Digital Watchdog DWC-MTTWM Wall Mount Quick start guide

Brand
Digital Watchdog
Model
DWC-MTTWM Wall Mount
Category
Camera mounting accessories
Type
Quick start guide

Digital Watchdog DWC-MTTWM Wall Mount is a device designed for mounting fixed lens turret and fixed lens vandal dome cameras. It comes with mounting screws and anchors, camera mounting screws, a mounting template, and a hexagonal wrench for easy installation. The wall mount base can be separated from the metal base using the hexagonal wrench, and the metal base can be secured to the mounting surface using the included screws and anchors. The wall mount base can then be secured to the metal base using the hexagonal wrench and screw.

Digital Watchdog DWC-MTTWM Wall Mount is a device designed for mounting fixed lens turret and fixed lens vandal dome cameras. It comes with mounting screws and anchors, camera mounting screws, a mounting template, and a hexagonal wrench for easy installation. The wall mount base can be separated from the metal base using the hexagonal wrench, and the metal base can be secured to the mounting surface using the included screws and anchors. The wall mount base can then be secured to the metal base using the hexagonal wrench and screw.

Wall mount bracket for fixed lens turret and
fixed lens vandal dome cameras
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
DWC-MTTWM
WHAT’S IN THE BOX
Mounting Screws and Anchors (PA4x25mm, head diameter 8mm) x4
Camera Mounting Screws (PM4x10mm, head diameter 6.6mm) x4
Mounting Template x1
Hexagonal Wrench (3mm) x1
Quick Start Guide
Rev Date: 12/21
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATIONINSTALLATION
1
Separate the wall mount base from the metal base using the hexagonal wrench to
loosen the screw in the wall mount.
2
Using the mounting template or the mounting bracket itself, mark and drill the
necessary holes on the mounting surface.
3
Secure the metal base to the mounting surface using the screws and anchors that
were included with the mount.
4
Secure the wall mount base to the metal base using the hexagonal wrench and screw from step 1.
5 To mount the vandal dome camera to the mounting accessory, remove the dome from the camera base using the wrench
included with the camera.
NOTE: Do not touch the lens when handling the camera.
5
Pass wires through and make all necessary connections.
6
Secure the camera to the mounting bracket using the included screws. See the table below for the length of the screws and
compatible cameras.
Vandal dome camera installation Turret camera installation
7
Adjust the camera’s position and angle by loosening the lock screw at the base of the camera. When the camera’s desired
position is achieved, secure the lock screw back in place to complete the installation. For vandal dome cameras, complete the
installation by placing the dome cover on the camera. Secure the dome cover to the camera base using the screws included
with the camera. See the camera’s QSG for more information.
Vandal dome camera installation Turret camera installation
  • Page 1 1
  • Page 2 2

Digital Watchdog DWC-MTTWM Wall Mount Quick start guide

Brand
Digital Watchdog
Model
DWC-MTTWM Wall Mount
Category
Camera mounting accessories
Type
Quick start guide

Digital Watchdog DWC-MTTWM Wall Mount is a device designed for mounting fixed lens turret and fixed lens vandal dome cameras. It comes with mounting screws and anchors, camera mounting screws, a mounting template, and a hexagonal wrench for easy installation. The wall mount base can be separated from the metal base using the hexagonal wrench, and the metal base can be secured to the mounting surface using the included screws and anchors. The wall mount base can then be secured to the metal base using the hexagonal wrench and screw.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI