2. Christie
  3. CP4230
CP4230

Christie CP4230, CP2230, D4K35, Duo User manual

  • Hello! I am an AI chatbot trained to assist you with the Christie CP4230 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Lamp Power Supply Cross-Connection Fire Hazard Addendum 1
020-101140-01 Rev. 1 (03-2013)
Lamp Power Supply Cross-
Connection Fire Hazard
Verify the Correct Connection
Make sure that a cross-connection does not exist.
1. Turn one projector and its LPS on and confirm that they are connected and operating correctly.
2. Turn the second projector and its LPS on and confirm that they are connected and operating
correctly.
Technical Support
North and South America: +1-800-221-8025 or [email protected]
Europe, Middle East, and Africa: +44 (0) 1189 778111 or t [email protected]
Asia Pacific: [email protected]
Applies to the Following Products Prepared For
• CP2230
• CP4230
• D4K35
• D4K3560
• Christie Duo
• Internal and External Operators and Service
Technicians
• External Customers
In a multi-projector installation there is a risk of a Fire Hazard if the high current DC
cables and interlock/control cables are incorrectly cross-connected between the Projector
Heads and Lamp Power Supplies. Make sure the high current DC Leads and interlock/control
cables are correctly connected between the Lamp Power Supply (LPS) and its corresponding
projector. Failure to comply may result in a Fire Hazard.
/