Minka Group P5610-66A User manual

Minka Group
Brand
Minka Group
Model
P5610-66A
Type
User manual

Minka Group P5610-66A is a lighting fixture designed for indoor use. It features a circular strap for easy attachment to a junction box, and a ground screw for added safety. The fixture can accommodate one medium base bulb up to 100 watts, or an equivalent CFL or LED bulb. The installation process is straightforward and only requires a few simple steps, as outlined in the included instructions. The fixture is suitable for use in a variety of indoor settings, including bedrooms, living rooms, and hallways. Its classic design makes it a versatile choice that can complement any décor style.

Minka Group P5610-66A is a lighting fixture designed for indoor use. It features a circular strap for easy attachment to a junction box, and a ground screw for added safety. The fixture can accommodate one medium base bulb up to 100 watts, or an equivalent CFL or LED bulb. The installation process is straightforward and only requires a few simple steps, as outlined in the included instructions. The fixture is suitable for use in a variety of indoor settings, including bedrooms, living rooms, and hallways. Its classic design makes it a versatile choice that can complement any décor style.

Set# A-022-130D
-Circular Strap*1
-Ground Screw*1
-Mounting Screw*2
Glass#PG5610
INSTALLATION INSTRUCTIONS
Item# P5610-66A (New. 19/12/2022)
READ AND SAVE THESE INSTRUCTIONS
W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 1
Fig. 2
PREPARATION (Fig. 1)
1. Shut off
power at the fuse box or circuit breaker box and
remove the old fixture including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the
parts in a clean area. Take care not to misplace any
small parts necessary for installation.
3. Loosen screw（D）to remove circular strap (B).
4. Attach circular strap (B) to Junction box (Not included)
using mounting screws (A) (Size: #8-32N*L1
”). The side
of the circular strap (B) marked “GND” must face out.
CONNECTING THE WIRES (Fig. 2)
5. Connect the electrical wires as shown in (Fig.2). Making
sure that all wire connectors are secured. If your
junction box
has a ground wire (green or bare copper),
connect fixture’s ground wire to it. Otherwise, connect
fixture’s ground wire directly to circular strap (B) using
green screw provided.
6. Tuck wire connectors neatly into the junction box.
COMPLETING THE INSTALLATION (Fig. 1)
7. Place fixture body (E) onto circular strap (B) and secure
with screws (D).
8. Place glass (F) over socket and secure with socket ring
(G).
9. Install (1) medium base bulbs (H) up to 100 watts each
or CFL or LED equivalent (not included) in accordance
with the fixture specification —DO NOT EXCEED THE
MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA
PUISSANCE NOMINALE MAXIMALE!).
Your installation is now complete.
Return power to the
junction box and test the fixture.
Note:
Illustration (Fig. 1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
  • Page 1 1

Minka Group P5610-66A User manual

Minka Group
Brand
Minka Group
Model
P5610-66A
Type
User manual

Minka Group P5610-66A is a lighting fixture designed for indoor use. It features a circular strap for easy attachment to a junction box, and a ground screw for added safety. The fixture can accommodate one medium base bulb up to 100 watts, or an equivalent CFL or LED bulb. The installation process is straightforward and only requires a few simple steps, as outlined in the included instructions. The fixture is suitable for use in a variety of indoor settings, including bedrooms, living rooms, and hallways. Its classic design makes it a versatile choice that can complement any décor style.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents