Oypla 3576 User manual

Type
User manual
User Manual
Mini Exercise Bike
USER MANUAL Model No: 3576
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
This product is not a toy, and is only to be used for its designated purpose.
Never carry out any alterations or modifications to this product.
This product is intended for indoor use only.
Only use this product on stable, level and dry ground.
If at any time during the activity you feel faint, dizzy, experience pain, stop and
consult your physician or doctor.
Make sure loose clothing and hair are kept away from the holes on the side.
This product is not intended for use by persons (including children) with reduced
physical, sensory and mental capacities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the product by
persons responsible for their safety.
Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
If the product is damaged or has any defects, please contact cs[email protected]
USER MANUAL Model No: 3576
USER MANUAL Model No: 3576
Operating Instructions
Parts List:
If you are missing any of the below parts please contact [email protected]
Please be aware that you will be referring to this parts list throughout the assembly process.
USER MANUAL Model No: 3576
2. To attach the pedal to the rotary arm, align
the screw section of the pedal to the hole in
the rotary arm and rotate the nut (found
attached to the side of the pedal) to secure the
pedal into the rotary arm. Make sure you
tighten it into the rotary arm correctly to avoid
the pedal becoming loose easily.
1. Place a base stand over one of the ends of the mini exercise bike, ensuring that the holes in the base
stand align with the holes in the mini exercise bike. After this, place a washer over the hole (as seen in
the image to the top left) and screw the hex cap screw through the baste stand and into the bottom of
the mini exercise bike (as seen in the image to the top right). Repeat this for the other hole in the base
stand. Once done, repeat this step on the opposite side of the mini exercise bike.
Please retain a copy of all instructions for future
consultation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Oypla 3576 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI