Contec DIO-1616E-LPE Reference guide

Brand: Contec

Model: DIO-1616E-LPE

Type: Reference guide

This manual is also suitable for

DIO-1616E-LPE NEW

Reference Manual

CONTENTS

PC-HELPER Series

Digital I/O Board with Opto-Isolation (Wide Range) for Low Profile PCI Express

DIO-1616E-LPE

Introduction .................................................................. 4

Safety Precautions .................................................... 11

Setup ............................................................................. 17

Installation ................................................................... 30

Software ....................................................................... 36

Function ....................................................................... 43

Appendix ...................................................................... 47

Customer Support and Inquiry ............................ 52

— 2 —

Table of Contents

Introduction ...................................................................... 4

1. Related Manuals ......................................................................................................................................................5

2. About the Product ..................................................................................................................................................6

3. Features ......................................................................................................................................................................7

4. Product Configuration List ..................................................................................................................................8

5. Support Software ....................................................................................................................................................9

6. Optional Products................................................................................................................................................ 10

Safety Precautions ......................................................... 11

1. Safety Information ............................................................................................................................................... 12

2. Handling Precautions ......................................................................................................................................... 13

1. EN55032Class A Notice .............................................................................................................................. 14

3. Environment ........................................................................................................................................................... 15

4. Inspection ............................................................................................................................................................... 15

5. Storage ..................................................................................................................................................................... 15

6. Disposal ................................................................................................................................................................... 16

Setup ............................................................................... 17

1. What is Setup? ...................................................................................................................................................... 18

1. Driver Software Installation ....................................................................................................................... 18

2. Driver Software Installation ............................................................................................................................. 19

1. Starting Up the Install Program ............................................................................................................... 19

3. Hardware Setting ................................................................................................................................................. 20

1. Nomenclature of Product Components ............................................................................................... 20

2. Board ID Setting Switch .............................................................................................................................. 20

3. Replacing the Bracket .................................................................................................................................. 21

4. Hardware installation ......................................................................................................................................... 22

1. Plugging the Board ...................................................................................................................................... 22

2. Turning on the PC ......................................................................................................................................... 23

5. Driver Software Initialization ........................................................................................................................... 24

1. Setting the device name ............................................................................................................................ 24

6. Operation Check .................................................................................................................................................. 26

1. Check Method ................................................................................................................................................ 26

2. Using the Diagnosis Program .................................................................................................................. 26

7. Setup Troubleshooting ...................................................................................................................................... 29

1. Examples and Solution ................................................................................................................................ 29

Installation ...................................................................... 30

1. Connecting to an External Device ................................................................................................................. 31

1. Connecting an Interface Connector....................................................................................................... 31

2. Signal Layout on the Interface Connector .......................................................................................... 32

— 3 —

Table of Contents

2. Connecting Input And Output Signals ........................................................................................................ 34

1. Input Circuit ..................................................................................................................................................... 34

2. Output Circuit ................................................................................................................................................. 35

Software.......................................................................... 36

1. Digital I/O Driver for Windows ....................................................................................................................... 37

1. Accessing the Help File ............................................................................................................................... 37

2. Using Sample Programs ............................................................................................................................. 37

3. Running a Sample Program ...................................................................................................................... 38

4. Distributing Developed Application ...................................................................................................... 39

5. Use of Utility Program ................................................................................................................................. 39

6. Uninstalling the Driver Software ............................................................................................................. 40

2. Digital I/O Driver for Linux ............................................................................................................................... 41

1. Driver Software Install Procedure ........................................................................................................... 41

2. Accessing the Help File ............................................................................................................................... 42

3. Using Sample Programs ............................................................................................................................. 42

4. Uninstalling the driver ................................................................................................................................. 42

Function .......................................................................... 43

1. Data I/O Function ................................................................................................................................................ 44

2. Digital Filter ............................................................................................................................................................ 45

3. Interrupt Control Function ............................................................................................................................... 46

Appendix ........................................................................ 47

1. Hardware Specification ..................................................................................................................................... 48

2. Physical Dimensions ........................................................................................................................................... 50

3. Circuit Block Diagram......................................................................................................................................... 51

Customer Support and Inquiry ..................................... 52

1. Services .................................................................................................................................................................... 53

— 4 —

Introduction

This section provides necessary information of the product

such as the outline, bundled items and manuals before

actual use.

—

Introduction

—

DIO-1616E-LPE Reference Manual

— 5 —

1. Related Manuals

The manuals related to the product are listed below.

Read them as necessary along with this document.

 Must Read the Followings.

Name

Purpose

Contents

How to get

Setup Guide

Must read this after

opening the package.

This lists the product

configuration and describes

the precautions.

Included in the package

(Printed matter)

Reference Manual

(This Document)

Read this when

operating the product.

This describes the hardware

aspects such as functions

and settings.

Download from

the Contec

website (PDF)

 Download Manuals

Download the manuals accordingly from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

DIO-1616E-LPE Reference Manual

— 6 —

2. About the Product

This product is a PCI Express bus-compliant interface board that extends the digital signal I/O

functions of a PC.

This product has opto-coupler isolated input 16ch and opto-coupler isolated open-collector output

16ch and can input and output a wide range signals (5 - 36VDC).

You can use all of the input signals as interrupt inputs.

Equipped with the digital filter function and protection circuit (surge voltage protection and

overcurrent protection).

This product supports a Low Profile size slot and if replaced with the supplied bracket, supports a

standard size slot, too.

Windows/Linux driver is supported with this product.

Using the dedicated library DAQfast makes it possible to create each application for LabVIEW.

—

Introduction

—

DIO-1616E-LPE Reference Manual

— 7 —

3. Features

 Opto-coupler isolated input (supporting current sink

output) and opto-coupler isolated open-collector

output (current sink type)

This product has the opto-coupler isolated input 16ch (supporting current sink output) whose response speed is 60 µsec and opto-

coupler isolated open-collector output 16ch (current sink type) whose response speed is 60 µsec.

Supporting driver voltages of 5 - 36 VDC for I/O

 Opto-coupler bus isolation

As the PCI Express bus (PC) is isolated from the input and output interfaces by opto-couplers, this product has excellent noise

performance.

 All input signals can be used as interrupt inputs

You can use all of the input signals as interrupt request signals and also disable or enable the interrupt in bit units and select the edge

of the input signals, at which to generate an interrupt.

 Windows/Linux compatible driver libraries

Using the driver library API-PAC(W32) makes it possible to create applications of Windows/Linux. In addition, a diagnostic program by

which the operations of hardware can be checked is provided.

 Equipped with digital filter to prevent wrong

recognition of input signals from carrying noise or a

chattering

This product has a digital filter to prevent wrong recognition of input signals from carrying noise or a chattering. All input terminals can

be added a digital filter, and the setting can be performed by software.

 Equipped with the zener diode for surge voltage

protection and with the overcurrent protection circuit

Zener diodes are connected to the input and output circuits to protect against surge voltages. In addition, the output circuit, it attaches

the overcurrent protection circuit at the output 8-channel unit.

 LabVIEW-support data acquisition library DAQfast for

LabVIEW

DAQfast is a data collection library with Polymorphic VI to operate seamlessly for use in the LabVIEW by National Instruments.

—

Introduction

—

DIO-1616E-LPE Reference Manual

— 8 —

4. Product Configuration List

The product consists of the items listed below.

Check, with the following list, that your package is complete.

If you discover damaged or missing items, contact your retailer.

Product…1

Setup Guide…1

Warranty Certificate…1

Serial Number Label…1

Standard size bracket…1

—

Introduction

—

DIO-1616E-LPE Reference Manual

— 9 —

5. Support Software

You can use CONTEC support software according to your purpose and development environment.

For more details on the supported OS, applicable languages, or to download the latest version of

software, visit the CONTEC Web site.

Name

Contents

How to get

Windows Version

Digital I/O Driver software

API-DIO(WDM)

The API-DIO(WDM) is the Windows version driver

software that provides products in the form of

Win32 API functions (DLL). Various sample

programs such as Visual Basic and Visual C++, etc

and diagnostic program useful for checking

operation is provided.

Download from the

CONTEC website

Linux Version

Digital I/O Driver software

API-DIO(LNX)

The API-DIO(LNX) is the Linux version driver software

which provides device drivers (modules) by shared

library and kernel version. Various sample programs

of gcc are provided.

Download from the

CONTEC website

LabVIEW-support data

acquisition library

DAQfast for LabVIEW

This is a data collection library to use in the LabVIEW

by National Instruments. With Polymorphic VI, our

design enables a LabVIEW user to operate

seamlessly. Our aim is that the customers to perform

easily, promptly what they wish to do.

Download from the

CONTEC website

Download the files from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

DIO-1616E-LPE Reference Manual

— 10 —

6. Optional Products

Optional product items are as follows:

Use these items with the main product as necessary.

Product Name

Model type

Description

Shield Cable with Two 50-Pin Mini-Ribbon Connector

PCB50PS-0.5P

0.5m

PCB50PS-1.5P

1.5m

PCB50PS-3P

Shield Cable with One 50-Pin Mini-Ribbon Connector

PCA50PS-0.5P

0.5m

PCA50PS-1.5P

1.5m

PCA50PS-3P

Connection Conversion 0.5m Shield Cable

(50-Pin Ribbon->37-Pin D-SUB)

PCE50/37PS-0.5P

0.5m

Screw Terminal Unit (M3 terminal block, 50 points)

EPD-50A

*1 *2

Screw Terminal Unit (M3 terminal block, 37 points)

EPD-37A

*1 *3

Screw Terminal Unit (M3.5 terminal block, 37 points)

EPD-37

Termination Panel (M3)

DTP-3C

Termination Panel

DTP-4C

Signal Monitor for Digital I/O

CM-32L

*1 "Spring-up" type terminal is used to prevent terminal screws from falling off.

*2 PCB50PS-*P optional cable is required separately.

*3 PCE50/37PS-0.5P and PCB37P or PCB37PS optional cable is required separately.

Visit the CONTEC website for the latest optional products.

Website

https://www.contec.com/

— 11 —

Safety Precautions

Understand the following definitions and precautions to

use the product safely.

Never fail to read them before using the product.

—

Safety Precautions

—

DIO-1616E-LPE Reference Manual

— 12 —

1. Safety Information

This document provides safety information using the following symbols to prevent accidents

resulting in injury or death and the destruction of equipment and resources.

Understand the meanings of these labels to operate the equipment safely.

DANGER

Signal word used to indicate an imminently hazardous situation which,

if not avoided, will result in death or serious injury.

WARNING

Signal word used to indicate a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

CAUTION

Signal word used to indicate a potentially hazardous situation which, if

not avoided, could result in minor or moderate injury.

—

Safety Precautions

—

DIO-1616E-LPE Reference Manual

— 13 —

2. Handling Precautions

DANGER

 Do not use the product in locations exposed to a flammable or corrosive gas. It may cause

explosion, fire, electrical shock, or malfunction.

CAUTION

 There are switches and jumpers on this product that need to be set in advance.

Be sure to check these before installing this product.

 Only set the switches and jumpers on this product to the specified settings.

Otherwise, this product may malfunction, overheat, or cause a failure.

 Do not strike or bend this product.

Otherwise, this product may malfunction, overheat, cause a failure or breakage.

 Do not touch this product's metal plated terminals (edge connector) with your hands.

Otherwise, this product may malfunction, overheat, or cause a failure.

If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.

 As this product contains components that are designed to operate at high temperature,

please do not touch this product when it is in use.

 Do not install this product to the expansion slot and do not plug or unplug the cables which

are connected to this product while the PC or expansion unit is still turned on.

Otherwise, this product may malfunction, overheat, or cause a failure.

Be sure that the personal computer power is turned off.

 Do not touch the external connector when the power is on.

Otherwise this may malfunction, cause a failure due to static electricity.

 Make sure that your PC or expansion unit can supply ample power to all the products installed.

Insufficiently energized products could malfunction, overheat, or cause a failure.

 The specifications of this product are subject to change without notice for enhancement and

quality improvement. Even when using the product continuously, be sure to read the manual

and understand the contents.

 Do not modify the product. CONTEC will bear no responsibility for any problems, etc.,

resulting from modifying this product.

 Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever

(Including damages for loss of business profits) arising out of the use or inability to use this

CONTEC product or the information contained herein.

 Regarding “CE EMC Directive Notice”.

Please connect the Interface Connector with a shielded cable to meet the mentioned standard

above.

—

Safety Precautions

—

DIO-1616E-LPE Reference Manual

— 14 —

1. EN55032Class A Notice

Warning:

Operation of this equipment in a residential environment could cause radio interference.

—

Safety Precautions

—

DIO-1616E-LPE Reference Manual

— 15 —

3. Environment

Use this product in the following environment. If used in an unauthorized environment, this product may overheat,

malfunction, or cause a failure.

Operating temperature

0 - 50ºC

Humidity

10 - 90%RH (No condensation)

Corrosive gases

None

Floating dust particles

Not to be excessive

4. Inspection

Inspect the product periodically as follows to use it safely.

5. Storage

When storing this product, keep it in its original packing form.

 Put this product in the storage bag.

 Wrap it in the packing material, and then put it in the box.

 Store the package at room temperature at a place free from direct sunlight, moisture, shock,

vibration, magnetism, and static electricity.

—

Safety Precautions

—

DIO-1616E-LPE Reference Manual

— 16 —

6. Disposal

When disposing of the product, follow the disposal procedures stipulated under the relevant laws

and municipal ordinances.

— 17 —

Setup

This section explains how to set up this product.

—

Setup

—

DIO-1616E-LPE Reference Manual

— 18 —

1. What is Setup?

Setup means a series of steps to take before the product can be used.

Different steps are required for driver software and hardware.

The setup procedure varies with the OS or driver software used.

1. Driver Software Installation

This section describes the procedure to start the application program development using the driver

software API-DIO(WDM).

Taking the following steps sets up the driver software and hardware. You can use the diagnosis

program later on to check whether the driver software and hardware function properly.

Step 1 Driver Software Installation (page19)

Step 2 Hardware Setting (page20)

Step 3 Hardware Installation (page20)

Step 4 Driver Software Initialization (page24)

Step 5 Operation Check (page26)

If Setup fails to be performed properly, see the “Setup Troubleshooting (page29)” section at the

end of this chapter.

—

Setup

—

DIO-1616E-LPE Reference Manual

— 19 —

2. Driver Software Installation

This section describes how to install the driver software.

Before connecting this product to a PC, install the device driver.

Although some user interfaces are different depending on the OS used, the basic procedure is the

same. For detailed OS installation procedure, refer to Help (APITOOL.chm) in the folder that installed

the development environment package from CONTEC website.

1. Starting Up the Install Program

1 Download the API-DIO(WDM) from CONTEC website.

2 Expand the downloaded file.

3 Execute the installer in the expanded folder. As the installer differs depending on OS used,

check the list below to execute.

Other than Windows 10 :

(Expanded folder)\INF\WDM\Dio\Setup.exe

Windows 10 :

(Expanded folder)\INF\WDM\Dio_forWin10\Setup.exe

—

Setup

—

DIO-1616E-LPE Reference Manual

— 20 —

3. Hardware Setting

This section describes how to set up the product and how to connect it to a PC.

1. Nomenclature of Product Components

Component names of the product are shown in the figure below.

No.

Name

Interface Connector

Setting Switches

2. Board ID Setting Switch

If you install two or more boards on one personal computer, assign a different ID value to each of

the boards to distinguish them. Set a different value per board.

The board IDs can be set from 0 - Fh to identify up to sixteen boards. If only one board is used, the

original factory setting (Board ID = 0) should be used.

Page is loading ...

Contec DIO-1616E-LPE Reference guide

Brand: Contec

Model: DIO-1616E-LPE

Type: Reference guide

This manual is also suitable for

DIO-1616E-LPE NEW

Download PDF

report

Contec DIO-1616E-LPE Reference guide

This manual is also suitable for

Contec DIO-1616E-LPE Reference guide

Related papers

Other documents