2. Glastender
  3. BB48

Glastender BB48, BB48-L1-BSN(LR), BB72, BB96 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Glastender BB48 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Back Bar Coolers
Two, Three and
Four Door Remote
BB48-L1-BSN(LR)
• Remote Unit
• All stainless steel interior construction with radius inte-
rior corners for easy cleaning
• CFC free foamed-in-place insulation
• Galvanized steel sub-top
• Black vinyl-clad steel exterior front and sides
• Stainless steel die cast handle
• Leg sockets recessed into base
• 1/2" thick ABS plastic threshold scuff plate
• 180° swinging doors
Printed in USA Rev. 03-22-10
Specicationssubjecttochangewithoutnotice.Forcurrentspecicationspleasevisitourwebsite.
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Approval/Notes:
Project:
Item #: Qty:
Model #:
4.04
BB__ -_ _-_ _ N(____)
Refrigeration
Hook-Up Location:
L = Left or R = Right
Door Hinge Location†:
(from left to right)
L = Left or R = Right
Base Height:
1 = 1"
6 = 6" Legs
Top Style:
N = No finished top
L = Laminated
S = Stainless
Door Style:
B = Black vinyl-clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass
Size:
48 = 48" Two Door
72 = 72" Three Door
96 = 96" Four Door
AIA#
SIS#
Electrical
• 120V, 1 phase, 60 Hz
• Dedicated 15 amp circuit is required
• 14 gauge wire connection is made inside the cooler next to
evaporator housing - interior access is through on of the 3/4"
side knock-out holes (electrician’s choice)
Refrigeration
• R134a or R404a expansion valve & temperature control
included. Specify type required when ordering.
• Recommended condensing unit:
BB48 - 1/4 HP which has an approximate rating of 2,200
BTU/H at +20ºF evaporator temperature
BB72 and BB96 - 1/3 HP which has an approximate rating of
3,064 BTU/H at +20ºF evaporator temperature
• All refrigeration hookups are made at the installation site
Plumbing
• A six foot length of 1/2" ID by 5/8" OD plastic tubing is pro-
vided to drain condensate. The tubing should exit through one
of the 3/4" side knock-out holes (installer’s choice). The
maximum drainage is one ounce per hour - consult local codes
for compliance - a oor drain may be required
Shelving
• Two adjustable coated shelves and one bottom coated rack per
door included
Legs
• 1-5/8" diameter
• Stainless steel bullet feet
Materials
• 22 gauge stainless steel parts include: interior floor, walls,
ceiling, front of cabinet, and evaporator housing
• 22 gauge black vinyl-clad parts include: sides, standard
doors, and compressor compartment housing
• 22 gauge galvanized steel parts include: exterior
sub-top and back
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base and
compressor compartment base plate
• 16 gauge zinc plated CR steel parts include: leg sockets
• 12 gauge stainless steel parts include: hinges,
hinge brackets, and lock brackets
Standard Features
Specications
NSFstandard7listedforopenfoodstorage
† Specify a hinge location for each door
COMPONENT
Dimensional Information
Remote Back Bar Coolers
BB72
5400NMichiganRd•Saginaw,MI•48604-9780
989.752.4275•800.748.0423•Fax989.752.4444
www.glastender.com
PrintedinUSA
BB48
BB96
Side View All Models
Model Capacity:
12 oz. bottle /
1/2 barrels
Refrigeration Voltage
BB48 13.6cases/
2halfbarrels
1/4H.P.
Recommended
120v/
60Hz/
1phase
BB72 22.2cases/
4halfbarrels
1/3H.P.
Recommended
120v/
60Hz/
1phase
BB96 29.9cases/
5halfbarrels
1/3H.P.
Recommended
120v/
60Hz/
1phase
PlanView
FrontElevation
PlanView
FrontElevation
FrontElevation
PlanView
35"
28 5/8"
12"
1 1/2"
45"
48"
EVAPORATOR
HOUSING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
29 3/4"
21"
DOOR
OPENING
7-1/2"
7 1/2"
35"
28 5/8"
12"
1 1/2"
69"
72"
EVAPORATOR
HOUSING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
DOOR
OPENING
21"
29 3/4"
7 1/2"
35"
39 5/8"
12"
1 1/2"
93"
96"
EVAPORATOR
HOUSING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
DOOR
OPENING
21"
29 3/4"
35"
35"
24"
21"
30 3/4"
25 3/4"
EVAPORATOR
HOUSING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
48"
6"
4 1/2"
4 1/2"
2 3/8"
22 1/2"
25 1/4"
22 3/4"
25 1/4"
180
SWING
WITH OPTIONAL 6" LEGS
STANDARD CABINET
/