01
Modem Cradle Quick Guide
Copyright© 2007 CipherLab Co., Ltd. All rights reserved. Version 1.02
In addition to charging the terminal, the Modem Cradle is specifically designed for the portable terminal to
communicate with a remote device via the modem. Inside the package, you will find
To establish a connection, follow these steps –
1. Place the cradle on a flat and clean surface.
2. Connect the power adaptor to the power jack on the back of the cradle. Also, connect
the power supply cord to the power adaptor and a proper power outlet.
3. Seat the terminal in the cradle for charging.
4. For data communications with a remote device, connect the telephone line to the line
jack. You may use the phone cord to connect between a telephone and the cradle via
the phone jack.
5. To prevent from power surge, you may purchase a surge protector separately.
Connect the surge protector between the line jack and the phone line.
• the Modem Cradle
• the power adaptor and power supply cord
• one RS-232 cable for connecting to a computer directly
• one phone cord for connecting to a telephone
02
8001/8300 Modem Cradle Overview
Indicators
MR Solid red
Off
: Power ON
: Power OFF
Flashing red
Off
: Transmitting data to the remote device
: No activity
: Receiving data from the remote device
: No activity
Ports Serial
Modem
: RS-232 port
: Line jack (RJ-11)
TD
Flashing red
Off
RD
Communications
Transmission Rate Default to 57,600 bps
Up to 115,200 bps via the onboard DIP switch
8001 Modem Cradle
8300 Modem Cradle
03
8500 Modem Cradle Overview
Indicators
Power Solid red
Solid green
Off
: Power ON for Modem Connection
: Power ON for RS-232 Connection
: Power OFF
Solid red
Off
: Transmitting data to the remote device
: No activity
: Receiving data from the remote device
: No activity
Charging Spare
Battery
Solid red
Solid green
Flashing
Off
: Charging
: Charging Done
: Error occurs
: Battery not ready
Ports Serial
Modem
: RS-232 port
: Line jack (RJ-11)
TX
Solid red
Off
RX
Communications
Transmission Rate Default to 57,600 bps
Up to 115,200 bps via the onboard DIP switch
04
Specifications
Please visit our website www.cipherlab.com for more product information.
General
8001 8300 8500
Power Adaptor 5V DC 5V DC 6V DC
Charging Current 500 mA 500 mA 1.5 A
CPU 16-bit CMOS, low power consumption
Memory Firmware upgradeable
Programming Terminal programming, cradle commands
Physical
Enclosure Material ABS Plastic
Dimensions 110 mm (L)
100 mm (W)
60 mm (H)
110 mm (L)
100 mm (W)
78 mm (H)
190 mm (L)
125 mm (W)
124 mm (H)
Weight (approx.) 215 g 225 g 725 g
Environmental
Humidity
Operating: 0°C ~ 50°C
Storage: -20°C ~ 70°C
Temperature
Operating: 5% ~ 90%
Storage: 5% ~ 95%
Certification
FCC, CE, IC, MIC, A-Tick, Taiwan, Japan
/
