![](//vs1.manuzoid.com/store/data-gzf/dcb4728261c9a18c09f2651824a9d700/2/000981267.htmlex.zip/bg2.jpg)
1. Three parts of items B and One part item C screw with a simple twisting motion into each other to form
the handle of the carpet sweeper.
2. Securely screw the bottom portion of item B into item A.
3. Item D (cleaning brush for bristles) snaps onto the front of the handle at the bottom above the sweeper.
4. To empty – 1. Turn over sweeper and push down on refuse compartment towards the center using the
indents provided to open (see image 1 and 2).
2. After emptying both compartments use the attached brush to clean any remaining refuse from
middle and side sweeper bristles (see image 3).
A
B
1
2
3
D
D
A B C
D
D
B
B
C
1X 3X 1X
1X