![](//vs1.manuzoid.com/store/data-gzf/afb2fd0bc40032fe1f3626b3fe49684a/2/001027187.htmlex.zip/bg1.jpg)
TNC-FemaleSMA-Male
(right angle)
It is recommended to use this cable (BEAM P/N: CBLASY0078xx) to avoid the Transceiver
SMA connector from inadvertently snapping. The proper torque for the cable connector is
between 7 to 10 INCH POUNDS of torque. (81 to 110N-cm, for metric measures). If this value
is exceeded, it’s quite possible to break the connector of the transceiver and voiding the warranty.
LBT Fly Lead for 9522B
Part Number: USRQSG008002