2. partyrent com
  3. 2610

partyrent com 2610 User manual

  • Hello! I've reviewed the user manual for the 2610 Wall pot with LED battery lighting. This document provides instructions for operating the device using a remote control, including how to switch the device on and off, select static colors, use color programs, adjust brightness, and set it to standby mode. I'm ready to answer any questions you have about the device.
  • How do I switch on the device?
    How do I select static colors?
    How do I adjust the brightness?
    How to set the device to standby mode?
    How do I switch off the device?
Nürnberg | Stuttgart | Wels (A) | Wien | Basel | Arnheim | Nizza | Paris | Luxemburg | Kopenhagen | Oslo | Malmö | Stockholm
Berlin | Bocholt | Bremen | Dortmund | Düsseldorf / Köln | Frankfurt | Freiburg | Hamburg | Hannover | Kassel | Leipzig | München
User manual 2610 Wall pot Ø72*H107 cm with LED battery
lighting unit
Switch on:
1. Carefully tilt the device on its side and press the switch on the bottom. The device now responds to the
remote control.
Functions:
• Select static colors with the Col- (Dim-) and Col+ (Dim+) keys.
• Select color programs using the Prg+ (Off) and Prg- (Save Off) keys.
• Dimming (to adjust brightness): Press the Shift (On) key in the center and then one of the two left and
right keys. Col- (Dim-) for lower brightness and Col+ (Dim+) for higher brightness. Repeat the process
until the desired brightness level is reached.
• Standby: press the Shift-(On) key in the middle, then press the top Prog+-(Off) key
Switch off:
1. Carefully tilt the device on its side and press the switch on the bottom. The device now no longer
responds to the remote control and is switched off.
/