Julian Bowen UP10113 Assembly Instructions

Brand
Julian Bowen
Model
UP10113
Type
Assembly Instructions

Julian Bowen UP10113 is a pine bed with a 90 cm width. It is easy to assemble, with an approximate assembly time of 30 minutes and only requiring two people. The bed comes with all the necessary hardware, including wooden dowels, bolts, screws, an Allen key, nuts, and a spacer. It is important to carefully read the instructions before assembling the bed and to keep the hardware in a bowl to avoid losing anything. Additionally, it is recommended to use a sheet or blanket to protect the floor and product during assembly.

Julian Bowen UP10113 is a pine bed with a 90 cm width. It is easy to assemble, with an approximate assembly time of 30 minutes and only requiring two people. The bed comes with all the necessary hardware, including wooden dowels, bolts, screws, an Allen key, nuts, and a spacer. It is important to carefully read the instructions before assembling the bed and to keep the hardware in a bowl to avoid losing anything. Additionally, it is recommended to use a sheet or blanket to protect the floor and product during assembly.

Before you start....
Please carefully unpack and lay out all of the component parts to ensure nothing
is missing and to check each component for any obvious damage.
Should you identify any concerns at this stage please contact the retailer from
whom this product was purchased. Please quote your order number, details of
your issue, the product code, and the batch number from the cartons which will
help to resolve your issue as quickly as possible.
Version Number - 1.0 Product Code - UP10113
0:30min
Tools RequiredApproximate Assembly Time
PINE BED 90CM
ASSEMBLY
INSTRUCTIONS
People Required to Assemble
900cm
998cm
2014cm
Contact Retailer
Please check all hardware matches the list below. Should
you notice any are missing please contact your retailer.
We strongly advise that you do not use Power Tools, such as
drills or electric screwdrivers, during the assembly as this
may cause irreparable damage and will invalidate your
warranty.
EF
A
D
BC
Wooden dowel x4
10 x 40mm
1/4 x 100 Bolt x8
85mm Spacer x1
4 x 30 Screw x24 Allen key x1
Nut 1/4 x8
PARTS
Please ensure you carefully check all the pieces, should you have any
concerns please contact the retailer before assembly commences.
Pelase have your order number, details of the issue, the product code,
and the batch number from the cartons as this will help us to resolve
your issue much faster.
1
01
1
03
1
02
1
04
1
03
12X
ASSEMBLY ADVISE
Please take the time to carefully read through these instructions
before you commence.
Keep these instructions for furure reference.
We advise that the product is assembled in the room it is intended for.
We advise that you keep the hardware in a bowl during assembly to
avoid losing anything.
We strongly recommend that you keep childrem away from the work
area.
Small component parts could choke a child if swallowed.
We recommend you use a sheet a blanket to protect both floor and
product through the assembly stages.
This product is heavy, and we recommend a 2 person lift to avoid
personal injury or damage to the product.
Never push or pull the product as this could cause both personal injury
or irreparable damage to product or floor.
We have tried to make this piece of furniture easy to assemble if the
instructions are followed carefully.
In the unlikely event that you have problems with assembling the
product or have missing or damaged parts, please contact your
retailer and we assist them in rectifying the problem as quickly as
possible.
PLEASE
Remember we strongly urge you DO NOT use power tools such as drill
or eletric screwdrivers as this could cause irreparable damage to
your product and will invalidate your warranty
1
2
A
4x
A
A
A
A
1
1
03
1
1
03
1
01
1
03
1
02
C
C
B
B
C
C
B
B
C
C
B
B
C
C
B
B
1
03
8x
C
B
E
C
B
3
4
D
2x
Next attach the remaining slats.
Place the slats onto the side rail supports and
distribute evenly by using the spacer provided.
D
D
D
D
D
D
D
D
D
D
D
1
04 11X
F
Attach the centre slat first by pushing the side
rails together so that the slat is flush against the
side rail, before inserting the screws.
D
D
1
04
84cm
99cm
F
D
D
22x
D
D
D
D
D
D
D
D
D
D
D
F
GENERAL CARE & MAINTENANCE
We advise that when cleaning the product that a damp cloth is used.
Avoid the use of all household cleaners and abrasive.
Never push or drag the furniture.
Never attempt to move the furniture when fully loaded.
We advise that periodically all fixings are re-tightened.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Julian Bowen UP10113 Assembly Instructions

Brand
Julian Bowen
Model
UP10113
Type
Assembly Instructions

Julian Bowen UP10113 is a pine bed with a 90 cm width. It is easy to assemble, with an approximate assembly time of 30 minutes and only requiring two people. The bed comes with all the necessary hardware, including wooden dowels, bolts, screws, an Allen key, nuts, and a spacer. It is important to carefully read the instructions before assembling the bed and to keep the hardware in a bowl to avoid losing anything. Additionally, it is recommended to use a sheet or blanket to protect the floor and product during assembly.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers