Donco 122-2 Assembly Instructions

Donco
Brand
Donco
Model
122-2
Type
Assembly Instructions

Donco 122-2

The Donco 122-2 Mission Bunk Bed is a versatile and sturdy sleeping solution for children and adults alike. With its twin-full size configuration, it can accommodate a twin mattress on the upper bunk and a full mattress on the lower bunk, providing ample space for sleep and relaxation.

The bed is constructed from durable materials, ensuring stability and longevity. The included guardrails on both long sides of the upper bunk ensure safety for young children, while the sturdy ladder provides easy access to the upper level.

The Donco 122-2 Mission Bunk Bed is designed with convenience in mind. The assembly process is straightforward and can be completed with the included hex screwdriver, eliminating the need for additional tools. Additionally, the bed features pre-drilled holes for easy slat and guardrail attachment, further simplifying the assembly.

Donco 122-2

The Donco 122-2 Mission Bunk Bed is a versatile and sturdy sleeping solution for children and adults alike. With its twin-full size configuration, it can accommodate a twin mattress on the upper bunk and a full mattress on the lower bunk, providing ample space for sleep and relaxation.

The bed is constructed from durable materials, ensuring stability and longevity. The included guardrails on both long sides of the upper bunk ensure safety for young children, while the sturdy ladder provides easy access to the upper level.

The Donco 122-2 Mission Bunk Bed is designed with convenience in mind. The assembly process is straightforward and can be completed with the included hex screwdriver, eliminating the need for additional tools. Additionally, the bed features pre-drilled holes for easy slat and guardrail attachment, further simplifying the assembly.

Thank you for purchasing this quality product.
Be sure to check all packing material carefully
for small parts which may have come loose in-
side the carton during shipment. Separate,
identify and count all parts and hardware.
Compare with the parts list to be sure all parts
are present.
’’DO NOT TIGHTEN SCREWS
UNTIL COMPLETELY ASSEMBLED"
REPLACEMENT PARTS.
Replacement parts, including additional guardrails, may be obtained from place of purchase or original
distribution.
SAFETY WARNINGS!
1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do
not remove warning label from bed.
2- Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood
of entrapment or falls.
3- Surface of mattress must be at least 5 inchess below the upper edge of guardrails.
4- Do not allow children under 6 years of age to use the upper bunk.
5- Prohibit more than one person on upper bunk.
6- Periodically check and ensure that the guardrail, ladder and other components are in their proper posi-
tion, free from damage, and that all connectors are tight.
7- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8- Always use the ladder for enterning and leaving the upper bunk.
9- Do not use substitute parts. Contact manufacturer or dealer for replacement parts.
10- Use of a night light may provide added safety precaution for a child using the upper bunk.
11- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should
be placed against the wall to prevent entrapment between the bed and the wall.
12-Always use guard rails on both long sides of the upper bunk.
13-The use of water or sleep flotation mattresses is prohibited.
14-Keep these instructions for future reference.
15-Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed: for example, but not limited to, hooks, belts, and jump ropes, etc.
IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THE ASSEMBLY
Inst ct o
i
ru ns
ctio s
n
ru
TO OBTAIN PARTS, PLEASE CONTACT: DONCO TRADING COMPANY - FORT WORTH, TEXAS
ASSEMBLY INSTRUCTIONS
SIZE OF MATTRESS AND FOUNDATION (SUPPORT)
The up bed is designed to use a twin mattress ( ) and bunkie board (37 ½ ’’x 74’’). The37 "- 38 " x 74 - 75"½ ½
low bed is designed to use a full mattress (53 "- 54 "x 74"-75") and bunkie board 53 "- 74".½ ½ ½
The total thickness must not exceed 9" inchess.
Note: There must be at least 5" inches from top of mattress to top of guardrails.
V-122-2 - MISSION BUNK BED
TWIN FULL
ASSEMBLY INSTRUCTIONS
V- 122-2 MISSION BUNK BED
Thank you for purchasing this quality product. Be sure to check all packing
material carefully for small parts which may have come loose inside the
carton during shipment. Separate, identify and count all parts and hardware.
Compare with the parts list to be sure all parts are present.
"DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED!
IMPORTANT:
PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY
* Use of power tool to assemble this
product will invalidate any claim and
damage this product making unsafe !!!
* Please assemble on a clean soft
surface to avoid damage.
!
(Hammer)
+
Tools Required
(Not includ)
2:00 h
1
2
3
4
5
6
7
8
9
10
11 12
Part List - V-122-2 MISSION BUNK BED TWIN FULL
Identifying the Hardware part list/- Identify the hardware using the illustrations below.
42
J4,0 x 30 Screw
3,5x16 Screw
Qty
C7,0 x 50 Screw
Qty
19
10 x 40 Wood Dowel
10 x 110 Wood Dowel
1/4 x80 Screw
A
G
Qty
Qty
16
04
Half Moon
BQty
1/4" 16
H
K
E
i
46
01
18
02
02
Hex Screwdriver
Qty
Qty
Qty
Qty
Qty
F
D7,0 x 130 Screw
Qty
16
1
2
1
2
5
6
3
4
SLAT TOP
SLAT BOTTOM
01
X2
X1
X3
X2
H
H
H
H
H
H
H
X5
H
H
ATTENTION !
I
PREDR LLED
KS
MAR
PREDR LLED
KS
MAR
H
H40
10 x 40 Wood Dowel
Qty
H
H
H
H
ATTENTION !
HEAD TOP
H
H
H
H
X2
ATTENTION !
FOOT BOTTOMHEAD/
H
H
H
H
ATTENTION !
FOOT TOP
SIDERAIL FOR UP BED - LADDER SIDE
03 HEADBOARD / FOOTBOARD - TOP
01
Hex Screwdriver
Qty
K
D7,0 x 130 Screw
Qty
08
K
D
K
D
K
DK
D
K
D
K
D
K
DK
D
K
D
K
D
K
DK
D
3
1
4
2
5
6
02 HEADBOARD / FOOTBOARD - BOTTOM
01
Hex Screwdriver
Qty
K
D7,0 x 130 Screw
Qty
08
Postmark
ATTENTION !
Postmark
ATTENTION !
2x
Post #
Post #
Post #
04
H10 x 40 Wood Dowel
Qty
02
08
JQty
10 x 110 Wood Dowel
Qty
04
G
4,0 x 30 Screw
H
G
G
J
J
J
J
G
BOTTON BED - RIGHT
H
G
J
G
J
J
J
BOTTON BED - LEFT
Attention
G
06
05
H10 x 40 Wood Dowel
Qty
04
08
JQty
4,0 x 30 Screw
H
J
J
J
TOP BED
H
H
J
J
J
J
TOP BED
J
H
Half Moon
Qty
1/4" 08 01
Hex Screwdriver
Qty
1/4 x80 Screw
Ax2
A
Ax2
Ax2
Qty
08
Bx2
B
Bx2
Bx2
K
K
K
K
B
B
B
B
BOTTON BED
Ax2
Bx2
J
J
JJ
The first slats must be fixed here
at 3" from each headboard end.
SIDE-RAIL
SLAT
!
J
J
J
J
J
J
J
J
J
07
08
Ex4
K01
Qty
Hex Screwdriver
F02
Qty
BOTTON BED
3.5x16 Screw
E12
Qty
12
Qty
J4,0 x 30 Screw
E
EF
!
INSTALL SLAT KIT WITH SPACER
TAPE TOP (FACING UP).
09
10
Ax2
Ax2
Ax2
C
Bx2
C
C
K
K
K
K
K
Bx2
K
Bx2
B
B
B
B
1/4 x80 Screw
A
Half Moon
Qty
B08
1/4"
K01
Hex Screwdriver
Qty
Qty
08
C7,0 x 50 Screw 05
Qty
TOP BED
Ax2
C
Bx2
KC
J08
Qty
4,0 x 30 Screw
J
J
SIDE-RAIL
LA
ST
!
J
J
JJ
J
J
J
The first slats must be fixed here
at 3" from each headboard end.
!
INSTALL SLAT KIT WITH SPACER
TAPE TOP (FACING UP).
11
12
K
K
Jx3
GUARD
RAIL
K
C
C7,0 x 50 Screw
KHex Screwdriver
J03
04
Qty
Qty
01
Qty
4,0 x 30 Screw
Cx2
K
C
C
Jx3
J03
Qty
4,0 x 30 Screw
13
14
C
C
C
C
C
C
C
7,0 x 50 Screw
Qty
10
K
K01
Hex Screwdriver
Qty
i
i
02
Qty
Ex4
3.5x16 Screw
E04
Qty
SIDE-RAIL
E
15
3.5x16 Screw
E02
Qty
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Donco 122-2 Assembly Instructions

Donco
Brand
Donco
Model
122-2
Type
Assembly Instructions

Donco 122-2

The Donco 122-2 Mission Bunk Bed is a versatile and sturdy sleeping solution for children and adults alike. With its twin-full size configuration, it can accommodate a twin mattress on the upper bunk and a full mattress on the lower bunk, providing ample space for sleep and relaxation.

The bed is constructed from durable materials, ensuring stability and longevity. The included guardrails on both long sides of the upper bunk ensure safety for young children, while the sturdy ladder provides easy access to the upper level.

The Donco 122-2 Mission Bunk Bed is designed with convenience in mind. The assembly process is straightforward and can be completed with the included hex screwdriver, eliminating the need for additional tools. Additionally, the bed features pre-drilled holes for easy slat and guardrail attachment, further simplifying the assembly.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents