2. Ega Master
  3. 60292

Ega Master 60292, 60293 Owner's manual

  • Hello! I've reviewed the user manual for the EGA Master Electric Pipe Cleaner models 60292 and 60293. This document outlines the device's automatic operation, including its adjustable speed and the spring's advance and retract features. I'm here to assist if you have any specific questions about operating your electric pipe cleaner or its capabilities.
  • How do I start the automatic operation?
    How do I choose the direction of the spring?
    How do I engage the spring?
    What should I do after the pipe is clear?
DESATASCADOR ELECTRICO / ELECTRIC PIPE CLEANER / DEBOUCHER
COD.60292
COD.60293
DESATASCADOR ELÉCTRICO
Modelo automático
INSTRUCCIONES DE USO
1.- Para trabajar con el desatascador de manera automática girar el pomo (C) hasta que la
rosca toque fondo.
2.- Moviendo la palanca (B) se escoge el sentido de avance o retroceso del muelle (A).
3.- Presionar el botón (E); el muelle empezará a girar y limpiará la zona obstruida. A su vez
avanzará o retrocederá según lo seleccionado.
4.- Pasos 2 y 3 deben ser repetidos hasta que el tubo esté totalmente desatascado.
5.- Una vez que el tubo esté totalmente limpio, mueva la palanca (B) de posición y presione el
botón (E), el muelle retrocederá a su posición inicial.
Potencia
600W
Voltaje
7.2V
Frecuencia
50Hz/60Hz
Velocidad ajustable
0
-
450 rpm
ELECTRIC PIPE CLEANER
Automatic type
OPERATING INSTRUCTIONS
1.- To work with the electric pipe cleaner with the automatic type turn the knob (C) until the
thread arrives to the bottom.
2.- Moving the lever (B) it can be chosen the direction of the spring (A), advance and back.
3.- Press button (E); the spring will start turning and will clear the obstruction zone. According to
the selection it will advance or move back.
4.- Steps 2 and 3 must be followed until the pipe is totally clean.
5.- Once the pipe is totally clean, move the position of the lever (B) and press the button (E), the
spring will return to the initial position.
600W
Voltage
7.2V
Frequencies
50Hz/60Hz
Adjustable speed
0
-
450 rpm
/