Ideal Pet RFLO Installation guide

Ideal Pet Door

Replacement

Flap Kit

“Original” Plastic Pet Door Flap Installation:

1. On inside frame, unscrew bar that holds flap.

2. Re-attach bar to new flap and screw lightly back into frame.

3. Position so that flap hangs evenly in frame.

4. Carefully tighten screws. DO NOT OVERTIGHTEN.

PATENT PENDING MADE IN USA

MANUFACTURERS LINK# RFLO R-609

Ideal Pet Products

Valencia, CA 91355

This Flap Fits:

Large

9” x 15”

Flap Size

“Original”

Plastic

Pet Door

Model# RFLO

The Flap You Are Replacing

Should Have The Following:

#1: Holes In Top Of Flap

#2: Rectangular Ideal Logo

#3: Smooth Bottom Bar (No Rivets)

#1: Holes In Top Of Flap

#2: Rectangular Ideal Logo

#3: Smooth Bottom Bar (No Rivets)

Download PDF