct children not to attach items to the playground equipment that are not speciﬁcally designed for use s

with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as

they may cause a strangulation hazard.

MAINTENANCE INSTRUCTIONS

The U.S. Consumer Product Safety Commission (CPSC)

estimates that about 100,000 playground equipment re-

lated injuries resulting from falls to the ground surface are

treated annually in U.S. hospital emergency rooms. Injuries

involving this hazard pattern tend to be among the most

serious of all playground injuries, and have the potential

to be fatal, particularly when the injury is to the head. The

surface under and around playground equipment can be a

major factor in determining the injury causing potential of a

fall. It is self evident that a fall onto a shock-absorbing sur-

face is less likely to cause a serious injury than a fall onto a

hard surface. Playground equipment should never be placed

on hard surfaces such as concrete or asphalt and while

grass may appear to be acceptable, it may quickly turn to

hard packed earth in areas of high trafﬁc. Shredded bark

mulch, wood chips, ﬁne sand or ﬁne gravel are considered

to be acceptable shock-absorbing surfaces when installed

and maintained at a sufﬁcient depth under and around

playground equipment.

Table 1 lists the maximum height from which a child would

not be expected to sustain a life-threatening head injury in

a fall onto different loose-ﬁll surfacing materials if they are

installed and maintained at depths of 6, 9, and 12 inches.

However, it should be recognized that all injuries due to falls

cannot be prevented no matter what surfacing material is

used.

It is recommended that a shock-absorbing material should

extend a minimum of 6 ft. in all directions from the perim-

eter of stationary equipment such as climbers and slides.

However, because children may deliberately jump from a

moving swing, the shock absorbing material should extend

in the front and rear of a swing a minimum distance of 2

times the height of the pivot point measured from a point

directly beneath the pivot on the supporting structure.

This information is intended to assist in comparing the

relative shock-absorbing properties of various materials. No

particular material is recommended over another. However,

each material is only effective when properly maintained.

Materials should be checked periodically and replenished

to maintain correct depth as determined necessary for your

equipment. The choice of a material depends on the type

and height of the playground equipment, the availability of

the material in your area, and its cost.

*This information has been extracted from the CPSC publications “Playground Surfacing--Technical Information Guide” and “Handbook for

Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to the: Ofﬁce of Public Affairs, U.S. Consumer Product

Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1-800-638-2772.

***This data is from tests conducted by independent testing laboratories on a 6-inch depth of uncompressed shredded tire samples produced

by four manufacturers. It is recommended that persons seeking to install shredded tires as a protective surface request test data from the sup-

plier showing the critical height of the material when it was tested in accordance with ASTM F1292.

CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS*

**The maximum fall height for this product is 108 in (274 cm).

We recommend using 9 in (23 cm) of Double Shredded Bark Mulch.**

5 ft 6 ft 7 ft 9 ft 10 ft 11 ft 12 ft

-- 6 in -- -- 9 in 12 in --

-- 6 in 9 in -- -- -- 12 in

6 in -- 9 in 12 in -- -- --

-- 6 in 9 in -- 12 in -- --

-- -- -- -- 6 in -- --

TABLE 1 — Depth of Surfacing Material Required Based on Fall Heights

Material / Fall Height

Double Shredded Bark Mulch

Wood Chips

Fine Sand

Fine Gravel

Shredded Tires***

(152 cm)

(183 cm) (213 cm)

(274 cm)

(305 cm) (335 cm) (366 cm)

(15 cm)

(23 cm) (30 cm)

(15 cm) (23 cm) (30 cm)

(30 cm)

(23 cm)(15 cm)

(15 cm)

(23 cm)

(30 cm)

(15 cm)

A cordless drill can be used for driving screws;

however, care should be taken not to over-tighten or strip screws.

USE AT YOUR OWN RISK!

Safety Zone

USING A DRILL IS NOT RECOMMENDED

FOR DRIVING BOLTS.

25 feet 6 inches

36 feet

Playset dimensions:

Length 13’ 6”

Width 10’ 6”

Recommended play area:

Length 25’ 6”

Width 36’

6 feet

18 feet

HARDWARE LIST

PARTS LIST

ID Item Description Qty

Box 1

!,% "OTTOM0OLE 4

!,( Top Pole 4

Box 2

"+- )NSIDE"RACKETWITHNOTCHES 

"+. 4URN"AR 

"+/ /UTSIDE"RACKET 

!,& -IDDLE0OLE 4

ID Item Description Qty

"+1 !3IDE"RACKET 

"+0 "3IDE"RACKET 

"+2 -IDDLE3WING"AR 

"+3 /UTSIDE3WING"AR 

"+4 "ELT3WING 

"+5 4RAPEZE3WING 

"&$ &OOT#AP 4

!-4 7ARNING3TICKER 

ID Item Description Qty

Box 2

Swing Bar Assembly Hardware (1049898)

"%7 v3QUARE.UT 

"%8 vXv(EX"OLT 

!.+ v.YLON7ASHER 

!20 Pendulum 6

"%9 3PACER 6

!"" v#ENTERLOCK.UT 4

"%: vXv(EX"OLT 4

!36 v2OUND#AP 

ID Item Description Qty

A-Frame Assembly Hardware (1049899)

!$3 vXv3CREW 

"&" vXv"UTTON(EAD3CREW 

"&# v!CORN.UT 

!/1 v!LLEN7RENCHSHOWNIN4OOLS2EQUIRED 

Final Assembly Hardware (1049900)

"&" vXv"UTTON(EAD3CREW 4

"&# v!CORN.UT 4

!2/ (OLE#AP 

PARTS IDENTIFIER

Parts shown at 10% of Actual Size

BKMX

)NSIDE"RACKETWITHNOTCHES

BKOX

/UTSIDE"RACKET

ALEX

"OTTOM0OLE

ALFX

-IDDLE0OLE

ALHX

Top Pole

BKQX

!3IDE"RACKET

BKPX

"3IDE"RACKET

BKRX

-IDDLE3WING"AR

BKSX

/UTSIDE3WING"AR

BKNX

4URN"AR

PARTS IDENTIFIER

BKTX

"ELT3WING

Parts shown at 5% of Actual Size

SWING BAR ASSEMBLY HARDWARE

Hardware shown at Actual Size

BKUX

4RAPEZE3WING

HARDWARE IDENTIFIER

BEWX

v3QUARE.UT

BEXX

vXv(EX"OLT

ANKX

v.YLON7ASHER

ARPX

Pendulum

BEYX

3PACER

ABBX

v#ENTERLOCK.UT

BEZX

vXv(EX"OLT

ASVX

v2OUND#AP

BFDX

&OOT#AP

Part shown at 25% of Actual Size

HARDWARE IDENTIFIER

A-FRAME ASSEMBLY HARDWARE

Hardware shown at Actual Size

ADSX

vXv3CREW

BFBX

vXv"UTTON(EAD3CREW

BFCX

v!CORN.UT

FINAL ASSEMBLY HARDWARE

Hardware shown at Actual Size

BFBX

vXv"UTTON(EAD3CREW

BFCX

v!CORN.UT

AROX

(OLE#AP

SWING BAR ASSEMBLY

HARDWARE REQUIRED

PARTS REQUIRED

TOOLS REQUIRED

SEC

Parts shown at 10% of Actual Size

Hardware shown at Actual Size

BEWX

v3QUARE.UT

BEXX

vXv(EX"OLT

ANKX

v.YLON7ASHER

ARPX

Pendulum

BEYX

3PACER

ABBX

v#ENTERLOCK.UT

BEZX

vXv(EX"OLT

ASVX

v2OUND#AP

BKRX

-IDDLE3WING"AR

BKSX

/UTSIDE3WING"AR

9/16” Wrench



Adjustable Wrench



Scrap Wood



TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.1

3LIDEANOutside Swing Bar (BKS) INTOTHEMiddle Swing Bar (BKR) ASSHOWNANDATTACHTHESWINGBARSTOGETHERWITH

THEHARDWARESHOWN0OSITIONTHE1/2” Nylon Washers (ANK)BETWEENTHEPendulum (ARP)ANDTHEBRACKETS

SEC

1.2

3LIDETHEOTHEROutside Swing Bar (BKS) INTOTHEOTHERENDOFTHEMiddle Swing Bar (BKR) ASSHOWNANDATTACHTHESWINGBARS

TOGETHERWITHTHEHARDWARESHOWN0OSITIONTHE1/2” Nylon Washers (ANK)BETWEENTHEPendulum (ARP)ANDTHEBRACKETS

BKR

BKS

BEWX

BEXX

ANKX

BKR

BKS

BEYX

ARPX

.OTACTUALSIZE

BEW

ANK

ARP

BEY

BEX

BEW

ANK

ARP

BEY

BEX

4 1/2”

.OTACTUALLENGTH

Note: Only ﬁnger tighten the hardware in this step.

NO TOOLS REQUIRED FOR THIS PAGE

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE



SEC

NO NEW HARDWARE REQUIRED FOR THIS PAGE

SEC

1.3

9/16”

Scrap Wood

)NORDERTOSEATTHESWINGBARPOLESSTRIKEEACHENDOFTHESWINGBARVERYHARDlVETOSIXTIMESONAPIECEOFSCRAPWOOD

ORCARDBOARD!FTERTHESWINGBARPOLESHAVEBEENSEATEDTIGHTENTHEHARDWAREFROMSTEPSAND

ATTENTION: THIS STEP CANNOT BE REVERSED!

Note: Do not hit your feet with the pole

sections, as serious injury could occur.

Note: Tighten the hardware from steps 1.1 and 1.2

before continuing to the next step.

WARNING

The Poles must be seated together! They must be struck

on a hard surface ﬁ ve to six times! Failure to seat the

Poles correctly could allow the Poles to separate during

use, which could lead to serious personal injuries or

property damage.

BKS

BKR

BKS

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC



!TTACHTHE3WING(ARDWARETOALLOFTHEBRACKETSONTHE3WING"AR!SSEMBLYASSHOWN0OSITIONTHE1/2” Nylon

Washers (ANK)BETWEENTHEPendulum (ARP)ANDTHEBRACKETS

SEC

1.5

)NSERTTHE3” Round Caps (ASV) INTOTHEENDSOFTHE3WING"AR!SSEMBLYASSHOWN

ASV

ANKX

BEYX

ABBX

BEZX

ARPX

.OTACTUALSIZE

9/16” X

ASVX

.OTACTUALSIZE

BEZ

ANK

ARP

BEY

ABB

BEY

ANK

ARP

BEZ

ABB

A-FRAME ASSEMBLY

HARDWARE REQUIRED

PARTS REQUIRED

TOOLS REQUIRED

SEC

Parts shown at 10% of Actual Size

Hardware shown at Actual Size

ADSX

vXv3CREW

BFBX

vXv"UTTON(EAD3CREW

BFCX

v!CORN.UT

BKMX

)NSIDE"RACKETWITHNOTCHES

BKOX

/UTSIDE"RACKET

ALEX

"OTTOM0OLE

ALFX

-IDDLE0OLE

ALHX

Top Pole

BKQX

!3IDE"RACKET

BKPX

"3IDE"RACKET

BKNX

4URN"AR

5/8” Wrench



Screwdriver



Scrap Wood



7/32” Allen Wrench

INCLUDED

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.1

!LIGNTHEHOLEINTHETop Pole (ALH)WITHTHESLOTINTHEMiddle Pole (ALF)ANDSLIDETHE-IDDLE0OLEINTOTHE4OP

0OLEASSHOWN)NSERTAvXv3CREW!$3THROUGHTHESMALLHOLEINTHE4OP0OLEANDINTOTHESLOTINTHE

-IDDLE0OLEASSHOWN

SEC

2.2

!LIGNTHEHOLEINTHEMiddle Pole (ALF)WITHTHESLOTINTHEBottom Pole (ALE)ANDSLIDETHE"OTTOM0OLEINTOTHE

-IDDLE0OLEASSHOWN)NSERTAvXv3CREW!$3THROUGHTHESMALLHOLEINTHE-IDDLE0OLEANDINTOTHE

SLOTINTHE"OTTOM0OLEASSHOWN

ADS

ALH

ALF

ALH

ALF

ALE

Note: The 1/4” x 3/4” Screw should be ﬂush with the pole, but

will spin freely once installed. Do not jam the poles together

until instructed.

Note: The 1/4” x 3/4” Screw should be ﬂush with the pole, but

will spin freely once installed. Do not jam the poles together

until instructed.

ADS

ALE

ALF

ADSX

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.3

WARNING

The Poles must be seated together! They must be struck

on a hard surface ﬁ ve to six times! Failure to seat the

Poles correctly could allow the Poles to separate during

use, which could lead to serious personal injuries or

property damage.

Note: Do not hit your feet with the pole

sections, as serious injury could occur.

)FTHETop and Middle Poles (ALH & ALF)DONOTCOMPLETELYCOVERTHESLOTSONTHEMiddle and Bottom Poles (ALF & ALE)AFTERSEATING

DO NOT COMPLETE ASSEMBLY#ALLOUR#USTOMER3ERVICE$EPARTMENT

)NORDERTOSEATTHEPOLESSTRIKEEACHENDOFTHEPOLEVERYHARDlVETOSIXTIMESONAPIECEOFSCRAPWOODORCARDBOARD

4HISMUSTBEDONEEVENIFTHEPOLESCOVERTHESLOTSBEFORESEATINGHASOCCURRED

ATTENTION: THIS STEP CANNOT BE REVERSED!

ALH

ALF

ALE

Scrap Wood

NO HARDWARE REQUIRED FOR THIS PAGE

Note: Repeat steps 2.1 through 2.3 to assemble all four

Pole Assemblies before moving to the next step.

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.5

!TTACHAN Outside Bracket (BKO) and an Inside Bracket (with notches) (BKM) TOTHEENDSOFTWOTop Poles (ALH) WITHTHE

HARDWARESHOWN

SEC



,AYTWO0OLE!SSEMBLIESONTHEGROUNDWITHTHEHOLESONTHEPOLESORIENTEDASSHOWN

ALH

ALF

ALE

ALF

ALH

ALE

ALH

BFBX

BFCX

5/8”

BKO

BKM

BFB

BFC

7/32”

Notches

Note: Do not overtighten the hardware in this step.

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.7

!TTACHATurn Bar (BKN)TOTHEASSEMBLED!&RAMEWITHTHEHARDWARESHOWN

SEC

2.6

!TTACHANA-Side Bracket (BKQ) to a Top Pole (ALH)BYlNGERTIGHTENINGTHEHARDWARESHOWN-AKESURETHESTRAIGHTEDGEOFTHE

!3IDE"RACKETISAGAINSTTHEOutside Bracket (BKO)ASSHOWN

Note: Repeat this step to assemble the B- Side Bracket (BKP) to the

other side of the assembly.

Note: Repeat steps 2.4 through 2.7 to assemble

the other A-Frame.

BFBX

BFCX

ALH

BKQ

BFB

BFC

BKQ

BKN

BFB

BFC

BKO

Straight Edge

5/8”

7/32”

Note: Only ﬁnger tighten the hardware in this step.

Page is loading ...

Lifetime 290038 Owner's manual

Brand: Lifetime

Model: 290038

Category: Baby furniture

Type: Owner's manual

Download PDF

report

Lifetime 290038 Owner's manual

Lifetime 290038 Owner's manual

Related papers

Other documents