2. Traceable
  3. 4163

Traceable 4163 Operating instructions

  • I have reviewed the instructions for the Traceable Conductivity Meter RS-232. This document includes crucial steps for preparing the cell prior to use and explains some of the key features of the device, such as its RS-232 output and its auto-ranging capabilities. I am ready to answer any questions you may have regarding this manual.
  • How long should the cell soak in sulfuric acid solution?
    How long should the cell soak in distilled water before use?
2
3
±0.3° Celsius + 1 digit
4
5
— Blinking dash indicates auto-ranging has been disabled
(See Display Messages section for additional messages)
6
7
8
9
10
11
12
13
14
15
16
17
18
19
9. Repeat step 7 using a solution of sulfuric acid for the same period (10
minutes) to obtain a more adherent coating.
10. Soak the cell in distilled water for 48 hours before use.
20
/