Silvercrest 294829 Owner's manual

Type
Owner's manual
IAN 294829
HOT AIR STYLING KIT
KIT DE PELUQUERÍA DE AIRE CALIENTE SWC 1000 D1
HOT AIR STYLING KIT
Operating instructions
KIT DE PELUQUERÍA DE AIRE CALIENTE
Instrucciones de uso
US - EN Operating instructions Page 1
US - ES Instrucciones de uso Página 21
Before reading, unfold the page containing the illustrations and familiarize yourself with all functions of the
device.
Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas
las funciones del dispositivo.
-
3
!
.
B
A
US-EN 1
SWC 1000 D1
Table of Contents
Introduction .......................................2
Warning types .....................................2
Important safety instructions .........................3
Additional safeguards ...............................5
Important cord information .....................................7
Intended use .......................................7
Items supplied .....................................8
Unpacking ........................................8
Appliance description ...............................9
First use ...........................................9
Operating instructions ..............................10
Connect to power source .................................... 10
Attachment fitting / removal ................................... 11
Turning on /off / Selecting a heat level .......................... 11
Using the attachments ....................................... 12
Cleaning and maintenance ..........................14
Storage ..........................................14
Tips for the perfect hairstyle .........................15
Disposal .........................................15
Disposal of the packaging ................................... 15
Technical specifications .............................16
FCC Compliance Statement ..........................16
Troubleshooting ...................................17
3 year limited warranty ............................18
Distributor ........................................19
2 US-EN SWC 1000 D1
Introduction
Congratulations on the purchase of your new appliance!
You have chosen a modern, high-quality product. These operat-
ing instructions are part of the product. They contain important
information about safety, usage, and disposal. Before using the
product, please familiarize yourself with all operating and safety
instructions. This appliance may only be used as described and
for the purposes indicated. Please also pass these operating in-
structions on to any future owner.
Warning types
The following warning types are used in these operating instruc-
tions:
This is the safety alert symbol. It is used to alert you to
potential injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury and death.
DANGER indicates a hazardous situation that, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
NOTICE indicates information that is considered important, but
not hazardous (e. g. messages related to property damage).
US-EN 3
SWC 1000 D1
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are
present, basic safety precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USE!
KEEP AWAY FROM WATER
DANGER – As with most electrical appliances, electrical parts
are electrically live even when they are turned off:
To reduce the risk of death by electric shock:
1. Always unplug this appliance immediately after you are done
using it.
2. Do not use while bathing.
3. Do not place or store the appliance where it can fall or be
pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. If an appliance falls into water, unplug it immediately. Do not
reach into the water.
WARNING – To reduce the risk of burns, electrocution, fire, or
injury to persons:
1. An appliance should never be left unattended when plugged
in.
2. Close supervision is necessary when this appliance is used
by, on, or near children or individuals with certain disabilities.
3. Use this appliance only for its intended purpose as described
in this manual. Use only accessories/attachments recom-
mended by the manufacturer.
4 US-EN SWC 1000 D1
4. Never operate this appliance if it has a damaged cord or
plug, if it is not working properly, or if it has been dropped,
damaged, or dropped into water.
Return the appliance to a service center for examination and
repair.
5. Keep the cord away from heated surfaces. Do not wrap the
cord around the appliance.
6. Never block the air openings of the appliance or place it on
a soft surface, such as a bed or couch, where the air openings
may be blocked. Keep the air openings free of lint, hair, and
the like.
7. Never use while sleeping.
8. Never drop or insert any object into any opening or hose.
9. Do not use outdoors or operate where aerosol (spray) products
are being used or where oxygen is being administered.
10. Do not use an extension cord with this appliance.
11. Do not direct hot air toward eyes or other heat sensitive
areas.
12. Attachments may be hot during use. Allow them to cool
before handling.
13. Do not place appliance on any surface while it is operating.
14. While using the appliance, keep your hair away from the air
inlets.
15. Do not operate with a voltage converter.
SAVE THESE INSTRUCTIONS
US-EN 5
SWC 1000 D1
ADDITIONAL SAFEGUARDS
Electrocution possible if used or dropped in tub.
Unplug after using.
For household use only.
Never use the appliance near water, and keep it away from
sinks, baths and other similar containers. The proximity of water
is hazardous, even if the appliance is turned off. Always discon-
nect the plug from the electrical outlet after use.
Treated surfaces will be hot during use and
may cause burns. Place hot iron only on flat, non-flammable
surfaces. Do not leave unattended.
CAUTION - THIS PRODUCT CAN BURN EYES!
WARNING - BURN HAZARD - KEEP AWAY FROM CHILDREN
6 US-EN SWC 1000 D1
In event of operating malfunctions and before cleaning the appli-
ance, remove the plug from the power socket.
Disconnect the appliance by pulling on the plug itself, not on the
power cord.
Do not wrap the power cord around the appliance, and protect
the cord from being damaged.
Do not kink or crush the power cord, and route it in such a way
as to prevent people from stepping on or tripping over it.
Never hold the appliance, the power cord or the power plug
with wet hands.
Unplug the appliance immediately after use. The appliance is
completely free of electrical power ONLY when unplugged.
Do not open the housing or attempt to repair the appliance
yourself. Should you do so, the safety of the appliance can no
longer be assured and the warranty will become void. Only
allow authorized technicians to repair a defective appliance.
Ensure that the power cord does not become wet or moist
during use. Route the cord in such a way that it cannot be
crushed or damaged.
Ensure that objects can never penetrate into the inside of the
appliance, particularly metal hair clips, pins or hairpins.
Do not cover the air intake while operating the appliance.
Clean the air intake at regular intervals.
Always use the appliance with the attachments fitted, never
on its own, since the attachment insertion slot becomes hot
during operation.
Allow the appliance to cool down before attaching or
detaching attachments.
Use only the supplied original accessories, since these have
been optimized for interaction with the appliance. Other parts
may not be adequately safe.
US-EN 7
SWC 1000 D1
Keep the air inlet and outlet openings clear to ensure unim-
paired air flow. Otherwise, the appliance may overheat.
Exercise caution when using hair spray, water atomizers, etc.
The air flow may blow these substances directly into your eyes.
Also, these substances must not be allowed to penetrate the
appliance, since they may be flammable, aggressive or electri-
cally conductive.
This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm.
Important cord information
This appliance has a polarized plug. To reduce the risk of electric
shock, there is only one way this plug is intended to fit into a
polarized outlet. If the plug does not completely fit into the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician.
Do not attempt to modify the plug in any way.
Intended use
This appliance is intended for human hair care and only for use in
domestic households.
It is not intended for use on animals or in commercial or industrial
environments.
This appliance is not intended for any other purpose, nor for use
beyond the scope described in these operating instructions.
Claims of any kind for damage resulting from unintended use will
not be excepted. The operator alone bears liability.
8 US-EN SWC 1000 D1
Items supplied
The appliance comes standard with the following components:
Hand set
Storage case
Small round brush
Large round brush
Half round brush
Curling tongs
Double brush
Styling jet
Operating instructions
Check the package for completeness and for signs of visible
damage.
If the delivery is incomplete or damage has occurred as a result
of defective packaging or during transport, contact the customer
service hotline (see 3 year limited warranty section).
Unpacking
Remove all parts of the appliance and the operating instruc-
tions from the box.
Remove all packaging material.
RISK OF SUFFOCATION! Packaging materials
should not be used as a toy. There is a risk of suffocation.
US-EN 9
SWC 1000 D1
Appliance description
Figure A:
Attachment insertion slot
"Cool Shot" switch
Level switch
Power cord
Anti-kink protection
Air intake
Release button
Figure B:
Half-round brush
Curling tongs
Small round brush
- Large round brush
3 Double brush
! Styling jet
. Storage bag
First use
Before using the appliance for the first time, please ensure that
...
the appliance and its accessory parts are in perfect working
condition,
all packaging materials have been removed.
Clean all of the attachments as described under "Cleaning and
maintenance".
10 US-EN SWC 1000 D1
Operating instructions
Connect to power source
This appliance is fitted with a safety connector , which con-
tains a Ground Fault Circuit Interrupter (GFCI). If the appliance
malfunctions (e.g. by coming into contact with water), the GFCI
changes to "off" and the appliance will no longer have power.
If the Ground Fault Circuit Interrupter in the
safety connector is no longer functioning, discontinue use.
Unplug the safety connector and contact the customer service
department.
We recommend testing the safety connector before each use
to make sure it is functioning perfectly:
1) Plug the safety connector into an electrical outlet. Ensure
that the power being supplied from the electrical outlet
matches the voltage specified on the label.
2) Now press the "Test" button . The "Reset" button will jump
out a little more from the safety connector . Now the appli-
ance cannot be turned on again. The Ground Fault Circuit
Interrupter is working.
3) Press the "Reset" button so that it snaps back into place.
You can now use the appliance.
"Reset" button
"Test" button
Safety connector
US-EN 11
SWC 1000 D1
Attachment fitting / removal
After operation, the appliance components
may be hot!
Fitting Attachments
Insert the desired attachment into the attachment insertion slot
, so that the front arrow symbol on the attachment points at
the arrow symbol on the attachment insertion slot .
Turn the attachment clockwise until it clicks into place. The
back arrow on the attachment now points at the arrow on the
attachment insertion slot .
Removing attachments
First turn the appliance off and allow it to cool down.
Press the release button and turn the attachment counter-
clockwise .
The attachment can now be removed by pulling it out of the
attachment insertion slot .
Turning on /off / Selecting a heat level
After you have inserted the required attachment and con-
nected the plug to the power socket, you can turn the appli-
ance on with the level switch and select the output level:
"OFF" The appliance is turned off
"1" for reduced air-flow strength with heat
"2" for high air-flow strength with heat
You turn the appliance off by sliding the level switch to the
"OFF" position.
To fix the styling, you can activate the "Cool Shot" switch .
The styling will be fixed by the cool air stream:
During operation, slide the "Cool Shot" upward.
The air flow will be cooler.
When you want to deactivate the cool air stream, slide the
"Cool Shot" switch downward.
12 US-EN SWC 1000 D1
Using the attachments
Large round brush 11
This attachment gives the hair more volume or large curls.
Wind a slightly damp strand of hair around the large round
brush -.
Turn the appliance on to level 1 or 2.
When the strand is dry, slide the "Cool Shot" switch upward.
Wait until the strand has cooled.
Unwind the large round brush - from the strand.
Proceed with the other strands in the same way.
Small round brush 10
With this attachment you can make your hair curly or wavy.
Wind a slightly damp strand of hair around the small round
brush .
Turn the appliance on to level 1 or 2.
When the strand is dry, slide the "Cool Shot" switch upward.
Wait until the strand has cooled.
Unwind the small round brush from the strand.
Proceed with the other strands in the same way.
US-EN 13
SWC 1000 D1
Curling tongs 9
With this attachment you can put small ringlets (angel curls) into
your hair.
Secure the tip of the strand with the clip on the curling tongs .
Then wind the slightly damp strand of hair around the curling
tongs .
Turn the appliance on to level 1 or 2.
When the strand is dry, slide the "Cool Shot" switch upward.
Wait until the strand has cooled.
Pull the curling tongs out of the strand.
Proceed with the other strands in the same way.
Double brush 12
This attachment is suitable for drying particularly long hair.
Take up a lock of hair near the root using the open double
brush 3, then close the double brush 3and keep it closed.
Turn the appliance on to level 1 or 2.
Pull the hair slowly through the double brush 3 so that the lock
is dried all the way to the ends.
Proceed with the other strands in the same way.
Half-round brush 8
The half-round brush is suitable for combing and simultaneous
blow drying of the hair.
Styling jet 13
With this attachment you can target parts of your hair for styling
and blow-drying.
14 US-EN SWC 1000 D1
Cleaning and maintenance
Always remove the safety connector from the
electrical outlet before cleaning the appliance.
UNDER NO CIRCUMSTANCES should you
immerse the appliance in water or other liquids during cleaning!
After being cleaned, the appliance must be
completely dry before using it again.
Allow the appliance to cool sufficiently before
cleaning it.
Do not use any aggressive cleaning liquids or
solvents. They could damage the surface.
Clean the appliance only with a slightly damp cloth.
Allow the appliance to dry completely before using it again or
before storing it.
If necessary, wipe the storage bag . or the attachments
/// -/3/! with a damp cloth.
Clean the air intake regularly with a soft brush.
Storage
If you plan not use the appliance for an extended period, store
it in the storage bag .. The appliance must be cooled down
for this!
US-EN 15
SWC 1000 D1
Tips for the perfect hairstyle
Only style your hair when it is already almost dry.
Divide your hair into individual strands for more volume.
You will achieve additional volume by starting to dry your hair
at the hairline and working down towards the ends.
After turning the appliance off, wait for a few seconds before
releasing the curl.
Let your hair cool down sufficiently before combing it out.
Fix the hair with a little hairspray.
Disposal
Electrical appliances may not be thrown away as part of normal
household trash. If you can no longer use your electrical appliance,
dispose of it in accordance with the legal provisions applicable
in your state. This will ensure that old electrical appliances are
recycled and environmental pollution is kept to a minimum.
Further information about disposal is available on the Internet
at www.epa.gov.
Disposal of the packaging
The packaging protects the appliance from damage during
transport. The packaging materials have been selected for their
environmental friendliness and ease of disposal, and are therefore
recyclable.
Recycling conserves raw materials and reduces the amount of
waste generated. Dispose of packaging materials that are no
longer needed in accordance with applicable local regulations.
If possible, keep the appliance’s original packaging during the
warranty period so that the appliance can be packed properly
for return shipment in the event of a warranty claim.
16 US-EN SWC 1000 D1
Technical specifications
Supply voltage 125 V ∼, 60 Hz
Power consumption 1000 W
FCC Compliance Statement
This appliance complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This appliance may not cause harmful interference, and (2)
this appliance must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for Class B digital appliances, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
US-EN 17
SWC 1000 D1
Troubleshooting
Problem Cause Solution
The appliance
does not func-
tion.
The plug is not
inserted into a
power socket.
Insert the plug into
a power socket.
The appliance is
not turned on.
Turn the appliance
on.
The appliance is
defective.
In this case,
contact the
customer service
department.
The appliance
does not get
hot.
The "Cool Shot"
switch is in the
upward position.
Slide the "Cool
Shot" switch
downward.
The appliance is
defective.
In this case, contact
the customer
service depart-
ment.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Silvercrest 294829 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages