Beam 9522B_SCA Owner's manual

TNC-FemaleSMA-Male

(right angle)

It is recommended to use this cable (BEAM P/N: CBLASY0078xx) to avoid the Transceiver

SMA connector from inadvertently snapping. The proper torque for the cable connector is

between 7 to 10 INCH POUNDS of torque. (81 to 110N-cm, for metric measures). If this value

is exceeded, it’s quite possible to break the connector of the transceiver and voiding the warranty.

LBT Fly Lead for 9522B

Part Number: USRQSG008002

This manual is also suitable for

Download PDF