Delta Electronics Network Device KE User manual

Type
User manual

This manual is also suitable for

G3SA
G
L
N
40.0 0.5
1.575 0.020
3.3 (2X)
0.13 (2X)
2.051
52.1
-
28.450
-
1.120
+0.02
+0.5
R3.0(4X)
SUGGESTED MOUNTING CUTOUT
(MOUNTING FROM FRONT)
R0.118(4X)
M3(2X)
1.575 0.005
40.0 0.13
1.520
38.6
1.970 MAX.
50.0 MAX.
2.126 MAX.
54.0 MAX.
-
21.6 0
-
0.850 0
+0.02
+0.5
1.118 MAX.
28.4 MAX.
0.839 MAX.
21.3 MAX.
ELECTRICAL SCHEMATIC
SERIES
D
V
E
SPECIFICATIONS
1. Maximum leakage current each
line-to-ground @ 115VAC 60Hz: 0.20mA
@ 250VAC 50Hz: 0.40mA
2. Hipot rating (one minute)
line-to-ground: 2250VDC
line-to-line: 1450VDC
3. Operating frequency: 50/60Hz
4. Rated voltage: 115/250VAC
HIGH PERFORMANCE IEC CONNECTOR
FILTERS
2-11
1. Specially designed with ground choke providing most effective
EMI suppression for high frequency noise (ranged 5MHz-25MHz).
2. Bleeder resistor can be added with suffix "-R" on part numbers.
3. With optional 3300pF Y capacitor instead of 2200pF.
4. All part numbers are UL recongnized, CSA certified and VDE approved.
G3EA
W3EA
Cx
Lg
G
L
N
E
N
I
L
L
G'
Cy
Cy
N'
L'
D
A
O
L
R
R: 1M /-R ONLY
INTRODUCTIONS
MECHANICAL CONSTRUCTION
IEC INLET FILTERS
MINIMUM INSERTION LOSS IN dB
FREQUENCY-MHz
.15 .50 1.0 5.0 10 30
03KEEG3EA/03KEEW3EA 15 20 25 40 40 45
08KEEG3EA/08KEEW3EA 10 15 20 35 40 50
10KEEG3EA/10KEEW3EA 7 12 18 30 30 50
03KEEG3SA/03KEEW3SA 15 20 25 40 40 40
06KEEG3SA/06KEEW3SA 7 15 20 35 40 40
10KEEG3SA/10KEEW3SA 4 12 18 30 30 45
03KEEG3EA/03KEEW3EA 5 12 15 40 50 45
08KEEG3EA/08KEEW3EA 5 10 15 45 40 50
10KEEG3EA/10KEEW3EA 4 12 18 30 30 50
03KEEG3SA/03KEEW3SA 10 20 35 40 45 40
06KEEG3SA/06KEEW3SA 10 25 40 35 40 40
10KEEG3SA/10KEEW3SA 10 25 35 30 30 45
COMMON MODE (L-G) IN 50 OHM SYSTEM
DIFFERENTIAL MODE (L-L) IN 50 OHM SYSTEM
PART NO.
COMPONENTS
**
***
***
***
*
VDE approved to 6A 250V.
UL, CSA & VDE approved to 9A 115/250VAC.
SEMKO approved , UL& cUL under approve.
PART NO. L (mH) Cx (uF) Cy (pF) Lg (uH)
03KEEG3EA/03KEEW3EA 3.1
08KEEG3EA/08KEEW3EA 0.8
10KEEG3EA/10KEEW3EA 0.4 0.1 2200 100
03KEEG3SA/03KEEW3SA 3.1
06KEEG3SA/06KEEW3SA 0.8
10KEEG3SA/10KEEW3SA 0.4
**
***
*
UNIT:
INCH
mm
G3EA
G
L
N
0.84MAX.
21.3MAX.
28.4MAX.
1.12MAX.
40.01 0.5
1.575 0.02
30.0 0.5
1.79
2.34
59.5
45.5
1.18 0.02
3.3 0.2
0.13 0.008
0.87 0.02
22.2 0.5
2.16 0.04
55.5 1.0
1.99MAX.
50.5MAX.
SUGGESTED MOUNTING CUTOUT
-
28.450
-
1.120
+0.02
+0.5
-
R3.03.0
-
R0.120.12
+0
+0
M3
1.575 0.005
40.0 0.13
-
28.45 0
-
1.12 0
+0.02
+0.5
51.5
2.02
1.0
0.04
1.87
0.04
47.5
1.0
L
0.2
0.008
0.84MAX.
G
N
21.3MAX.
W3EA
1.12MAX.
28.4MAX.
4.0MIN.
100.0MIN.
30.0 0.5
1.575 0.02
40.0 0.5
1.18 0.02
1.99MAX.
50.5MAX.
22.2 0.5
0.87 0.02
ALL WIRE LEADS 4.0" LONG MIN.
SUGGESTED MOUNTING CUTOUT
-
28.450
-
1.120
+0.02
+0.5
-
R3.03. 0
-
R0.120.1 2
+0
+0
M3
1.575 0.005
40.0 0.13
-
28.45 0
-
1.12 0
+0.02
+0.5
0.13
3.3
  • Page 1 1

Delta Electronics Network Device KE User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI