BOND MANUFACTURING 70052 Installation guide

INSTALLING YOUR NOZZLE

• Remove nozzle from package and ties.

• Place nozzle on male end of the nozzle.

• Turn until nozzle is snug. Do not overtighten.

CARE AND USE OF YOUR NOZZLE

• IMPORTANT: This nozzle is intended for normal lawn and garden use.

• For proper use, allow water to flush through nozzle for several minutes before using.

• DO NOT RUN HOT WATER THROUGH THIS NOZZLE.

• Do not leave nozzle under pressure when not in use.

• Drain your nozzle in the summer when you are not using it and keep it shaded as much

as possible.

• Protect your nozzle from harsh winter weather by storing it indoors. Be sure to drain the

nozzle completely before storing as water remaining in the nozzle can freeze, damaging

the nozzle.

• WARNING: Do not spray water into an electrical outlet. Severe electrical shock could

result.

• ONLY USE A DRINKING WATER SAFE NOZZLE FOR DRINKING WATER PURPOSES

• Do not drink from this nozzle if there is a possibility of its exposure to any conditions

which can be harmful to humans such as mold & bacteria, lawn & garden chemicals,

animal waste, insects, stagnant water or other harmful substances.

WARRANTY

3 YEAR WARRANTY AGAINST MANUFACTURER’S DEFECT IN MATERIALS & WORKMANSHIP

Questions or concerns?

Do not return this product to the store. Please contact Bond Manufacturing directly for support

at 1-866-771-BOND (2663) M-F from 8:00 am to 4:30 pm PST.

We are committed to delivering high quality products and services to you.

Thank you for your purchase!

Download PDF