Haier HWR06XC6 User manual

Haier
Brand
Haier
Model
HWR06XC6
Type
User manual

This manual is also suitable for

Haier HWR06XC6 is a versatile air conditioner with a range of features to keep you comfortable. It has two-way airflow, easy-access filters, and a control panel for simple operation. You can choose between fan, cooling, and dehumidification modes, and set the fan speed to low or high. The unit also features a programmable timer, sleep mode, and automatic restart function. Maintenance is easy, with a washable air filter and a self-cleaning function.

Haier HWR06XC6 is a versatile air conditioner with a range of features to keep you comfortable. It has two-way airflow, easy-access filters, and a control panel for simple operation. You can choose between fan, cooling, and dehumidification modes, and set the fan speed to low or high. The unit also features a programmable timer, sleep mode, and automatic restart function. Maintenance is easy, with a washable air filter and a self-cleaning function.

(ESA3056 Only)
HWR06XC6,ESA3056
HWF06XC5
0010551960
1
1
2
4
4
5
5
6-7
8-13
8
8-13
14-18
15
15
16-18
19-20
20-21
22
Test power plug before each use:
1. Press ìreset ìbutton.
2 . Press ìtest ìbutton, unit should trip.
3. Press ìresetî button again for use .
Do not use if above test fail.
In the event this device trips , the cause of the malfunction is to
be corrected before further use of the device .
Important:
5
10. How The Unit Drains
2-way airflow
control paneleasy access filters
MODEL: HWR06XC6,ESA3056
2. MODE Set Switch
2-way
airflow
control paneleasy access filters
5. How The Unit Drains
MODEL: HWF06XC5
Remote control and control panel operations
MODEL: HWR06XC6,ESA3056
Every time you press the MODE button, it will change between FAN, COOL .
(See
fig.# 3)
Having set the temperature you will set the function of the air conditioner.
Once the function mode is decided you will have to set the fan speed.(See fig. #4)
Every time you press the SPEED button, fan speed will change between LOW, HIGH.
1) If you choose the COOL mode you can run the fan in one of the 2 speeds HIGH,
LOW.
2) For cool days you may want to run the "FAN" function. Here the fan runs at one
of 2 speeds, HIGH or LOW.
Fig. # 5
Fig. # 1
MODEL: HWF06XC5
Also when you shut off the air conditioner wait for 3 minutes
before turning it on again.
POWER Turns air conditioner off.
SPEED "LOW" Low speed fan operation with cooling or not.
SPEED "HI" High speed fan operation with cooling or not.
This automatically controls the temperature of indoor air. Turn the knob
so that arrow points to the cooler marks for more moderate cooling.
Normal Fan
1. Turn the SPEED mode switch to the "HI" or the "LOW" setting.
2. Set the thermostat control to the temperature mark "FAN ONLY".
Normal cooling
1. Turn the SPEED mode switch to the "HI" or the "LOW" setting.
2. Set the thermostat control to the desire temperature (the mid-point
is a good starting position).
If the room temperature is not satisfactory after a reasonable time, adjust
the control to a warmer setting, as appropriate.
Maximum cooling
1. Turn the SPEED mode switch to the "HI" setting
2. Set the thermostat control to the MAX COOL temperature mark.
Quieter operation
1. Turn the SPEED mode switch to the "LOW" setting.
2. Set the thermostat control as needed.
CAUTION:
1
2
3
ìCR2025ì battery
Remote
control
window seal gasket
short screws 13/32"
wood screws 31/32"
Model:HWF06XC5
window seal gasket
short screws 13/32"
wood screws 31/32"
Model:HWR06XC6,ESA3056
top rail
top rail
HWF06XC5,HWR06XC6,ESA3056
Insert the side curtains into the
top and bottom rails of the air
conditioner. Fasten the curtains
to the unit with 8 short screws
13/32".
Install top rail with 3 short
screws13/32".
ASSEMBLE
CURTAINS/TOP RAIL
12
3
5
13
3
8
38
22
12
7
16
18
9
16
14
11
16
5
3
25
INNER
SILL
OUTER
SILL
I
N
D
O
O
R
S
O
U
T
D
O
O
R
S
WOOD STRIP
MOUNTED ON
TOP OF INNER SILL
WOOD STRIP
FOR BASEPAN
ANGLE
STORM
WINDOW FRAME
I
N
D
O
O
R
S
O
U
T
D
O
O
R
S
INNER
SILL
OUTER
SILL
LOCATING UNIT IN
WINDOW
Open the window and mark center line on the
center of the inner sill.
CENTER LINE
INNER SILL
INDOOR SIDE
ATTACH BASEPAN
ANGLE
CENTER LINE
SHORT SCREW13/32"
INNER SILL
OUTER SILL
SHORT SIDE
BASEPAN ANGLE
OUTSIDE
INSIDE
Install the basepan angle behind the inner window sill, with
the short side of basepan angle as shown. Use the 2 short
screws13/32" provided.
The basepan angle helps to hold unit securely in place.
Be sure to place basepan angle edge flush against back
of inner sill.
2
INSTALL THE AIR CONDITIONER
IN THE WINDOW
Carefully lift the air conditioner and slide it into the open
window. Make sure the bottom guide of the air conditioner
drops into the notches of the basepan angle.
While steadying the air conditioner ,carefully bring the
window sash down behind the upper guide of the air
conditioner.
WINDOW FRAME
UPPER GUIDE
BOTTOM GUIDE
BASEPAN ANGLE
INSTALL THE SEAL GASKET
AND SASH LOCK
Extend the side curtains to fill the
window opening using 4 wood screws
31/32" to secure them.
Cut the seal gasket to the window
width. Stuff the sash seal between the
glass and the window to prevent air
and insects from getting into the room.
Fasten the basepan angle, using a
short screw13/32".
BASEPAN ANGLE
WINDOW SEAL GASKET
SHORT SCREW13/32"
WOOD SCREW31/32"
The air filter behind the front grille should be checked and
cleaned at least once every 2 weeks or more often if necessary.
To remove:
1. Open the inlet grille downward by pulling out the top of the inlet grille.
2. Remove the air filter from the front grille assembly by pulling the air filter
up slightly.
3. Clean the filter with warm, soapy water below 40
o
C(104
o
F).
4. Rinse and gently shake the water from the filter and let it dry before replacing
it.
Always use a soft cloth dampened with water or mild soap
and water solution to wipe the front of the cabinet.
To clean the front panels or the cabinet DO NOT use harsh
chemicals, abrasives, ammonia, chlorine, bleach, concentrated
detergents, solvents or metal scouring pads.
DO NOT use your air conditioner without the air filter in place.
Always unplug your air conditioner before cleaning.
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Haier HWR06XC6 User manual

Haier
Brand
Haier
Model
HWR06XC6
Type
User manual
This manual is also suitable for

Haier HWR06XC6 is a versatile air conditioner with a range of features to keep you comfortable. It has two-way airflow, easy-access filters, and a control panel for simple operation. You can choose between fan, cooling, and dehumidification modes, and set the fan speed to low or high. The unit also features a programmable timer, sleep mode, and automatic restart function. Maintenance is easy, with a washable air filter and a self-cleaning function.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents