Beam 9522B_SCA Owner's manual

Type
Owner's manual

This manual is also suitable for

TNC-FemaleSMA-Male
(right angle)
It is recommended to use this cable (BEAM P/N: CBLASY0078xx) to avoid the Transceiver
SMA connector from inadvertently snapping. The proper torque for the cable connector is
between 7 to 10 INCH POUNDS of torque. (81 to 110N-cm, for metric measures). If this value
is exceeded, it’s quite possible to break the connector of the transceiver and voiding the warranty.
LBT Fly Lead for 9522B
Part Number: USRQSG008002
  • Page 1 1

Beam 9522B_SCA Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI