Draper Ladder Car Roof Clamps Operating instructions

Assemble components as shown above to make two rack clamps (padlock not included).

Always use rack clamps in pairs, one at the front and one at the rear of the vehicle.

Pass the threaded hook down through the ladder and under the roof rack bar. Spin the handle

down the thread clamping the tube down on to the ladder until the ladder is held secure and

cannot move.

Do not overtighten as this will result in damage to both your roof rack and the rack clamp.

Regular lubrication of thread will prolong the life of the clamp.

INSTRUCTIONS FOR

Ladder

Roof Rack Clamps

Stock No.24807 Part No.LRC

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND

EFFECTIVE USE OF THIS PRODUCT.

DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YF. U.K. www.drapertools.com e-mail: [email protected]

DBDH150118