GETTING STARTED
Creating Your Bag:
1. Measure item to be vacuum sealed and add 5 inches to bag
length to allow for proper Vacuum Sealing.
2. Seal one end to make the bag.
© 2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved.
Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
PN 159219
SPR-030812-140
When Ready to
VACUUM SEAL:
3. Fill bag with contents.
4. Neatly fold-in the side pleats of bag and pull tightly.
There should be NO WRINKLES.
5. Insert bag into machine and vacuum and seal as you normally would.
2˝1˝ 3˝ 4˝ 5˝
2˝1˝ 3˝ 4˝ 5˝
NOTE: FOR BEST RESULTS, READ MACHINE INSTRUCTION MANUAL BEFORE OPERATING.
FOR BEST RESULTS, USE “MOIST” SETTING OR SEAL TWICE.
date : 03.08.12
job # : 92-0212-141
client : JCS - FoodSaver
project : QSG
notes :
PMS
349
BLACK
8” w
5” h
-
1
