USER’S MANUAL
STZ-120T
EU DECLARATION OF CONFORMITY
Hereby, we declare under our sole responsibility that STZ-120T
manufactured by TECH STEROWNIKI, head-quartered in Wieprz Biała
Droga 31, 34-122 Wieprz, is compliant with Directive 2014/35/EU of
the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of Member States relating to the making
available on the market of electrical equipment designed for use within
certain voltage limits (EU OJ L 96, of 29.03.2014, p. 357), Directive
2014/30/EU of the European Parliament and of the Council of 26 February
2014 on the harmonisation of the laws of Member States relating to
electromagnetic compatibility (EU OJ L 96 of 29.03.2014, p.79), Directive
2009/125/EC establishing a framework for the setting of ecodesign
requirements for energy-related products as well as the regulation by
the MINISTRY OF ENTREPRENEURSHIP AND TECHNOLOGY of 24 June
2019 amending the regulation concerning the essential requirements
as regards the restriction of the use of certain hazardous substances in
electrical and electronic equipment, implementing provisions of Directive
(EU) 2017/2102 of the European Parliament and of the Council of 15
November 2017 amending Directive 2011/65/EU on the restriction
of the use of certain hazardous substances in electrical and electronic
equipment (OJ L 305, 21.11.2017, p. 8).
For compliance assessment, harmonized standards were used:
PN-EN IEC 60730-2-9:2019-06, PN-EN 60730-1:2016-10.
Wieprz, 10.03.2021
TECHNICAL DATA
Power supply 230V ± 10%/50Hz
Maximum power consumption 1,5W
Ambient temperature 50C ÷ 500C
90° rotation time 120sec.
The pictures and diagrams are for illustration purposes only.
The manufacturer reserves the right to introduce some hanges.
WARRANTY CARD
TECH company ensures to the Buyer proper operation of the device for the period of 24 months from the date of sale. The Guarantor
undertakes to repair the device free of charge if the defects occurred through the manufacturer’s fault. The device should be delivered to
its manufacturer. Principles of conduct in the case of a complaint are determined by the Act on specic terms and conditions of consumer
sale and amendments of the Civil Code (Journal of Laws of 5 September 2002).
CAUTION! THE TEMPERATURE SENSOR CANNOT BE IMMERSED IN ANY LIQUID (OIL ETC). THIS MAY RESULT IN DAMAGING THE
CONTROLLER AND LOSS OF WARRANTY! THE ACCEPTABLE RELATIVE HUMIDITY OF THE CONTROLLER’S ENVIRONMENT IS 5÷85% REL.H.
WITHOUT THE STEAM CONDENSATION EFFECT. THE DEVICE IS NOT INTENDED TO BE OPERATED BY CHILDREN.
The costs of unjusti able service call to a defect will be borne exclusively by the buyer. The unjusti able service call is de ned as a call
to remove damages not resulting from the Guarantor’s fault as well as a call considered unjusti able by the service after diagnosing the
device (e.g. damage of the equipment through the fault of the client or not subject to Warranty), or if the device defect occurred for reasons
lying beyond the device.
In order to execute the rights arising from this Warranty, the user is obliged, at his own cost and risk, deliver the device to the Guarantor
along with a correctly lled-in warranty card (containing in particular the sale date, the seller’s signature and a description of the defect)
and sales proof (receipt, VAT invoice, etc.). The Warranty Card is the only basis for repair free of charge. The complaint repair time is 14
days.
When the Warranty Card is lost or damaged, the manufacturer does not issue a duplicate.
...................................... ..............................
seller’s stamp date of sale
SAFETY
Before using the device for the rst time the user should read the
following regulations carefully. Not obeying the rules included in
this manual may lead to personal injuries or controller damage. The
user’s manual should be stored in a safe place for further reference.
In order to avoid accidents and errors it should be ensured that
every person using the device has familiarized themselves with the
principle of operation as well as security functions of the controller.
If the device is to be sold or put in a di erent place, make sure that
the user’s manual is there with the device so that any potential user
has access to essential information about the device.
The manufacturer does not accept responsibility for any injuries or
damage resulting from negligence; therefore, users are obliged to
take the necessary safety measures listed in this manual to protect
their lives and property.
WARNING
• The device should be installed by a qualied electrician.
• Any use other than specied by the manufacturer is forbidden.
We are committed to protecting the environment. Manufacturing
electronic devices imposes an obligation of providing for
environmentally safe disposal of used electronic components and
devices. Hence, we have been entered into a register kept by
the Inspection For Environmental Protection. The crossed-out bin
symbol on a product means that the product may not be disposed
of to household waste containers. Recycling of wastes helps to
protect the environment. The user is obliged to transfer their used
equipment to a collection point where all electric and electronic
components.
EN
