ATTENTION!
WARNING!
ENGLISH
PC 1300
Radio Controlled projection Clock
Operating Instructions
Please read and observe the following information and keep the
operating manual nearby for future reference!
Safety information
Onlyusebatteriesofthesametype!
Always treat batteries with due care and attention and only use
batteries as described.
Never use standard and rechargeable batteries together. Never use
rechargeable batteries or standard batteries with different capacities or
charge statuses together. Never use standard or rechargeable batteries
which are damaged.
Riskofsuffocationthroughsmallobjects,packagingandprotectivefoil!
Keep children away from the product and its packaging!
Riskstohealthandtheenvironmentfrombatteries!
Never open, damage or swallow batteries or allow them to pollute the
environment.Theycouldcontaintoxicandecologicallyharmfulheavy
metals.
Preventexposuretoenvironmentalinuences,e.g.smoke,dust,
vibration, chemicals, moisture, heat and direct sunlight.
Onlyallowrepairstobecompletedbyqualiedpersonnel.
PACKAGE CONTENTS
1radiocontrolledclock,1Poweradapterplug,Operatingmanual
OPERATING ELEMENTS
1 ☼/SNOOZE,Touchsensitivebutton.
If„SENSOR“(10)isswitchedtoon,thebuttonwillbeactivatedwhen
your hand is near the button.
2 MODE
3 ▲PresstoswitchbetweenAM/PMand24hour
4 ▼Presstoswitchbetweenweekdayandweeknumber.
Pressandholdtochangeweekdaylanguage.Releasethebutton
atthedesiredlanguage(EN=English).
5
Presstoswitchbetween°Cor°F
6 ALARMON/OFF
7 TEMP
8 0°-180° rotation
9 Focus(80to180cm)
10 SENSOR
11 PROJECTION
12 Battery compartment
13 DC-injack
During initial installation, the unit may take up to an hour or more to
acclimatise to current conditions. It is recommended to put the main
unit in the room where it will be used at least 1 hour prior to initial
installation.
STARTING UP
TheautomaticreceptionoftheDCFradiosignal(DCF77,Timesignal
frequency77,5kHz)startsafterinsertingthebatteries.
DuringthisDCFreceptionprocess,theashingsymbol(
)appearsin
thetimedisplayarea.Thisprocesscantakeupto7minutes.
In case of failure of reception, pleases press “
“ aprox. 3 sec. to
receive again or stop anytime.
ATTENTION: During the reception process no other setting are possible!
Onceradiosignalreceptionissuccessful,thedisplayshowsthesymbol
“radiotower“permanently.Thisclockwillautomaticallysynchronizewith
theradiocontroltowersatthefollowingtime:02:05,03:05,04:05,05:05.
Pleaseobserveaminimaldistanceof2.5mtosourcesofinterference
such as televisions or computer screens.
MANUAL SET-UP
(Theclockautomaticallychangesfromset-upmodetotimedisplaymodeif
nokeyispressedforapprox.30seconds.)
While time is showing, press and hold “MODE“ for approx. 3 sec. until
displayisashing.
Use“▲“or“▲“tosetyear
Press “MODE“toconrm.
Use“▲“or“▲“tosetmonth
Press “MODE“toconrm.
Use“▲“or“▲“tosetdate
Press “MODE“toconrm.
Use“▲“or“▲“tosethour
Press “MODE“toconrm.
Use“▲“or“▲“tosetminute
Press “MODE“toconrm.
To see alarm time and second time
Press “MODE“ to show alarm time A1
Press “MODE“ again to show alarm time A2
Press “MODE“ again to show second time
Press “MODE“ again to show temperature
Alarm and second time set-up
Press “MODE“ to show alarm time A1 or A2
Press and hold key “MODE“forapprox.3sec.untillhoursashes
Use“▲“or“▼“tosethour
Press “MODE“toconrm.
Use“▲“or“▼“tosetminute
Press “MODE“toconrm.
ThesamesettingasforA2andsecondtime.
Alarm on/off
Press “ALARM ON/OFF”,
1
is activated.
Press “ALARM ON/OFF” again,
2
is activated.
Press “ALARM ON/OFF” again,
1
and
2
are activated.
Press “ALARM ON/OFF” again,
1
and
2
are deactivated.
Snooze function
Press the key “SNOOZE/LIGHT“, while the alarm sounds, to activate
the snooze function. If the snooze function is activated, Snooze alarm
symbolisshowing.Thealarmrepeatafter4minutes.Thesnooze
function can be stopped by pressing any key.
Projecting the current time
Thisclockisequippedwithnighttimeprojection.Thetimecanbeprojected
ontoaatsurfaceinaverydarkroom.
Press “SNOOZE / LIGHT” to activate backlight and time projection.
Thecurrenttimewillbeprojectedforapprox.5seconds.
Turn"Focus" to adjust focus.
Turn“0°-180°” to change projection display 180°
Press “TEMP” to switch between the time and temperature
When in use with an AC adapter, switch the ‘PROJECTION’ switch (11)
to ‘ON’ for continuous projection. Switch to ‘AUTO’ for projection on
when the button is pressed.
MOON PHASES
The radio signal (DCF) covers a distance of up to 1500km to Frank-
furt/Main. If, due to bad reception, no RCC automatic time reception
is possible, follow the steps below to set the time manually.
Feature Value
PC1300
W x H x D approx.145x105x38mm
Weight
approx.
220g(withoutbattery)
Power 2x1,5VAA,notincluded
Temperaturerange 0~+50°C
Technical data(Allrightsreserved)
Service hotline
In the case of technical problems, contact our Service hotline. Switzerland:
Tel.0900001675(nationalcharges,Swisscomattimeofgoingtoprint:
CHF2.60/min).Inthecaseofclaimsunderthetermsofguarantee,contact
your sales outlet.
Maintenance
Cleanthesurfaceofthehousingwithasoft,uff-freecloth.Donotuseany
cleaning agents or solvents.
Guarantee
Dexford equipment is produced and tested according to the latest produc-
tionmethods.Theimplementationofcarefullychosenmaterialsandhighly
developed technologies ensure trouble-free functioning and a long service
life.Thetermsofguaranteedonotapplytothebatteriesorpowerpacks
usedintheproducts.Theperiodofguaranteeis24monthsfromthedate
ofpurchase.Alldecienciesrelatedtomaterialormanufacturingerrors
withintheperiodofguaranteewillberedressedfreeofcharge.Rightsto
claims under the terms of guarantee are annulled following tampering by
the purchaser or third parties. Damage caused as the result of improper
handling or operation, normal wear and tear, incorrect positioning or
storage, improper connection or installation or Acts of God and other
externalinuencesareexcludedfromthetermsofguarantee.Inthecase
of complaints, we reserve the right to repair defective parts, replace them
orreplacetheentiredevice.Replacedpartsordevicesbecomeourpro-
perty.Rightstocompensationinthecaseofdamageareexcludedwhere
there is no evidence of intent or gross negligence by the manufacturer. If
your device does show signs of a defect within the period of guarantee,
please contact the sales outlet where you purchased the Dexford device,
producing the purchase receipt as evidence. All claims under the terms
of guarantee in accordance with this agreement can only be asserted at
the sales outlet. No claims under the terms of guarantee can be asserted
after a period of two years from the date of purchase and hand-over of the
product.
Disposal
In order to dispose of your device, take it to a collection point
providedbyyourlocalpublicwasteauthorities(e.g.recycling
centre).Accordingtothelawsonthedisposalofelectronicand
electrical devices, owners are obliged to dispose of old electronic
andelectricaldevicesinaseparatewastecontainer.Theadjacent
symbol indicates that the device must not be disposed of in normal
domestic waste!
You are legally obliged to dispose of power packs and batteries
at the point of sale or in the corresponding containers provided at
collection points by local public waste authorities. Disposal is free of
charge.Thesymbolsindicatethatthebatteriesmustnotbedisposedofin
normal domestic waste and that they must be brought to collection points
provided by local public waste authorities. Packaging materials must be
disposed of according to local regulations.
Declaration of Conformity
ThisdevicefullstherequirementsstipulatedintheDirective
1999/5/EConradioequipmentandtelecommunicationsterminal
equipmentandthemutualrecognitionoftheirconformity.Conformi-
tywiththeabovementioneddirectiveisconrmedbytheCEmarkonthe
device.ToviewthecompleteDeclarationofConformity,pleaserefertothe
free download available on our web site www.dexford.com.
1
234567
13
1210 11
8
9
AA
AA
Waxing
Crescent
Third
quarter
First
quarter
Waning
Gibbous
Waxing
Gibbous
FullMoon
NewMoon
Waning
Crescent
Power adaptor plug
Usingtheenergy-efcientpoweradaptormodelYGS050180D1
(input230V,50Hz,output5V,180mA)