Bosch GEF 7 E Professional Owner's manual

Robert Bosch GmbH

Power Tools Division

70745 Leinfelden-Echterdingen

Germany

www.bosch-pt.com

3 609 929 C46 (2013.06) O / 150 EURO

GEF 7 E Professional

de Originalbetriebsanleitung

en Original instructions

fr Notice originale

es Manual original

pt Manual original

it Istruzioni originali

nl Oorspronkelijke

gebruiksaanwijzing

da Original brugsanvisning

sv Bruksanvisning i original

no Original driftsinstruks

fi Alkuperäiset ohjeet

el Πρωτότυπο οδηγιών χρήσης

tr Orijinal işletme talimatı

pl Instrukcja oryginalna

cs Původní návod k používání

sk Pôvodný návod na použitie

hu Eredeti használati utasítás

ru Оригинальное руководство

по эксплуатации

uk Оригінальна інструкція з

експлуатації

kk Пайдалану нұсқаулығының

түпнұсқасы

ro Instrucţiuni originale

bg Оригинална инструкция

mk Оригинално упатство за работа

sr Originalno uputstvo za rad

sl Izvirna navodila

hr Originalne upute za rad

et Algupärane kasutusjuhend

lv Instrukcijas oriģinālvalodā

lt Originali instrukcija

ar

fa

ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ

ΖЎϩʉ ˒μВЖЙʉʓ ИͳϞφЁʑ

OBJ_DOKU-32997-002.fm Page 1 Tuesday, June 11, 2013 1:10 PM

2 |

3 609 929 C46 | (11.6.13) Bosch Power Tools

Deutsch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seite 6

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10

Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15

Español. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Página 20

Português . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Página 25

Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pagina 29

Nederlands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pagina 34

Dansk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Side 39

Svenska . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sida 43

Norsk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Side 46

Suomi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sivu 50

Ελληνικά . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Σελίδα 55

Türkçe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sayfa 59

Polski . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strona 64

Česky . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strana 69

Slovensky . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strana 73

Magyar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oldal 78

Русский . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Страница 82

Українська . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Сторінка 88

Қазақша . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Бет 92

Română. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pagina 97

Български . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Страница 102

Македонски . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Страна 107

Srpski . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strana 111

Slovensko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stran 116

Hrvatski. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stranica 120

Eesti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lehekülg 124

Latviešu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lappuse 128

Lietuviškai. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Puslapis 133

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

OBJ_BUCH-1841-002.book Page 2 Tuesday, June 11, 2013 1:11 PM

3 |

3 609 929 C46 | (11.6.13) Bosch Power Tools

8

9

12

16

10

13

4

15

5

2

6

7

3

1

14

GEF 7 E

11

16

OBJ_BUCH-1841-002.book Page 3 Tuesday, June 11, 2013 1:11 PM

3 609 929 C46 | (11.6.13) Bosch Power Tools

4 |

A

B

3

16

5

10

OBJ_BUCH-1841-002.book Page 4 Tuesday, June 11, 2013 1:11 PM

5 |

3 609 929 C46 | (11.6.13) Bosch Power Tools

C

D

8

9

12

14

8

9

1

12

13

7

1

12

13

16

E

OBJ_BUCH-1841-002.book Page 5 Tuesday, June 11, 2013 1:11 PM

Page is loading ...

10 | English

3 609 929 C46 | (11.6.13) Bosch Power Tools

Lagerung der Schleifmittel

Lagern Sie die Schleifmittel in der Originalverpackung bei

15 °C – 25 °C Raumtemperatur und 40 % – 70 % Luftfeuch-

tigkeit.

Lagern Sie die Schleifmittel nicht auf Betonböden, in der Nä-

he von offenen Fenstern und Heizungen.

Knicken Sie Schleifbänder nicht, weil diese sonst unbrauch-

bar werden.

Wartung und Service

Wartung und Reinigung

 Ziehen Sie vor allen Arbeiten am Elektrowerkzeug den

Netzstecker aus der Steckdose.

 Halten Sie das Elektrowerkzeug und die Lüftungs-

schlitze sauber, um gut und sicher zu arbeiten.

Entfernen Sie anhaftenden Schleifstaub mit einem Pinsel.

Wenn ein Ersatz der Anschlussleitung erforderlich ist, dann

ist dies von Bosch oder einer autorisierten Kundendienststel-

le für Bosch-Elektrowerkzeuge auszuführen, um Sicherheits-

gefährdungen zu vermeiden.

Kundendienst und Anwendungsberatung

Der Kundendienst beantwortet Ihre Fragen zu Reparatur und

Wartung Ihres Produkts sowie zu Ersatzteilen. Explosions-

zeichnungen und Informationen zu Ersatzteilen finden Sie

auch unter:

www.bosch-pt.com

Das Bosch-Anwendungsberatungs-Team hilft Ihnen gerne bei

Fragen zu unseren Produkten und deren Zubehör.

www.powertool-portal.de, das Internetportal für Handwer-

ker und Heimwerker.

Geben Sie bei allen Rückfragen und Ersatzteilbestellungen

bitte unbedingt die 10-stellige Sachnummer laut Typenschild

des Elektrowerkzeuges an.

Deutschland

Robert Bosch GmbH

Servicezentrum Elektrowerkzeuge

Zur Luhne 2

37589 Kalefeld – Willershausen

Unter www.bosch-pt.com können Sie online Ersatzteile be-

stellen oder Reparaturen anmelden.

Kundendienst: Tel.: (0711) 40040480

Fax: (0711) 40040481

E-Mail: Servicezentrum.Ele[email protected]

Anwendungsberatung: Tel.: (0711) 40040480

Fax: (0711) 40040482

E-Mail: Anwendungsbe[email protected]ch.com

Österreich

Tel.: (01) 797222010

Fax: (01) 797222011

E-Mail: service.elektrowerkzeuge@at.bosch.com

Schweiz

Tel.: (044) 8471511

Fax: (044) 8471551

E-Mail: [email protected]h.com

Luxemburg

Tel.: +32 2 588 0589

Fax: +32 2 588 0595

E-Mail: outillage.gere[email protected]osch.com

Entsorgung

Elektrowerkzeuge, Zubehör und Verpackungen sollen einer

umweltgerechten Wiederverwertung zugeführt werden.

Werfen Sie Elektrowerkzeuge nicht in den Hausmüll!

Nur für EU-Länder:

Gemäß der Europäischen Richtlinie

2012/19/EU über Elektro- und Elektronik-

Altgeräte und ihrer Umsetzung in nationales

Recht müssen nicht mehr gebrauchsfähige

Elektrowerkzeuge getrennt gesammelt und

einer umweltgerechten Wiederverwertung

zugeführt werden.

Änderungen vorbehalten.

English

Safety Notes

General Power Tool Safety Warnings

Read all safety warnings and all in-

structions. Failure to follow the warnings

and instructions may result in electric shock, fire and/or seri-

ous injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

Work area safety

 Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

 Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases or

dust. Power tools create sparks which may ignite the dust

or fumes.

 Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

Electrical safety

 Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

 Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators.

WARNING

OBJ_BUCH-1841-002.book Page 10 Tuesday, June 11, 2013 1:11 PM

English | 11

Bosch Power Tools 3 609 929 C46 | (11.6.13)

There is an increased risk of electric shock if your body is

earthed or grounded.

 Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric

shock.

 Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges and moving parts. Damaged

or entangled cords increase the risk of electric shock.

 When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. Use of a cord suitable

for outdoor use reduces the risk of electric shock.

 If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected

supply. Use of an RCD reduces the risk of electric shock.

Personal safety

 Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the influence of drugs,

alcohol or medication. A moment of inattention while op-

erating power tools may result in serious personal injury.

 Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal inju-

ries.

 Prevent unintentional starting. Ensure the switch is in

the off-position before connecting to power source

and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or en-

ergising power tools that have the switch on invites acci-

dents.

 Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.

 Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

 Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

 If devices are provided for the connection of dust ex-

traction and collection facilities, ensure these are con-

nected and properly used. Use of dust collection can re-

duce dust-related hazards.

Power tool use and care

 Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

 Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

 Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other

condition that may affect the power tool’s operation. If

damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power

tools.

 Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

 Use the power tool, accessories and tool bits etc. in ac-

cordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

Service

 Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Sander

 Hold power tool by insulated gripping surfaces, be-

cause the belt may contact its own cord. Contact a “live”

wire may make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

 Use the machine only for dry sanding. Penetration of wa-

ter into the machine increases the risk of an electric shock.

 Apply the machine to the workpiece only when

switched on and switch the machine off only after it has

been lifted away from the workpiece. The power tool

can move suddenly.

 Never touch the running sanding belt. Danger of injury.

 Pay attention that no persons are put at risk through

sparking. Remove any combustible materials in the vi-

cinity. Sparking occurs when sanding metal materials.

 Do not use worn, torn or heavily clogged sanding belts.

Damaged sanding belts can tear apart, be thrown from the

machine and injure somebody.

 Prevent dust accumulation at the workplace. Dusts can

easily ignite.

 Regularly clean the power tool’s air vents. The motor’s

fan will draw the dust inside the housing and excessive ac-

cumulation of powdered metal may cause electrical haz-

ards.

 When working with the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

OBJ_BUCH-1841-002.book Page 11 Tuesday, June 11, 2013 1:11 PM

12 | English

3 609 929 C46 | (11.6.13) Bosch Power Tools

 Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

Products sold in GB only: Your product is fitted with an

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-

tions

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

The power tool is intended for dry sanding, structuring and

polishing metal.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 Adjustment screw for belt run

2 Spindle lock

3 Auxiliary handle (insulated gripping surface)

4 On/Off switch

5 Clamping lever for sanding attachment

6 Thumbwheel for belt speed preselection

7 Drive roller

8 Attachment cover

9 Fastening screw for attachment cover

10 Sanding attachment

11 Guide element*

12 Sanding belt*

13 Guide roller

14 Supporting surface

15 Handle (insulated gripping surface)

16 Sanding arm*

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Noise/Vibration Information

Measured sound values determined according to EN 60745.

Typically the A-weighted noise levels of the product are:

Sound pressure level 89 dB(A); Sound power level

100 dB(A). Uncertainty K =3 dB.

Wear hearing protection!

Vibration total values a

h

(triax vector sum) and uncertainty K

determined according to EN 60745:

a

h

=2m/s

2

, K=1.5 m/s

2

.

The vibration emission level given in this information sheet

has been measured in accordance with a standardised test

given in EN 60745 and may be used to compare one tool with

another. It may be used for a preliminary assessment of expo-

sure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained,

the vibration emission may differ. This may significantly in-

crease the exposure level over the total working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working pe-

riod.

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep hands warm, organise work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product de-

scribed under “Technical Data” is in conformity with the fol-

lowing standards or standardization documents: EN 60745

according to the provisions of the directives 2011/65/EU,

2004/108/EC, 2006/42/EC.

Electric File GEF 7 E

Article number

3 601 HA8 0..

Rated power input

W720

Belt speed at thumbwheel setting

–1

–2

–3

–4

–5

–6

m/s

3.5

5.0

7.0

9.0

10.5

12.0

Sanding belt length

mm 457

Sanding belt width

mm 6/13/20

Belt speed preselection



Soft start



Weight according to

EPTA-Procedure 01/2003

kg 2.0

Protection class

/II

The values given are valid for a nominal voltage [U] of 230 V. For differ-

ent voltages and models for specific countries, these values can vary.

OBJ_BUCH-1841-002.book Page 12 Tuesday, June 11, 2013 1:11 PM

English | 13

Bosch Power Tools 3 609 929 C46 | (11.6.13)

Technical file (2006/42/EC) at:

Robert Bosch GmbH, PT/ETM9

D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

08.06.2013

Assembly

 Before any work on the machine itself, pull the mains

plug.

Dust/Chip Extraction

 Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health. Touching or breathing-in the dusts can cause

allergic reactions and/or lead to respiratory infections of

the user or bystanders.

Certain dusts, such as oak or beech dust, are considered

as carcinogenic, especially in connection with wood-treat-

ment additives (chromate, wood preservative). Materials

containing asbestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

 Prevent dust accumulation at the workplace. Dusts can

easily ignite.

Mounting the Auxiliary Handle (see figure A)

 Operate your machine only with the auxiliary handle 3.

Screw the auxiliary handle 3 on the right or left of the machine

head depending on the working method.

Adjusting the Sanding Attachment (see figure B)

– Before adjusting the sanding attachment 10, completely

release clamping lever 5.

– Move the sanding attachment 10 accordingly to suit your

working conditions and working position.

– Close the clamping lever 5 and tighten it firmly.

Note: Clamping lever 5 is indexed (adjustable), allowing it to

be set to an ergonomically favourable or space-saving posi-

tion.

With the clamping lever 5 tightened, pull its lever away from

the machine head, turn it to the desired position and allow it

to engage again.

Changing the Sanding Belt (see figure C)

– Loosen fastening screw 9 and remove the attachment cov-

er 8.

– Press sanding attachment 10 via the supporting surface 14

against a sturdy object (e. g. a bench top) until the sanding

attachment 10 deflects. Remove the sanding belt 12.

– Firstly, position the new sanding belt 12 around on the

drive roller 7 and then around the deflection roller 13. Pay

attention that the arrow directions on the inside of the

sanding belt (if given) and on the attachment cover 8 of the

power tool correspond. Release the sanding attachment

10 again, so that the sanding belt 12 is tensioned.

– Mount the attachment cover 8 with fastening screw 9.

– Adjust the belt run as required, see section “Adjusting the

Belt Run”.

Adjusting the Belt Run (see figure D)

 Adjust the belt run only when the power tool is

switched off and disconnected from the power supply.

Turn adjustment screw 1 until the sanding belt 12 is posi-

tioned centred on deflection roller 13.

Selecting the Sanding Belt

Depending on the material to be worked and the required rate

of removal, different sanding belts are available:

Note: Depending on the application method and the material

being worked, either flexible of stiff sanding belts can be

used.

Changing the Sanding Arm (see figure E)

– Remove the sanding belt 12 (see section “Changing the

Sanding Belt”).

– Unscrew adjustment screw 1 and remove the sanding arm

16.

– Mount the new sanding arm 16 and fasten it with adjust-

ment screw 1.

– Pay attention that the sanding arm 16 is correctly mounted

according to figure E.

– Mount the sanding belt 12 (see section “Changing the

Sanding Belt”).

– Adjust the belt run (see section “Adjusting the Belt Run”).

Operation

Starting Operation

 Observe correct mains voltage! The voltage of the

power source must agree with the voltage specified on

the nameplate of the machine. Power tools marked

with 230 V can also be operated with 220 V.

Switching On and Off

To start the power tool, push the On/Off switch 4 forwards.

To switch off the machine, push On/Off switch 4 toward the

rear.

To save energy, only switch the power tool on when using it.

Henk Becker

Executive Vice President

Engineering

Helmut Heinzelmann

Head of Product Certification

PT/ETM9

Grain size

For dry sanding and pre-sanding coarse 40, 60

For structuring and for smoothing

out minor unevenness medium 80, 120

For fine structuring fine

180

Fleece belts

Polishing Fleece belts

OBJ_BUCH-1841-002.book Page 13 Tuesday, June 11, 2013 1:11 PM

14 | English

3 609 929 C46 | (11.6.13) Bosch Power Tools

Preselecting the Belt Speed

 Operate with a belt speed adapted to the application, in

order to prevent damage to the material.

The required belt speed can be adjusted with the thumbwheel

for belt speed preselection 6 (even during operation).

The required belt speed depends on the material being sand-

ed and on the working conditions, and can be determined by

practical testing.

 When using a fleece belt, do not work with a higher set-

ting than speed stage 4 (max.). Otherwise, the fleece

belt will become too hot.

Working Advice

When sanding, the removal capacity and the surface quality

are mainly determined by the sanding belt selection as well as

through the preselected belt speed.

Work with the lowest possible sanding pressure in order to in-

crease the service life of the sanding belts. Excessively in-

creasing the sanding pressure does not lead to a higher sand-

ing capacity, but to more wear of the power tool and the

sanding belt.

Work with moderate feed and perform the sanding parallel

and overlapping with respect to the sanding paths.

To achieve a perfect surface, do not skip more than one grain

size when selecting the sanding belt.

Use only original Bosch sanding accessories.

Only flawless sanding belts achieve good sanding capacity

and make the machine last longer.

 Do not clamp power tools in the saw stand. Clamped

power tools and sharp-edged application tools may result

in serious injury.

Storage of the Sanding Belts

Store sanding belts in their original packaging at

15 °C – 25 °C room temperature and 40 % – 70 % humidity.

Do not store sanding belts on concrete floors, close to open

windows or heaters.

Do not bend or kink the sanding belts, otherwise they will be-

come unusable.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the machine itself, pull the mains

plug.

 For safe and proper working, always keep the machine

and ventilation slots clean.

Remove adherent sanding dust with a brush.

If the replacement of the supply cord is necessary, this has to

be done by Bosch or an authorized Bosch service agent in or-

der to avoid a safety hazard.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions

concerning our products and their accessories.

In all correspondence and spare parts order, please always in-

clude the 10-digit article number given on the type plate of

the machine.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: (0844) 7360109

Fax: (0844) 7360146

E-Mail: boschse[email protected]

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: (01) 4666700

Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: (01300) 307044

Fax: (01300) 307045

Inside New Zealand:

Phone: (0800) 543353

Fax: (0800) 428570

Outside AU and NZ:

Phone: +61 3 95415555

www.bosch.com.au

Republic of South Africa

Customer service

Hotline: (011) 6519600

Gauteng – BSC Service Centre

35 Roper Street, New Centre

Johannesburg

Tel.: (011) 4939375

Fax: (011) 4930126

E-Mail: [email protected]

OBJ_BUCH-1841-002.book Page 14 Tuesday, June 11, 2013 1:11 PM

Page is loading ...

3 609 929 C46 | (11.6.13) Bosch Power Tools

148 |

2 608 000 591

2 608 000 592

2 608 000 594

2 608 000 595

2 608 438 691

2 608 000 593

OBJ_BUCH-1841-002.book Page 148 Tuesday, June 11, 2013 1:11 PM

| 149

Bosch Power Tools 3 609 929 C46 | (11.6.13)

2 608 608 J23

2 608 608 J24

2 608 608 J25

2 608 608 J26

G60

2 608 608 J22

G40

G80

G120

G180

13 x 457 mm,

6 x 457 mm,

20 x 457 mm,

13 x 457 mm,

6 x 457 mm,

20 x 457 mm,

13 x 457 mm,

6 x 457 mm,

20 x 457 mm,

457 mm

20 mm

2 608 608 J81

2 608 608 J90

2 608 608 J69

2 608 608 J80

2 608 608 J89

2 608 608 J68

2 608 608 J79

2 608 608 J88

2 608 608 J67

2 608 608 J10

2 608 608 J11

2 608 608 J12

G60

2 608 608 J09

G40

G80

G120

457 mm

13 mm

2 608 608 H94

2 608 608 H95

2 608 608 H96

G60

2 608 608 H93

G40

G80

G120

2 608 608 J60

2 608 608 J61

2 608 608 J62

G120

2 608 608 J59

G80

G180

G240

2 608 608 J48

2 608 608 J49

2 608 608 J50

G120

2 608 608 J47

G80

G180

G240

2 608 608 J32

2 608 608 J33

2 608 608 J34

G120

2 608 608 J31

G80

G180

G240

457 mm

6 mm

457 mm

20 mm

13 mm

6 mm

457 mm

20 mm

13 mm

6 mm

457 mm

20 mm

13 mm

6 mm

OBJ_BUCH-1841-002.book Page 149 Tuesday, June 11, 2013 1:11 PM

Bosch GEF 7 E Professional Owner's manual

This manual is also suitable for

Bosch GEF 7 E Professional Owner's manual

in other languages

Related papers

Other documents