Lenovo Bluetooth Keyboard Cover for TAB A10 User manual

Brand: Lenovo

Model: Bluetooth Keyboard Cover for TAB A10

Type: User manual

Bluetooth Keyboard Cover for TAB A10

* For reference only, please refer to our actual product.

Printed in China

Learn more

Legal notices

First Edition (March 2014)

For more information about tablet functions and useful manuals, go to

http://support.lenovo.com/.

To read this manual on your tablet, please access “User

Guide” from the Browser favorites in your tablet.

Getting support

For support on network service and billing, please contact your wireless network operator.

For instructions on how to use your tablet, go to

http://support.lenovo.com/

Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other countries,

or both.

Other company, product, or service names may be trademarks or service marks of others.

252-01401L-A01US

Special function keys

Lock screen

Open web browser

Mute

Turn volume down

Turn volume up

Play/Pause

Display home screen

Application & Access

Display input selection

screen

Calculated by 2 hours in normal daily use.

Using sym to switch input methods: Press sym key on the keyboard and then

select the required input method from the popup Choose input method screen.

Save screen image

Specications

Bluetooth version

Battery capacity

Charging voltage

Battery life

Charging current 100 mA

Wireless range

On-screen display (OSD)

Volume

Media controls

prtsc

sym

3.0

10 m

90 days

220 mAh

5 V

The Bluetooth Keyboard Cover can be used to control a tablet with combination

keys in orange legend color (for details, see special function keys) . The keyboard

and the tablet can be combined for easy carrying.

It takes approximately three hours to fully charge the Bluetooth Keyboard Cover for the rst

time, or after the battery has been fully depleted. To charge the Bluetooth Keyboard Cover,

connect the USB end of the charging cable to the USB port on a computer or on the

charger, and correctly attach the other end of the charging cable to the charging port. When

the status indicator glows constant red, this indicates that the Bluetooth Keyboard Cover is

charging. Use the dedicated USB charging cable or else the Bluetooth Keyboard Cover might

become damaged.

Charging the Bluetooth Keyboard Cover

Introduction*

Charging port

Pairing switch

Power switch

Status indicator

Connecting to a tablet

First time pairing

While using this keyboard rst time, please set the power switch to "on" position. The

keyboard will enter into pairing status to pair with the tablet.

Pairing with other tablets

While pairing with other tables, please set pairing switch to Bluetooth logo position

for more than 1 second to enter into pairing mode for pairing with other tablets.

Combining with a tablet

To pack it up, carefully place the tablet screen down onto the Bluetooth Keyboard Cover

and gently push the edge of the tablet until it slides into the Bluetooth Keyboard Cover.

When using the tablet, slide it out in the opposite direction.

Status indicator

Flashing red The battery capacity is insufcient.

Constant red

The Bluetooth Keyboard Cover is charging. When

charging is complete, the indicator turns off.

Flashing blue slowly

Attempting to connect to last connected d e v i c e . I f i t

connects successfully, the indicator turns off after on for

two seconds.

Flashing blue

quickly

The keyboard is in the pairing state and can be discovered by

other devices. If the pairing is successful, the indicator turns

off after on for two seconds.

Connecting to a tablet

Before using the Bluetooth Keyboard Cover for the rst time, connect it to the tablet.

If the Bluetooth Keyboard Cover has successfully connected to the tablet in the past, it

will automatically connect to the tablet via Bluetooth after turned on. If the connection

fails, check the tablet to see if Bluetooth is set to ON and then reconnect using the

previous four steps.

Step1: Turn the keyboard's power switch on.

The status indicator on the keyboard will ash quickly, and the keyboard can be

discovered by other devices.

Step 2: On the tablet, choose Settings > Bluetooth and set Bluetooth to “On” .

Step 3: A prompt indicating that the keyboard is SEARCHING is displayed in the upper

right corner of the tablet screen. If no prompt is displayed, select SEARCH FOR

DEVICE in the upper right corner of the tablet screen.

Step 4: Select Lenovo BKC510 from the list of available devices on the tablet screen.

When the prompt indicating that the Lenovo BKC510 has been connected is

displayed, it means that the keyboard has successfully connected to the tablet.

Selecting the Preferred Language

After paring with the tablet, please follow up below steps and the image to select your

preferred language.

1. Scroll down the notication bar and choose the keyboard layout as the red circle 1 in the image.

2. Eject the language & input setting as the red circle 2 in the image. Choose physical

keyboard > hid-keyboard > setup keyboard layouts

3. Check the layout you want to use as the red circle 3 in the image.

4. If multi-language layouts selected, user can use "ctrl+space" to switch the layout.

Lenovo Bluetooth Keyboard Cover for TAB A10 User manual

Lenovo Bluetooth Keyboard Cover for TAB A10 User manual

Lenovo Bluetooth Keyboard Cover for TAB A10 User manual

Related papers

Other documents