sauter EGP 100
The sauter EGP100F112 and EGP100F212 are transducers for differential pressure. They are used to measure the differential pressure of gases in ducts or pipes. The measured value is converted into an electrical signal of 0-10 V. The devices have a robust design and are suitable for use in harsh environments. They are easy to install and operate.
Key features:
Possible use cases:
sauter EGP 100
The sauter EGP100F112 and EGP100F212 are transducers for differential pressure. They are used to measure the differential pressure of gases in ducts or pipes. The measured value is converted into an electrical signal of 0-10 V. The devices have a robust design and are suitable for use in harsh environments. They are easy to install and operate.
Key features:
Possible use cases:
sauter EGP 100
The sauter EGP100F112 and EGP100F212 are transducers for differential pressure. They are used to measure the differential pressure of gases in ducts or pipes. The measured value is converted into an electrical signal of 0-10 V. The devices have a robust design and are suitable for use in harsh environments. They are easy to install and operate.
Key features:
Possible use cases:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI