Black Box JPM080-R4 Owner's manual

Category
Patch panels
Type
Owner's manual
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
Customer
Support
Information
February 2010
MT1000A-85-R4
BL A C K B OX®
Mount directly to the wall
or on any 19" EIA standard rack.
JPM080-R4 holds equipment occupying up to 4U of vertical space.
JPM082-R4 holds equipment up to 2U high.
Wallmount Patch Panel Brackets
JPM080-R4
JPM082-R4
For installation instructions, turn this page over
Specifications
Mounting: 16" on center
Size: JPM080-R4: 7"H (4U) x 19"W x 8"D
(17.8 x 48.3 x 20.3 cm);
JPM082-R4: 3.5"H (2U) x 19"W x 8"D (8.9 x 48.3 x 20.3 cm)
Weight: JPM080-R4: 6 lb. (2.7 kg);
JPM082-R4: 4 lb. (1.8 kg)
Overview
The Wallmount Patch Panel Bracket-4 (JPM080-R4) and the
Wallmount Patch Panel Bracket-2 (JPM082-R4) can be mounted
directly to the wall. JPM080-R4 holds equipment occupying up
to 4 rack units (4U) of vertical space, and JPM082-R4 holds
equipment up to 2U high.
Whats Included
Your package should contain the following items. If anything
is missing or damaged, contact Black Box Technical Support
at 724-746-5500.
(1) Wallmount Patch Panel Bracket with hinged lip
(8) M5 cage nuts
(8) M5 screws with clear plastic washers
(4) 2" hex head bolts for mounting to wooden studs
This users manual
BL A C K BOX®
FREE, live, 24/7 Tech Support is just 30 seconds away.
724-746-5500 | blackbox.com
© Copyright 2011. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box® and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Double Diamond
is a trademark of BB Technologies, Inc. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective owners.
JPM080-R4, version 1
Installation
To mount the bracket on the wall:
Determine the appropriate mounting location for the bracket.
Insert the included 2" hex head bolts through the keyholes in the rear panel of the bracket and fasten the bolts securely.
NOTE: Use the included M5 cage nuts and screws to mount equipment.
  • Page 1 1
  • Page 2 2

Black Box JPM080-R4 Owner's manual

Category
Patch panels
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI