User’s Manual
Kinesis
®
Advantage™ Foot Pedals
Advantage Single Pedal: FS007RJ11
Advantage Triple Pedal: FS007TAF
Overview
Advantage foot pedals are designed to act as an extension of your Kinesis contoured keyboard. Advantage foot pedals are not
stand-alone devices, they must be connected to a Kinesis Advantage contoured keyboard. Once connected, an Advantage foot
pedal can be programmed as if it were another key on the keyboard.
Compatibility
Advantage foot pedals are plug-and-play with all Advantage and Advantage2 model keyboards.
Installation
Plug the foot pedal into the telephone-style (RJ11) connector at the back of the keyboard.
Warning: Do not connect the pedal a telephone line or other device as it could present a fire hazard.
Default Actions
The default action each pedal depends on the keyboard it is connected to. The most popular action is “Keypad Shift”: Press and
hold the pedal to temporarily shift the keyboard to the Keypad Layer to access embedded key actions like the numeric keypad.
Programming Custom Actions
Regardless of which model Advantage keyboard you are using, the Foot Pedal is programmed as if it were another key on the
keyboard. Use onboard remapping to assign an existing key action to the pedal or use pedals to trigger a macro. If you are
using an Advantage2 keyboard, you can use the SmartSet App or Direct Programming to assign special actions to the pedal.
Each pedal can be programmed to perform two unique actions: one in the Top Layer and one in the Keypad Layer.
Anchoring the Single Pedal
Single pedal users may find it useful anchored attach the included self-adhesive hook & loop square to keep the pedal in one
spot. If you are working on carpet, just use the “hook” side attached to the bottom of the foot switch.
Support
Find support resources on the Advantage and Advantage2 pages respectively:
kinesis.com/support/#support-for-my-device
For further support, please submit a ticket at:
kinesis.com/support/contact-a-technician.
Version May 17, 2019
KINESIS CORPORATION
22030 20th Avenue SE, Suite 102
Bothell, Washington 98021 USA
© 2019 by Kinesis Corporation, all rights reserved. Printed in the USA on recycled paper. KINESIS is a registered trade-
mark of Kinesis Corporation. ADVANTAGE2, CONTOURED KEYBOARD are trademarks of Kinesis Corporation.
Fig. 1- Single Pedal Default
for all Advantage keyboards
Fig. 1- Triple Pedal Default Acons
for Advantage2
Fig. 1- Triple Pedal Default Acons
for Advantage