sauter EGP 100 Assembly Instructions

Type
Assembly Instructions

sauter EGP 100

The sauter EGP100F112 and EGP100F212 are transducers for differential pressure. They are used to measure the differential pressure of gases in ducts or pipes. The measured value is converted into an electrical signal of 0-10 V. The devices have a robust design and are suitable for use in harsh environments. They are easy to install and operate.

Key features:

  • Measuring range: ± 75 Pa (EGP100F112) / ± 150 Pa (EGP100F212)
  • Output signal: 0-10 V
  • Accuracy: ± 1.0 % of full scale
  • Temperature range: -40 to +80 °C
  • Protection class: IP65

Possible use cases:

  • Monitoring of air flow in ventilation systems

sauter EGP 100

The sauter EGP100F112 and EGP100F212 are transducers for differential pressure. They are used to measure the differential pressure of gases in ducts or pipes. The measured value is converted into an electrical signal of 0-10 V. The devices have a robust design and are suitable for use in harsh environments. They are easy to install and operate.

Key features:

  • Measuring range: ± 75 Pa (EGP100F112) / ± 150 Pa (EGP100F212)
  • Output signal: 0-10 V
  • Accuracy: ± 1.0 % of full scale
  • Temperature range: -40 to +80 °C
  • Protection class: IP65

Possible use cases:

  • Monitoring of air flow in ventilation systems
de Dokument aufbewahren
fr Ce document est à conserver
en Retain this document
it Conservare il documento
es Guardar el documento
sv Spara dokumenationen
nl Document bewaren
© SAUTER HeadOffice
Fr. Sauter AG
Im Surinam 55
CH-4016 Basel
Tel. +41 61 - 695 55 55
Fax +41 61 - 695 55 10
www.sauter-controls.com
info@sauter-controls.com
Printed in Switzerland
P100009903 A4/4
5
de www.sauter-controls.com Produkte Material und Umweltdeklartion
fr www.sauter-controls.com Produits Déclaration matériaux et environnement
en www.sauter-controls.com Products Material declaration
it www.sauter-controls.com Products Material declaration
es www.sauter-controls.com Products Material declaration
sv www.sauter-controls.com Products Material declaration
nl www.sauter-controls.com Products Material declaration
B11933
1 2 3 4
1 2 3 4
On
Off
150 ms
U
t
B11942
1 2 3 4
On
Off
220 ms
1 2 3 4
On
Off
800 ms
1 2 3 4
On
Off
5,2 s
4.4
de Filter (t)
fr Filtre (t)
en Filter (t)
it Filtro (t)
es Filtro (t)
sv Filter (t)
nl Filter (t)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

sauter EGP 100 Assembly Instructions

Type
Assembly Instructions

sauter EGP 100

The sauter EGP100F112 and EGP100F212 are transducers for differential pressure. They are used to measure the differential pressure of gases in ducts or pipes. The measured value is converted into an electrical signal of 0-10 V. The devices have a robust design and are suitable for use in harsh environments. They are easy to install and operate.

Key features:

  • Measuring range: ± 75 Pa (EGP100F112) / ± 150 Pa (EGP100F212)
  • Output signal: 0-10 V
  • Accuracy: ± 1.0 % of full scale
  • Temperature range: -40 to +80 °C
  • Protection class: IP65

Possible use cases:

  • Monitoring of air flow in ventilation systems

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages