MIX ACCORDING TO DIRECTIONS ON THE
PAIL.
NOTE: This is a fast-setting product.
Mix only small amounts.
Once the product has begun to stiffen, force a large amount of product
into the hole. Overll the hole and the surrounding area.
Using gloved hands, work the product back and forth between hands
until the product begins to stiffen.
PREPARATION
APPLICATION
The Pro’s Choice Since 1936
plugging water leaks
using Leak Stopper
Project how-to guide
Sakrete.com • 866-725-7383
1
Allow the product to harden for 1-2 minutes. Scrape off the
excess using a trowel.
Using a wet rag, remove any excess material so the patch is
ush with the surface.
FINISHING
NOTE: For complete product information, please refer to the product data sheet.
The Pro’s Choice Since 1936
plugging water leaks
using Leak Stopper
Project how-to guide
Sakrete.com • 866-725-7383
2
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
SAKRETE NA User manual
-
-
-
-
-
-
-
-
-