K&H Hangin’ Bucket Booster® Pet Seat User manual

Brand
K&H
Model
Hangin’ Bucket Booster® Pet Seat
Type
User manual
INSTRUCTIONS
How to Install the
Hangin’ Bucket Booster™ Seat:
Place Hangin’ Bucket Booster™ in the
front seat of car. Thread the seatbelt through
the restraint strap located on the back of the
booster seat. Snap seatbelt securely in place.
Place webbing STRAP A around headrest and
adjust booster seat to desired height. Securely fasten
STRAP B around
front seat. For added safety it is
always recommended
to use the provided leash to keep
pet safely in the seat while operating your motor
vehicle. Leash attaches directly to seatbelt with
provided carabiner.
INSTRUCTIONS
Installation du siège
rehausseur Hangin’ Bucket
Booster™:
Placer le siège rehausseur Hangin’ Bucket
Booster™ sur le siège avant du véhicule. Faire
passer la ceinture de sécurité à travers la courroie
de fixation située à l’arrière du siège rehausseur.
Enclencher la ceinture en place. Placer la COURROIE
A autour de l’appuie-tête et ajuster le siège rehausseur
à la hauteur désirée. Fixer de façon sécuritaire la
COURROIE B autour du siège avant. Pour plus de
sécurité, il est recommandé de toujours utiliser la laisse
fournie afin de retenir de façon sécuritaire l’animal au siège
pendant la conduite du véhicule. La laisse se fixe directement
à la ceinture de sécurité avec le mousqueton fourni.
K&H Manufacturing, LLC
Colorado Springs, CO
www.khmfg.com
UPC
Made in China
Fabriqué en Chine
For Indoor Use
Pour une utilisation à
l’intérieur uniquement
K&H Limited One Year Warranty
Our warranty is as follows: K&H Manufacturing warrants to the original consumer, that this product will be free of defects and
workmanship for a period of one year from the date of purchase. The manufacturer’s liability hereunder is limited to replacement of the
product. This warranty is void if the product has been damaged by accident, unreasonable use, neglect, tampering, or other causes
not arising from defects in material or workmanship.
To exercise your warranty: If during the warranty period your product malfunctions, return it to the place of purchase with
your original purchase receipt. If this cannot be done, return the product, postage prepaid, to K&H Manufacturing, with
dated proof of purchase or original date receipt. A return authorization number, obtained by calling (719)591-6950
must accompany all returns to manufacturer. Please include a note explaining the problem when returning the product.
7” ROUND TAG
#7651, #7652
FRONT BACK
  • Page 1 1

K&H Hangin’ Bucket Booster® Pet Seat User manual

Brand
K&H
Model
Hangin’ Bucket Booster® Pet Seat
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Other documents