Geutebruck G-Cam/PoE-Adapter-10 User manual

Category
PoE adapters
Type
User manual

Geutebruck G-Cam/PoE-Adapter-10

The Geutebruck G-Cam/PoE-Adapter-10 is a compact and cost-effective solution for connecting non-PoE cameras to a PoE network. The adapter supports the IEEE 802.3af PoE standard, providing up to 15.4W of power to the camera. This eliminates the need for a separate power supply, simplifying installation and reducing costs.

The adapter also features a 10/100Base-TX Ethernet port, allowing for high-speed data transmission. It is compatible with a wide range of cameras, including Geutebruck's own G-Cam series.

Geutebruck G-Cam/PoE-Adapter-10

The Geutebruck G-Cam/PoE-Adapter-10 is a compact and cost-effective solution for connecting non-PoE cameras to a PoE network. The adapter supports the IEEE 802.3af PoE standard, providing up to 15.4W of power to the camera. This eliminates the need for a separate power supply, simplifying installation and reducing costs.

The adapter also features a 10/100Base-TX Ethernet port, allowing for high-speed data transmission. It is compatible with a wide range of cameras, including Geutebruck's own G-Cam series.

GP-101IT
Maximum performance and actual data rates will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.
Copyright © 2015 Edimax Technology Co. Ltd. All rights reserved. www.edimax.com
IEEE 802.3at Gigabit PoE+ Injector
The Edimax GP-101IT is a Power over Ethernet injector that not only delivers a cost-effective solution for power
distribution, but also provides a seamless way of deployment on the existing LAN infrastructure. With the use of
power injectors, DC power of up to 30W and the data that comes from a non-PoE switch or router are merged
together and then transmitted to the IEEE 802.3at/af compliant products such as PoE dome cameras through the
Ethernet cabling. Hence, preserving your investment in hardware upgrade without the need for buying extra PoE
switches.
IEEE 802.3at/af Power over Ethernet Standard
Because of adding the capability of IEEE 802.3at/af Power over Ethernet to a non-PoE Ethernet switch or router, the
GP-101IT can directly be connected to any IEEE 802.3at/af end-nodes such as PTZ (Pan, Tilt, Zoom) network
cameras, PTZ speed dome, color touch-screen Voice over IP (VoIP) telephones and multi-channel wireless LAN
access points where the IEEE 802.3at/af in-line Power over Ethernet port is supported.
Higher Cost Efficiency and Easy Installation
The Power over Ethernet technology enables the Ethernet wire to carry both data and power. Thus, the GP-101IT
reduces the need for cable installation and eliminates the need for extension cords or electrical outlets on the wall,
ceiling or any unreachable place. In all, it lowers the installation costs and simplifies the deployment effort.
Flexible & Reliable Power Supply
Featuring PoE short circuit protection to safeguard network devices and protect against damage.
KEY FEATURES
Complies with IEEE 802.3af and IEEE 802.3at Power over Ethernet (PoE) Standards
Adds PoE capability to a non-PoE Ethernet switch or router
Gigabit LAN ports provide high-speed connectivity
Supports PoE PSE (Power Source Equipment) device up to 30W
PoE short circuit protection to safeguard network devices
Delivers power and data to PoE device from up to 100 meters (328 feet) over a single Ethernet cable
Reduces installation and equipment costs
Easy plug-and-play desktop or wall-mounted installation
SPECIFICATIONS
Copyright © 2015 Edimax Technology Co. Ltd. All rights reserved.
GP-101IT
IEEE 802.3at Gigabit PoE+ Injector
Hardware
Ports
1 Port RJ-45 10/100/1000Base-T Input Port
1 Port RJ-45 10/100/1000Base-T PoE Output Port
LED Indicators
Power and AC
Power Input
100-240V AC, 50-60 Hz, 0.6A
Power Consumption
30 Watts
Dimensions (L x W x H)
155 × 58 × 36 mm
Weight
185g
Power over Ethernet
Standard
IEEE 802.3af, IEEE 802.3at
Power Output
DC53V/0.55A
Pin Assignment
4/5(+), 7/8(-) Mids-Span (mode B)
Environment
Temperature
Operating: 0 ~ 40
Storage: -40 ~ 70
Humidity (Non-condensing)
Operating: 10 ~ 90%
Storage: 5 ~ 90%
Standards Compliance
Standards
IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
IEEE 802.3ab 1000BaseT Gigabit Ethernet
IEEE 802.3af Power Over Ethernet (PoE)
IEEE 802.3at Power Over Ethernet Plus (PoE+)
Certifications
FCC, CE
APPLICATION DIAGRAM
Maximum performance and actual data rates will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.
Copyright © 2015 Edimax Technology Co. Ltd. All rights reserved. www.edimax.com
Edimax Technology Co., Ltd
6F., No.3, Wu-Chuan 3rd Road, Wu-Gu,
New Taipei City 24891, Taiwan
Edimax Technology Europe B.V.
Fijenhof 2, 5652 AE Eindhoven,
The Netherlands
Edimax Computer Company
3350 Scott Blvd., Bldg.15 Santa Clara,
CA 95054, USA
Wireless AP
High Power
Wireless AP
IP Camera
IP Phone
PTZ/Speed Dome
IP Camera
Video Phone
30W
15W
PoE Injector
PoE Devices
PoE Injector
PoE Injector
Non-PoE Switch
Non-PoE Switch
Data
Data Power
PoE Wireless AP
IP Camera
(Non-PoE
Ethernet-Enabled
Device)
+
+
Data Power Power+Data (PoE)
100M
100M
PoE Splitter
PoE Device
Non-PoE Ethernet-Enabled Device
Data
Data Data
Power
Power Power
Data Power
  • Page 1 1
  • Page 2 2

Geutebruck G-Cam/PoE-Adapter-10 User manual

Category
PoE adapters
Type
User manual

Geutebruck G-Cam/PoE-Adapter-10

The Geutebruck G-Cam/PoE-Adapter-10 is a compact and cost-effective solution for connecting non-PoE cameras to a PoE network. The adapter supports the IEEE 802.3af PoE standard, providing up to 15.4W of power to the camera. This eliminates the need for a separate power supply, simplifying installation and reducing costs.

The adapter also features a 10/100Base-TX Ethernet port, allowing for high-speed data transmission. It is compatible with a wide range of cameras, including Geutebruck's own G-Cam series.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI