Page is loading ...
Model 29112 General assembly and installation instructions:
10-30-07
REQUIRED ITEMS (NOT INCLUDED)
PHILLIPS SCREWDRIVER
WARNING:
• This lighting fixture is for indoor use only.
• For under cabinet or under shelf installation where the mounting surface is at least ½” thick.
• Not for use with plastic furniture.
• Do not install in an enclosed cabinet.
• Do not mount over a sink or stove.
• Do not touch hot lens.
• Use only insulated staples or plastic to secure cords (not included).
• Use ONLY the supplied LED transformer to power fixture.
• Transformer cable is not intended for use through or concealed behind walls, floors or ceilings.
Installation:
1) Determine desired location for mounting fixture.
• When doing this keep in mind distance from fixture to receptacle and that mounting surface should be a
minimum of 1/2” thick.
2) Hold fixture housing in desired position and mark position of mounting holes.
3) Attach fixture to surface with screws.
4) Plug the transformer cord into fixture and then plug transformer into outlet.
Page is loading ...
Page is loading ...
/
