2. Kentrol
  3. Stainless Steel Gauge Cover

Kentrol Stainless Steel Gauge Cover Installation guide

  • Hello! I've reviewed the installation instructions for the Kentrol Gauge Covers, models 30412 and 30521. The document outlines the process for installing the cover, including removing knobs, drilling mounting holes, and fastening with stainless screws. I'm ready to answer any questions you have about the installation!
  • How do you remove the pull knobs?
    What size drill bit should be used for mounting holes?
    What kind of screws should be used?
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!"#$%&'&!"(%$&
!
!"#$%&'&!"(%$&
&
!
Remove!the!pull!knobs!by!pushing!the!release!clip!at!the!
bottom!of!each!knob.!Place!the!gauge!cover!in!position!mark!
the!four!mounting!holes!using!a!magic!marker.!Drill!with!a!
1/8”!drill!bit!and!then!fasten!using!the!stainless!screws!
provided.!Reinstall!the!pull!knobs!by!pushing!them!on!the!
proper!shaft.!
!
Remove!the!pull!knobs!by!pushing!the!release!clip!at!the!
bottom!of!each!knob.!Place!the!gauge!cover!in!position!mark!
the!four!mounting!holes!using!a!magic!marker.!Drill!with!a!
1/8”!drill!bit!and!then!fasten!using!the!stainless!screws!
provided.!Reinstall!the!pull!knobs!by!pushing!them!on!the!
proper!shaft.!
!
/