SCANTECH ID IG200 Configuration Guide

2D Barcode Scanner Setting Manual

2 / 104

2D BARCODE SCANNER SETTING MANUAL ............................................................................................................................... 1

CHAPTER 1 COMPREHENSIVE SETTINGS ................................................................................................................................... 6

ENABLE AND DISABLE THE CONFIGURATION CODE ...................................................................................................................................... 8

SENDING SETTING CODE ........................................................................................................................................................................ 8

RESTORE FACTORY DEFAULT .................................................................................................................................................................. 9

VERSION NUMBER ............................................................................................................................................................................... 9

USER DEFAULT SETTINGS ..................................................................................................................................................................... 10

SOUND SETTINGS .............................................................................................................................................................................. 11

All tone settings ....................................................................................................................................................................... 11

Power-on prompt sound .......................................................................................................................................................... 11

Setting code sound .................................................................................................................................................................. 12

Prompt sound for reading successful....................................................................................................................................... 12

Setting Sound volume for reading successful .......................................................................................................................... 13

READ SUCCESSFUL INDICATOR .............................................................................................................................................................. 13

Setting reading success indicator light .................................................................................................................................... 13

Duration of the indicator light for reading barcode successful ............................................................................................... 14

LIGHTING SETTINGS ........................................................................................................................................................................... 15

Fill light illuminator ................................................................................................................................................................. 15

Aiming light ............................................................................................................................................................................. 16

DATA FORMAT ................................................................................................................................................................................. 17

Data input format .................................................................................................................................................................... 17

Data output format ................................................................................................................................................................. 17

Invoice function ....................................................................................................................................................................... 18

IMAGE RECOGNITION SETTINGS ............................................................................................................................................................ 19

Image inversion (reverse white) setting .................................................................................................................................. 19

NR IS PROMPTED IF THE BARCODE IS NOT SUCCESSFULLY READ ................................................................................................................... 20

CHAPTER 2 COMMUNICATION SETTINGS ............................................................................................................................... 22

INTRODUCTION ................................................................................................................................................................................. 22

USB keyboard interface ........................................................................................................................................................... 22

National keyboard layout ........................................................................................................................................................ 23

USB transmission speed (delay between characters) .............................................................................................................. 24

USB polling speed .................................................................................................................................................................... 25

USB-COM VIRTUAL SERIAL INTERFACE ................................................................................................................................................. 26

USB HID-POS INTERFACE .................................................................................................................................................................. 27

Protocol format ....................................................................................................................................................................... 27

Host send data format ............................................................................................................................................................. 27

Data format sent by scanning device to host .......................................................................................................................... 28

TTL/RS232 SERIAL INTERFACE ............................................................................................................................................................ 29

Baud rate ................................................................................................................................................................................. 30

Parity Type ............................................................................................................................................................................... 31

CHAPTER 3 READING MODE .................................................................................................................................................. 32

MANUAL READING MODE ................................................................................................................................................................... 32

Manual reading mode-single reading time ............................................................................................................................. 32

3 / 104

Manual reading mode-the same barcode reading delay ........................................................................................................ 33

CONTINUOUS READING MODE.............................................................................................................................................................. 36

Continuous reading mode-single reading time ....................................................................................................................... 36

Continuous reading mode-reading interval time ..................................................................................................................... 37

Continuous reading mode-the same barcode reading delay ................................................................................................... 38

INDUCTIVE / AUTO-SENSING READING MODE .......................................................................................................................................... 42

Induction mode-single reading time limit ................................................................................................................................ 42

Induction reading mode-same barcode reading delay ............................................................................................................ 43

Induction mode-image stabilization time ................................................................................................................................ 47

Induction Mode-Sensitivity ...................................................................................................................................................... 48

CHAPTER 4 DATA EDITING ..................................................................................................................................................... 49

INTRODUCTION ................................................................................................................................................................................. 49

CODE ID SETTINGS ............................................................................................................................................................................ 50

Code ID prefix .......................................................................................................................................................................... 50

Code ID prefix order ................................................................................................................................................................. 50

Custom Code ID ....................................................................................................................................................................... 51

USER-DEFINED PREFIX ........................................................................................................................................................................ 54

Send user-defined prefix .......................................................................................................................................................... 54

User-defined prefix setting ...................................................................................................................................................... 55

USER-DEFINED SUFFIX ........................................................................................................................................................................ 56

Send user-defined suffix .......................................................................................................................................................... 56

User-defined suffix setting ....................................................................................................................................................... 57

HIDDEN CHARACTERS ......................................................................................................................................................................... 58

Step 1: Set the field length ....................................................................................................................................................... 58

Step 2: Set the transmission field ............................................................................................................................................ 59

END CHARACTER SETTING .................................................................................................................................................................... 60

Custom end suffix .................................................................................................................................................................... 61

CHAPTER 5 BARCODE PARAMETER SETTING .......................................................................................................................... 62

INTRODUCTION ................................................................................................................................................................................. 62

GLOBAL SETTINGS ............................................................................................................................................................................. 62

Turn on/off all barcodes .......................................................................................................................................................... 62

Turn on/off all 1D barcodes ..................................................................................................................................................... 62

Turn on/off all 2D barcodes ..................................................................................................................................................... 63

UPC-A ........................................................................................................................................................................................... 64

Allow/prohibit reading UPC-A ................................................................................................................................................. 64

Send check character ............................................................................................................................................................... 64

Transmission system characters .............................................................................................................................................. 64

2/5 additional bits ................................................................................................................................................................... 65

Convert UPC-A to EAN-13 ........................................................................................................................................................ 65

UPC-E ............................................................................................................................................................................................ 66

Allow/prohibit reading UPC-E0 ................................................................................................................................................ 66

Send check character ............................................................................................................................................................... 66

Transmission system characters .............................................................................................................................................. 66

Allow/prohibit reading UPC-E1 ................................................................................................................................................ 67

4 / 104

Send check character ............................................................................................................................................................... 67

Transmission system characters .............................................................................................................................................. 67

2/5 additional bits ................................................................................................................................................................... 68

EAN-8 ........................................................................................................................................................................................... 69

ALLOW/PROHIBIT READING EAN-8 ...................................................................................................................................................... 69

Send check character ............................................................................................................................................................... 69

2/5 additional bits ................................................................................................................................................................... 70

EAN-13 ......................................................................................................................................................................................... 71

Allow/prohibit reading EAN-13 ............................................................................................................................................... 71

Send check character ............................................................................................................................................................... 71

2/5 additional bits ................................................................................................................................................................... 72

Convert to ISBN ........................................................................................................................................................................ 73

Convert to ISSN ........................................................................................................................................................................ 73

CODE 128 ....................................................................................................................................................................................... 74

Allow/prohibit reading Code 128 ............................................................................................................................................ 74

CODE 39 ......................................................................................................................................................................................... 74

Allow/prohibit reading Code 39 .............................................................................................................................................. 74

Check character setting ........................................................................................................................................................... 75

Transmission start character and end character ..................................................................................................................... 76

Full ASCII recognition range ..................................................................................................................................................... 76

CODE 32 ......................................................................................................................................................................................... 77

Allow/prohibit reading Code 32 .............................................................................................................................................. 77

CODE 93 ......................................................................................................................................................................................... 78

Allow/prohibit reading Code 93 .............................................................................................................................................. 78

CODABAR（NW-7） ....................................................................................................................................................................... 78

Allow/prohibit reading Codabar .............................................................................................................................................. 78

Check digit setting ................................................................................................................................................................... 79

Start character and stop character setting ............................................................................................................................. 80

INTERLEAVED 2 OF 5 .......................................................................................................................................................................... 81

Allow/Prohibit Interleaved 2 of 5 ......................................................................................................................................... 81

Check character setting ........................................................................................................................................................... 81

MATRIX 2 OF 5 ................................................................................................................................................................................. 82

Allow/ Prohibit read Matrix 2 of 5 ........................................................................................................................................... 82

Check character setting ........................................................................................................................................................... 82

INDUSTRIAL 2 OF 5 ............................................................................................................................................................................ 83

Allow/prohibit reading Industrial 2 of 5 .................................................................................................................................. 83

Check character setting ........................................................................................................................................................... 83

STANDARD 2 OF 5(IATA) ................................................................................................................................................................... 84

Allow/prohibit reading Standard 2 of 5 ................................................................................................................................... 84

Check character setting ........................................................................................................................................................... 84

CODE 11 ......................................................................................................................................................................................... 85

Allow/prohibit reading Code 11 .............................................................................................................................................. 85

MSI PLESSEY .................................................................................................................................................................................... 85

Allow/Prohibit reading MSI Plessey ......................................................................................................................................... 85

QR CODE ........................................................................................................................................................................................ 85

5 / 104

Allow/ Prohibit reading QR Code ............................................................................................................................................. 85

MICRO QR CODE .............................................................................................................................................................................. 86

Allow/prohibit reading Micro QR Code ................................................................................................................................... 86

DATA MATRIX .................................................................................................................................................................................. 86

Allow/prohibit reading Data Matrix ........................................................................................................................................ 86

PDF 417 ........................................................................................................................................................................................ 86

Allow/Prohibit PDF 417 ........................................................................................................................................................... 86

CHAPTER 6 APPENDIX ............................................................................................................................................................ 87

APPENDIX-DATA CODE ....................................................................................................................................................................... 87

APPENDIX-SAVE AND CANCEL SETTINGS ................................................................................................................................................. 89

APPENDIX-DEFAULT SETTING TABLE ..................................................................................................................................................... 90

APPENDIX-CODE ID ........................................................................................................................................................................... 97

APPENDIX-ASCII CODE TABLE .............................................................................................................................................................. 98

6 / 104

Chapter 1 Comprehensive Settings

Introduction

This manual is mainly used to introduce how to set the corresponding functions of the

scanner product;

There are two ways to set up the scanner.

Setting code

The scanner can set the corresponding function by reading the corresponding one or a

group of special barcodes. In the following chapters, we will introduce the corresponding

setting options and functions in detail and provide the corresponding setting codes

7 / 104

Instructions for use:

In manual barcode reading mode, the operation steps for scanning barcodes are as

follows

1. Press and hold the trigger button of the scanner, the line of sight is activated, and a

red line of sight appears.

2. Aim the red line of sight to the center of the barcode, move the scanner and adjust

the distance between it and the barcode to find the best reading distance.

3. When you hear the success prompt sound and the red lighting line goes out, the

code reading is successful, and the scanner transmits the data after reading the code to

the host.

Note: During the reading process, for the same batch of barcodes, you will find that the

distance between the scanner and the barcode is within a certain range, and the

reading success rate will be very high. This distance is the best reading distance.

8 / 104

Enable and disable the configuration code

The setting code can be turned off. When the scanner is set to "Enable setting code" and

scanning the setting code, the setting function will take effect. When the scanner is set to

"Disable setting code", when scanning the setting code, an error tone of the scan engine will

appear and the setting function will not work. The default is "Enable Setting Code".

Enable setting code

Disable setting code

Sending setting code

The content of the setting code can be allowed to be sent. After reading the "send setting

code" and setting successfully, the content will be sent to the host when the setting code is

read; after reading the "do not send setting code" and setting is successful, the scanner will

no longer send the setting code content .

The default is "Do not send setting code"

send setting code

Do not send setting code

9 / 104

Restore factory Default

All scanners have a factory default setting. Reading the "Restore Factory Default" setting bar

code will make all the scanner's properties setting software default state.

Restore factory default

Instructions for use:

You are most likely to use this barcode in the following situations:

1. The scanner settings are incorrect, such as the barcode cannot be recognized.

2. You forgot what settings you made to the scanner before, and you don't want to use the

previous settings.

3. Set the scanner to use some infrequently used functions, and use it after completion.

Version number

Use the scanner to scan the version number barcode, you can view the current scanner

version number information,

version number

10 / 104

User default settings

In addition to the factory settings, users can also save their frequently used configuration as

user default settings. By scanning "Save user default settings", the current configuration

information of the device can be saved as user default settings. If there are already users

Default setting information in the module, the new configuration information after this

operation will replace the original user default setting information.

Save user default settings

recover user default settings

Example: Set the closed EAN-13 code as a user default setting.

Step 1: Scan the barcode of "Enable Setting Code";

Step 2: Scan the bar code "EAN-13 is prohibited";

Step 3: Scan the barcode of "Save User Default Settings";

Step 4: Scan the barcode of "disable Setting Code".

11 / 104

Sound settings

All tone settings

Turn on all sounds

Turn off all sounds

Power-on prompt sound

Turn on or turn off the beep sound when starting up

Turn on sound

Turn off sound

12 / 104

Setting code sound

scan setting code prompt sound on or off

Turn on the setting code sound

Turn off the setting code sound

Prompt sound for reading successful

Set the prompt sound on or off after reading code successful

Turn on sound for reading successful

Turn off sound for reading successful

13 / 104

Setting Sound volume for reading successful

Set the volume of the prompt sound for reading barcode successful

Low sound volume for reading successful

Middle sound volume for reading successful

High sound volume for reading successful

Read successful indicator

Setting reading success indicator light

Turn on reading successful indicator

Turn off reading successful indicator

14 / 104

Duration of the indicator light for reading barcode successful

Read the following setting codes, you can modify the LED prompt time, the default time is

200ms.

Modify the LED prompt time to 100ms

Modify the LED prompt time 200ms

Modify the LED prompt time to 500ms

Customize and modify LED prompt time

Example: Customize and modify the LED prompt time to 300ms, you can set it

according to the following steps:

1. Scan the "Enable setting code" (you don't need to scan when it is turned on);

2. Scan the setting code of "Customize and Modify LED Prompt Time";

3. Scan the "3", "0" and "0" setting codes in turn in "Appendix-Data Code";

4. Scan the "Save" or Cancel setting code in Appendix-Save ;

5. Scan the "Disable Settings code”.

15 / 104

Lighting settings

Fill light illuminator

The illuminator can provide auxiliary lighting for shooting and reading, and the light beam

illuminates the reading target to improve the reading performance and the ability to adapt

to weak ambient light. The user can set it to one of the following states according to the

application environment:

Turn on the fill light illuminator (default setting): The illuminator lights up during

shooting and reading, and goes out at other times.

Illuminator lighting lamp is always on: The lighting lamp will continue to glow after the

engine is turned on.

Turn off the fill light illuminator: the illuminator will not light up under any circumstances.

Turn on the fill light

Turn off the fill light

The fill light is always on

16 / 104

Aiming light

The aiming beam can help users find the best reading distance when shooting and reading.

Users can choose any of the following modes according to the application environment.

The aiming light is turned on by default, and it is blinking.

Turn on the aiming light (default setting): The aiming light flashes during shooting and

reading, and turn off at other times.

The aiming light is always on: After the reading engine is powered on, the aiming beam is

continuously reading

Turn off the aiming light: the aiming light will not light up under any circumstances.

Turn on the aiming light

Turn off the aiming light

Aiming light is always on

17 / 104

Data Format

Data input format

Auto*

GBK（GB2312）

UTF-8

Data output format

GBK code (notepad, Excel, etc.)

Unicode code (WORD, QQ, etc.)

Raw data output

18 / 104

Invoice function

Turn on/off the invoice function

Turn on the invoice function

Turn off the invoice function

19 / 104

Image recognition settings

Image inversion (reverse white) setting

Normal phase bar code: bar code with light background and dark bar

Inverted bar code: dark background, light bar code, also known as reverse white bar code,

reverse color bar code

Allow to read reverse color barcode

Prohibit reading reverse color barcode

Allows to read 1D reverse color barcodes

Prohibit reading 1D reverse color barcodes

Allow to read reverse color code of QR Code

Prohibit reading reverse color code of QR

Allow to read Data Matrix reverse color code

Prohibit reading Data Matrix reverse color

Allow to read PDF 417 reverse color code

Prohibit reading PDF 417 reverse color code

20 / 104

NR is prompted if the barcode is not successfully read

Before releasing the trigger button, if the barcode cannot be read within the timeout period,

it is allowed to send NR (No Read) message. Any feasible prefix or suffix can be attached to

this message

Turn on NR

Turn off NR

Turn on NR: When the code reading is unsuccessful, the button will be released or the code

reading timeout will send the unsuccessful code reading message (the default value is

empty).

Turn off NR: When the code reading is unsuccessful, the message of unsuccessful code

reading will not be sent.

Page is loading ...