Kenmore Elite 59672284200 Owner's manual

i=" E:

®

Bottom-Freezer Refrigerator

Use & Care Guide

Refrigerador con montaje inferior

Manual de usoy cuidado

R_frig_rateur a compartiment inf_rieur

Guide d'utilisation et d'entretien

m

Z

O

m

W

596.72282200,596.72283200,596.72284200,596.72289200

\

I

_,,

Za

0

"11

m

_,,

Z

12642712

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com

Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8 Au Canada, www.sears.ca

l_Recognize this symbol as a safety alert indicator.

WARNING

Toavoid electrical shock which can cause severe personal injury or death, do not cut or remove the round

grounding prong from the plug. Refrigerator must be grounded at all times. Do not remove warning tag from cord.

Do not use a two-prong adaptor. Do not use an extension cord.

Electrical Grounding Instructions-This refrigerator is equipped with a three-prong (grounding) plug for protection

against possible shock hazards. If you encounter a two-prong receptacle, contact a qualified electrician and have

the two-prong wall receptacle replaced with a properly grounded three-prong wall receptacle in accordance with the

National Electrical Code. Refrigerator is designed to operate on a separate 103 to 126 volt, 15 amp., 60 cycle line.

DANGER

IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned

refrigerators are still dangerousieven if they will sit for "just afew days". If you discard an old refrigerator,

please follow the instructions below to help prevent accidents.

BEFORE YOU THROWAWAYYOUR OLD REFRIGERATOR OR FREEZER:

• Take off the doors.

• Leave the shelves in place so children may not easily climb inside.

We Service What We Sell

Your purchase has added value because you can depend on Sears HomeCentral ®for service. With over 12,000 trained repair

specialists and access to over 4.2 million parts and accessories, we have the tools, parts, and knowledge and skills to ensure

our pledge: We Service What We Sell.

Sears Maintenance Agreements

Your Kenmore appliance is designed, manufactured and tested to provide years of dependable operation. Yet any major

appliance may require service from time to time. The Sears Maintenance Agreement offers you an outstanding service

program, affordably priced.

The Sears Maintenance Agreement

Is your way to buy tomorrow's service at today's price.

Eliminates repair bills resulting from normal wear and tear. Some limitations apply. For more information,

Provides for nontechnical and instructional assistance, call 1-800-361-6655.

Even if you don't need repairs, provides an annual Preventative

Maintenance Check, at your request, to ensure that your appliance

is in proper running condition.

For information concerning Sears Canada

Maintenance Agreements, call 1-800-361-6665.

Full One Year Warranty on Refrigerator

For one year from the date of purchase, when this refrigerator is operated and maintained according to instructions attached

to or furnished with it, Sears will repair it, free of charge, if defective in material or workmanship.

Full Five Year Warranty on Sealed Refrigeration System

For five years from the date of purchase, when this refrigerator is operated and maintained according to instructions attached

to or furnished with it, Sears will repair the sealed system (consisting of refrigerator, connecting tubing and compressor

motor) free of charge, if defective in material or workmanship.

The above warranty coverage applies only to refrigerators which are used for storage of food for private household purposes.

It excludes original and replacement Kenmore ice & water filter cartridges (if equipped with the filter system). Original and

replacement cartridges are warranted for 30 days, parts only, against defects of material or workmanship.

Warranty service is available by contacting 1-800-4-MY-HOME (1-800-469-4663).

This warranty applies only while this product is in use in the United States.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179

Full One Year Warranty on Refrigerator

For one year from the date of purchase, when this refrigerator is operated and maintained according to instructions attached

to or furnished with it, Sears will repair it, free of charge, if defective in material or workmanship.

Full Five Year Warranty on Sealed Refrigeration System

For five years from the date of purchase, when this refrigerator is operated and maintained according to instructions attached

to or furnished with it, Sears will repair the sealed system (consisting of refrigerant, evaporator, and condenser) free of

charge, if defective in material or workmanship.

Ten Year Parts Warranty on Compressor

For ten years from the date of purchase, when this refrigerator is operated and maintained according to instructions attached

to or furnished with it, Sears will replace any compressor part, if defective in material or workmanship.

The above warranty coverage applies only to refrigerators which are used for storage of food for private household purposes.

It excludes original and replacement Kenmore filtered ice & water filter cartridges (if equipped with the filter system). Original

and replacement cartridges are warranted for 30 days, parts only, against defects of material or workmanship.

Warranty service is available by contacting 1-8O0-4-MY-HOME or (1-800-469-4663).

Sears Canada, Inc., Toronto, Canada, M5B 2B8

m

In the space below record the model and serial numbers and

3urchase date of your refrigerator. You will find the model and

serial number sticker inside the unit on the left wall of

refrigerator section.

Model Number: 596.

Serial Number:

Purchase Date:

Keep this booklet and your Sears sales receipt in a

safe place for future reference.

Recognize Safety Symbols, Words, Labels

DANGER I

DANGER--Immediate hazards which WILL result in severe personal injury or

death.

[ WARNING I

WARNING--Hazards or unsafe practiceswhich COULD resultin severe personal

injuryor death.

[ CAUTION I

CAUTION--Hazards or unsafe practiceswhich COULD resultin minor personal

injuryor product or property damage.

What You Need to Know

about Safety Instructions

Warning and Important Safety

Instructions appearing in this manual are

not meant to cover all possible

conditions and situations that may occur.

Common sense, caution, and care must

be exercised when installing,

maintaining, or operating refrigerator.

Always contact your dealer, distributor,

service agent, or manufacturer about

problems or conditions you do not

understand.

ElectricalRequirements...........................................2

MaintenanceAgreement...........................................2

Warranty....................................................................2

Warranty-Canada....................................................3

ProductRecord.........................................................3

ImportantSafetyInformation....................................3

InstallingYourRefrigerator.......................................5

HowtoTransportYourUnit..................................5

HowtoSelecttheBestLocation..........................5

HowtoRemovetheDoorsandHinges...............5

HowtoReverseRefrigeratorDoor.......................6

HowtoReplacetheDoorsandHinges...............6

HowtoRemoveandInstallthePulloutDrawer...7

HowtoConnecttheWaterSupply........................8

HowtoLevelYourRefrigerator.............................9

HowtoAdjusttheTemperatureControls.............9

AboutYourWaterFilter.......................................10

RefrigeratorFeatures..............................................11

PrimaryFeatures.................................................11

InteriorShelves....................................................11

DoorStorage........................................................11

Accessories.........................................................11

Climate-ControlledDrawers..............................12

FreezerFeatures....................................................13

PrimaryFeatures................................................13

Drawers..............................................................13

HintsandCare.......................................................14

HowtoCleanYourUnit......................................14

HowtoRemoveandReplaceLightBulbs.........15

Troubleshooting.....................................................16

WaterFilterData.....................................................19

Service......................................................BackCover

4

Installing Your Refrigerator

These instructions were provided to aid you in the installation of your unit. Sears cannot be responsible for improper installation.

How to Transport Your Unit

Follow these tips when moving the unit to final location:

NEVER transport unit on its side. If an upright position is not possible, lay unit on its

back. Allow unit to sit upright for approximately 30 minutes prior to plugging unit in

to assure oil return to the compressor. Plugging unit in immediately may cause

damage to internal parts.

Use an appliance dolly when moving unit. ALWAYS truck unit from its side-NEVER

from its front or back.

Protect outside finish of unit during transport by wrapping cabinet in blankets or

inserting padding between the unit and dolly.

Secure unit to dolly firmly with straps. Thread straps through handles when

possible. DO NOT overtighten. Overtightening restraints may dent or damage outside

finish.

How to Select the Best Location

Observe these points when choosing the final location for your unit:

DO NOT install refrigerator near oven, radiator, or other heat source. If not possible,

shield unit with cabinet material.

DO NOT install where temperature falls below 55°F (13°C). Malfunction may occur at

this temperature.

Make sure floor is level. If floor is not level, shim rear wheels of unit with a piece of

plywood or other shim material.

To assure proper door closure, verify that the unit is leveled with a 1/4" tilt to the back.

How do I measure

an opening to

insure proper fit?

A 1/2"of air space should be provided

for the top and back of the unit to allow

for proper air circulation. When

installing your unit, measure carefully.

Subflooring or floor coverings (i.e.

carpet, tile, wood floors, rugs) may IIIIII

make your opening smaller than

anticipated.

Some clearance may be gained by

using the leveling procedure under p

"How to Level Your Refrigerator". II

OI

IMPORTANT: If unit is to be installed

into a recess where top of unit is

completely covered, use dimensions

from floor to top of hinge cap to verify

proper clearance.

How to Remove the Doors and Hinges

Some installations require door removal to get refrigerator to final location. If removal of the pullout drawer is required, see

later section entitled How to Remove and Install the Pullout Drawer

WARNING

To avoid electrical shock which can cause severe personal injury or death, observe the following:

• Disconnect power to refrigerator before removing doors. Connect power only after replacing doors.

CAUTION

To avoid damage to walls and flooring, protect soft vinyl or other flooring with cardboard, rugs, or other protective material.

1 Unplug power cord from power source. )

2Remove toe grille and _ ]

bottom bracket cover(s).__ L I

• Open freezer door as wide as possible. '_/J

3 Rem°ve t°p hinge c°ver by _ ]

removing Phillips screw.

• Retain screw and cover for replacement. _)

r_ Unscrew 5/1(,"hex head screws _ ."

-I from top binge to remove hinge._L't_

L . Retain all screws for later use.

5Lift refrigeratordoor from _) _ ]

center binge pin, and remove .//_._ I

in with 'A6"hex nut driveJ _ l

• Retain hinge pin for later use. J f '_

Installing Your Refrigerator

How to Reverse Refrigerator Door

1 Perform all steps listed in HOW toRemove the Doors and Hinges.

J

iiiiii

S

t) Transfer (z_inetplugs alia screw_

to opposite sMe of cabinet. _o

• Remove plugs with flat blade of ;d J ...._-(

screwdr vet wrapped in masking tape. __ LMf_/

• Remove center mullion screws with ' ""_->J_Y

_/_" hex head driver. I°

I _ CAUTION

Toavoid possibleinjuryand damage to property:

• Place doors on a nonabrasive surface protected by

towels or rugs whi_e working directly on doors.

• DO NOT remove sub cap when removing bottom door

trim.

I3 emove door stop from _ }

fresh food door with Phillips - _.

screwdriver.

Remove top door trim by removing 4

screws. Lift handle corner of trim and

slide toward hinge edge of door.

For white, bisque, and black models, use aT-15 Torx®'head

driver.

For stainless steel models, use a Phillips screwdriver.

Retain allscrews for later use.

Ia evo'se handle by removing two T-15 1

Torx head so'ews from top and

bottom edge of handle and reattaching

handle on opposite side of dorm.

1nstall top door trim on bottom side °f

doo_ and bottom trim on _ side of do_:

• Locate hinge hole corner oftrim. Instal_hinge hole comer of trim

on hinge side first,then installhandle edge of _im.

and Hinges.

f 4 Remove bottom door trim by removing 4 "_

] Phelps so'ews.

J

L • Lift handle comer of trim and slide toward hinge edge of door.

How to Replace the Door and Hinges

I1 Install hinge assemblies. 1

Install center hinge with Phillips screws.

Install stabilizing bracket with 3/8"hex head screws.

I3 lace hinge side of refrigerator dooron center hinge pin.

While holding refrigerator I 1,

door upright, tighten down top_ _]

•

hinge with U_6"hex head drtve_

Replace hinge cover. II_J

*Torx® is a registered trademark of Textron, Inc.

6

Installing Your Refrigerator

How to Remove and Install the Pullout Drawer

WARNING

To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before

removing doors. After replacing doors, connect power.

CAUTION

To avoid possible injury, product, or property damage, you will need two people to perform the following instructions.

Removing Pullout Drawer

full extension. Remove

Phillips screw from

each Side of rail

system.

Installing Pullout Drawer

m

Pull upper basket out

to full extension, and

lift out to remove.

"_ With drawer pulled out to I\

_full extension, insert lower __

basket by aligning tabs on

both side of lower basket ,,_,"_

with notches in raa assembly. F

I4 lide upper basket into ___[___

unit. Make sure that

rear of basket hooks l___/]

behind rail catch. __J7

Installing Your Refrigerator

How to Connect the Water Supply

WARNING

To reduce the risk of injury or death, follow basic precautions, including the following:

• Read all instructions before installing device.

• DO NOT attempt installation if instructions are not understood or if they are beyond personal skill level.

• Observe all local codes and ordinances.

• DO NOT service device unless specifically recommended in owner's manual or published user-repair

instructions.

• Disconnect power to unit prior to installing device.

CAUTION

To avoid property damage or possible injury, follow basic precautions, including the

following;

• Consult a plumber to connect copper tubing to household plumbing to assure compliance with local codes and

ordinances.

• Confirm water pressure to water valve is between 20 and 100 pounds per square inch. If water filter is installed,

water pressure to water valve must be a minimum of 35 pounds per square inch.

• DO NOT use a self-piercing, or 3/16"saddle valve! Both reduce water flow, become clogged with time, and

may cause leaks if repair is attempted.

• Tighten nuts by hand to prevent cross threading. Finish tightening nuts with pliers and wrenches. Do not

overtighten.

• Wait 24 hours before placing unit into final position to check and correct any water leaks.

Materials Needed

1/4"outer diameter flexible copper tubing

NOTE: Add 8' to tubing length needed

to reach water supply for creation of

service loop.

• Shut-off valve (requires a 1/4" hole to

be drilled into water supply before

valve attachment)

• Adjustable wrench

114"hex nut driver

Create service loop with _ [ _ Slide brass nut over sleeve

l tubing using care to avoid _ J and screw nut into inletport.

kinksintubing. _0 _ [ Tightennutwithwrench. 1

.;j IMpoRtANt:DONOTove,ighten.

Cross threading may occur.

"I

_. Remove plastic cap from c'_

re'water valve inlet port. 6

I3 Place brass nut (A) and A\ B

sleeve (B) on copper _ _LX I

tube end as illustrate ' .J

"x

Place end

of

copper tubing into_ _ _-\_ hours. Correct leaks, if necessary. J

4 watervalveinletport. Shape _]ll I 7M°nit°rwaterc°nnecti°nf°r24

tubing slightly-OO NOT KINK- HI

so that tubing feeds straight _ll l

into inlet port. _ _J

Installing Your Refrigerator

How to Level Your Refrigerator

If your refrigerator requires an ice maker water supply connection, proceed to water supply section before leveling your refrigerator.

CAUTION

To protect personal property or unit from damage, observe the following:

• Protect soft vinyl or other flooring with cardboard, rugs, or other protective material.

• Do not use power tools when performing leveling procedure•

MateJqalsNeeded • 3/8" hex head driver • Level

1 Move refrigerator to final location 1

and plug in power cord.

Remove toe grille

and bottom cover(s5

Turn left and right adjustment

screws (A) to raise or lower A

• Make sure refrigerator cabinet islevel

from side to side by adjusting left and

rightrolleradjustment screws.

_oor.

usinga level make sure front of !

refrigerator is 1/4"(6 ram) or 1/2 bubble

higher than back of refrigerator.

, • See leveling step 3 for assistance•

_Replace toe grille and bracket

.J cover(s). See markings on inside of

grille to insure proper placement. Z

toe

• Snap bottom portion into place first• Press

down on top part of grille until top portion snaps

into place.

How to Adjust the Temperature Controls

This refrigerator is designed to operate at a household temperature of 55 ° to 110°F (13 ° to 43 ° C). For initial temperature

setting, follow all five steps listed below. If doing a simple temperature modification for an operational unit, only steps 3

through 5 are required.

1 Locate refrigerator controls at the top of refrigerator ] How do I perform

compartment and freezer controls at top or freezer | a temperature test?

section. Set both controls to 31/2. IMPORTANT: Neither sectionwill | Materials needed

cool if freezer control is set to Off.) . 2 thermometers measuring -5 °

(2 ) to 50°F (-21° to 10°C)

Allow 24 hours for temperatures to stabilize. • 2 drinking glasses

For Freezer

I3 Check tO see if freezer temperature is O° to 2° F (-17° to -16° C)._ " Place thermometer in glass of

Turn control to next highest number iftoo warm. _._,_-,_'"_ '-___ | andVegetablecontinue°ilinwithmiddlestepOffreezer3of

H

• Turn control to next lowest number if too cold Allow 5 Ii_J_?dl |

to 8 hours for adjustments to take effect. ) temperature adjustment section.

f_- ('_t IMPORTANT: Always start temperatureChecktoseethatre___eratorse_tionis38°to40°F___O4°fri2(3 °t adjustments with freezer section.

J., Turn control to next highest number if too warm. _ |

• Turn control to next lowest number if too cold• _.__-- | For Refrigerator

_,, • Allow 5 to 8 hours for adjustments to take effect. _ ,J • Place thermometer in glass of

water in middle of unit and

r _ Repeat steps 3 & 4, as necessary. _ continue with step 3 of

%1 )

temperature adjustment section.

9

About Your Water Filter...

Water Filter Removal and Installation

WARNING

To avoid serious illness or death, do not use unit where water is unsafe or of unknown quality without adequate

disinfection before or after use of filter.

CAUTION

• Bypass cartridge DOES NOT filter water. Be sure to have replacement cartridge available when filter change is required.

• If water filtration system has been allowed to freeze, replace filter cartridge.

• If system has not been used for several months, and water has an unpleasant taste or odor, flush system by dispensing

2-3 glasses of water. If unpleasant taste or odor persists, change filter cartridge.

When do I change the

water filter?

The average replacement time for

filter replacement is 3 months.

IMPORTANT: Condition of water

and amount used determines life

span of water filter cartridge. If

water use is high, or if water is of

poor quality, replacement may need

to take place more often.

How do I order a

replacement filter

cartridge?

Kenmore ° replacement water filter

cartridge model 9005 is available

through Sears dealers and servicers.

You may also order through Sears by

using the information on the back cover.

Initial Install of Water Filter

Remove sealing label from

end of filter and inser__ --]

into filter head. _._ _ ]

• Rotate gently clockwise until filter _'_ 1! ]

stops, and snap filter cover closed. _ \ )

Reduce water spurts by flushing air

from system. Run water continuously

for 2 minutes through dispenser until

water runs steady.

• Additional flushing may be required in some

_, households where water is of poor quality.

#

I'm trying to dispense

water to flush the ,

system. Where's

the water?

During initial use, allow about a 1 to 2

minute delay in water dispersal to allow

internal water tank to fill.

What if I choose not to

use the water filtration

system?

Dispenser feature may be used without

water filter cartridge. If you choose this

option, replace filter with blue bypass cap.

Replacing Water Filter

IMPORTANT: Air trapped in system may cause water and

cartridge to eject. Use caution when removing.

I1 urn filter counterclockwise until it

releases from filter head.

I2 Drain water from filter into sink, and

1

dispose in normal household garbage. ]

J

I3 Wipe up excess water in filter cover 1

and continue with Initial Install of

Water Filter, steps 2 and 3.

] 0

Refrigerator Features

Primary Features

Water Dispenser 4__

A water dispenser is located on the left side

wall of the refrigerator section. This design is for

cold water dispensing only. A water sump has

been designed below the dispenser to catch

drips and minor spills.

To dispense water:

• Hold container under spout and press dispenser pad, as

illustrated.

What are the cleaning instructions

for the water sump?

The sump has been designed for easy-access cleaning. The sump

is built into the floor of the refrigerator section. Spills can be wiped up

with a towel.

It may be required to clean the sump to remove water or mineral

deposits. Sumps may be washed with soap and water.

IMPORTANT: The sump does not contain a drain. Spills

must be wiped up occasionally to remove water.

===

Interior Shelves

CAUTION

To avoid personal injury or property damage, observe the

following:

• Confirm shelf is secure before placing items on shelf.

• Handle tempered glass shelves carefully. Shelves may

break suddenly if nicked, scratched, or exposed to

sudden temperature change.

Spillproof Shelves

Spillproof stationary shelves hold

simple spills for easier cleaning.

To remove shelves, lift up and out.

To install shelves, reverse above

procedure.

Spillproof Slide-Out

Spillproof slide-out shelves feature the

convenience of easy cleaning with a

pullout design to reach items in

the back. For ease of cleaning,

glass shelf may be removed

by pulling to full extension and

lifting out of frame.

Door Storage

r

Dairy Center

The dairy center provides convenient

storage for items such as butter,

yogurt, cheese, etc. This compartment

is an adjustable feature located in the

door. It can be moved to several

different locations to accommodate storage needs.

To remove, open dairy door, pull upward and tilt out.

• To install, reverse above procedure.

Door Buckets _oh

Door buckets adjust to meet individual storage ,.__needs_

To remove, slide bucket up and pull

straight out. _L__ _-_'_-_

• To install, reverse above procedure. ! _,:.

Door Retainer

(some models)

Door retainers remove for easy cleaning.

• To remove, slide retainer up and pull

straight out.

• To install, reverse above procedure.

O

m

Accessories

r

Covered Storage Bucket

Storage bucket has a lid and removable

egg tray. When tray is removed, bucket

will accept items such as a standard egg

carton, ice, etc.

]]

Refrigerator Features

How do I remove the glass

and crisper frame ifI want to

clean it?

• Removethe drawersas instructedatle&

• Placehandbeneathframe

topush upglass from _ J

underneath. _

Li_glass out. _,/J

• Liftframefrom

refrigeratorlinerrails.

• Toinstall,repeatabove

instructionsin reverseorder.

What can I do to prolong

the life of my produce?

Pleaseobservethefollowingruleswhen storing

produceinhumidity-controlledcrisperdrawers:

• DONOTwash producebeforeplacingin

crispers.Any additionalmoistureaddedto

thedrawers may cause produceto

prematurelysboil.

• DONOTline crisperswith papertowels.

Towelswillretainmoisture.

• Followcontrolinstructionscarefully.Not

settingcontrolscorrectly may damage

produce.

See chart below for assistance with

humidity drawer controls:

Climate-Controlled Drawers

Humidity-Controlled Crisper Drawers

The crisper drawer keeps produce fresh longer by

providing an environment with adjustable humidity.

Controls

The crisper controls regulate the amount

of humidity in the crisper drawer. Use the

low setting for produce with outer skins.

Use the high setting for leafy produce.

To remove and install crisper drawers:

To remove drawer, pull drawer out to full

extension. Tilt up front of drawer and pull

straight out.

To install, insert drawer into frame rails

and push back into place.

Storage Drawer

This drawer can be used for large party

trays, dell items, or beverages.

To remove and install drawers:

To remove drawer, pull drawer

out to full extension. Tilt up front

of drawer and pull straight out.

To install, insert drawer into

frame rails and push back into

place.

LOW

HIGH

• cauliflower • zucchini

• apples • grapes

•com • cucumbers

• oranges

• lettuce • celery

• asparagus • broccoli

• spinach • fresh sprouts

• cabbage • fresh herbs

]2

Primary Features

Automatic Ice Maker

CAUTION

To avoid property damage, observe the following:

• Do not force ice maker arm down or up.

• Do not place or store anything in ice storage bin.

Using Ice Maker for the First Time_

• Confirm ice bin is in place and ice

maker arm is down. |

/

• After freezer section reaches |

between 0° to 2°F (-18°to -17 ° C), ice C

maker fills with water and begins operating.

• Allow approximately 24 hours after installation to receive

first harvest of ice.

Discard ice created within first 12 hours of operation to

verify system is flushed of impurities.

Operating Instructions

Confirm ice bin is in place and ice maker arm is down.

After freezer section reaches 0° to 2°F (-18 ° to -17 ° C), ice

maker fills with water and begins operating. You will have

a complete harvest of ice approximately every 3 hours.

Freezer Features

m

Drawers

r Pullout Drawer Baskets

(Door assembly of drawer removed from illustration for

visual clarity)

To remove and replace top basket:

Remove basket by pulling

basket out to its full extension

and lift out.

Replace basket by

sliding into upper

molded railing.

To remove and replace bottom

basket:

Remove basket by lifting basket from rail guides.

Replace basket by placing into rail guides.

DANGER

To prevent accidental child entrapment or suffocation risk

DO NOT remove the divider in the top freezer basket.

]3

@ o@

Hints and Care

How do I remove

an odor from my _

refrigerator?

.Removea,food.

2. Disconnect refrigerator.

3. Clean the following items

using the appropriate instructions in

"How to Clean Your Unit" :

• Walls, floor, and ceiling of

cabinet interior.

• Drawers, shelves, and gaskets

according to the instructions in

this section.

4. Pay special attention to all crevices

by completing the following steps:

• Dilute mild detergent and brush

solution into crevices using a

plastic bristle brush.

• Let stand for 5 minutes.

• Rinse surfaces with warm

water. Dry surfaces with a soft,

clean cloth.

5. Wash and dry all bottles,

containers, and jars. Discard

spoiled or expired items.

6. Wrap or store odor-causing foods in

tightly-sealed containers to prevent

reoccurring odors.

7. Connect power to refrigerator and

return food to unit.

8. After 24 hours, check if odor has

been eliminated.

If odor is still present...

1. Remove drawers and place on top

shelf of refrigerator.

2. Pack refrigerator and freezer

sections-including doors-with

crumpled sheets of black and white

newspaper.

3. Place charcoal briquettes randomly

on crumpled newspaper in both

freezer and refrigerator

compartments.

4. Close doors and let stand 24-48

hours.

5. Repeat steps 5 through 7.

If odor was not eliminated, contact

Sears Service Center. Refer to back of

manual for phone number.

How to Clean Your Unit

I A WARNING ]

To avoid electrical shock which can cause severe personal injury or death,

disconnect power to refrigerator before cleaning. After cleaning, connect power.

I CAUTION ]

To avoid personal injuryor property damage:

• Read and follow manufacturer's directionsfor allcleaning products

• Do not place buckets, shelves, or accessories in dishwasher Cracking or

warping of accessories may result

_d{FA

Textured Doors

and Exterior

Cabinet Interior

Stainless Steel Doors

and Exterior*

IMPORTANq2

Damage to stainless steel

finish due to improper use

of cleaning products or

non-recommended

products is not covered

under warranty

Dispenser Controls

Door Gaskets

Condenser Coil

Remove toe gritle to

access

Condenser Fan Outlet

Grille

See back of refrigerator

Accessories

Shelves, buckets,

drawers, etc

DO NOT USE

• Abrasive or harsh cleaners

• Ammonia

• Concentrated detergents or

solvents

• Metal or plastic-textured

scouring pads

• Abrasive or harsh cleaners

• Ammonia

• Chlorine bleach

• Concentrated detergents or

sotvents

• Metal or pIastic-textured

scouring pads

• Vinegar-based product

• Citrus-based product

• Abrasive or harsh cleaners

• Ammonia

• Chlorine bleach

• Concentrated detergents or

solvents

• Metat or plastic-textured

scouring pads

• Abrasive or harsh cleaners

• Metat or plastic-textured

scouring pads

N/A

• A dishwasher

Ol_...

• Use 4 tablespoons (60 miIliliters)

dissolved in 1 quart (1 liter)

warm soapy water

• Rinse surfaces with clean warm

water and dry immediately to

avoid water spots.

• Use warm, soapy water

and a soft, clean cloth or

sponge.

• Rinse surfaces with clean

warm water and dry

immediately to avoid

water spots

• Use a vacuum cleaner

hose nozzle.

• Use a vacuum cleaner

hose nozzle with brush

attachment

• Fottow removal and installation

instructions from appropriate

feature section.

• AIIow items to adjust to room

temperature.

• Dilute mild detergent and use

a soft clean cloth or sponge for

cleaning

• Use a plastic bristle brush to

get into crevices

• Rinse surfaces with clean,

warm water.

• Dry glass and clear items

immediately to avoid spots

* A stainless steel cleaner has been included inside the refrigerator for your use. To purchase

additional cleaner, please contact Sears using the information on the back of your manual

]4

Hints and Care

How to Remove and Replace Light Bulb .....

-_ How to Get the

] _/Most Out of

Your Energy

Dollar

[ ark WARNING

To avoid electrical shock which can cause severe personal injury or death,

disconnect power to refrigerator before replacing light bulb. After replacing light

bulb, connect power.

[ CAUTION

To avoid personal injury or property damage, observe the following:

• Allow light bulb to cool.

• Wear gloves when replacing light bulb.

• When placing refrigerator into final

position, allow for 1"clearancearound the top and sides of unit

to supply ample ventilation for

mmm

optimum energy efficiency.

• Avoid overcrowding refrigerator

shelves. This reduces effectivity of

air circulation around food and

causes refrigerator to run longer.

• Avoid adding too much warm food _1_

to unit at one time. This overloads _11

compartments and slows rate of

cooling.

• Do not use aluminum foil, wax

paper, or paper toweling as shelf

liners. This decreases air flow and

causes unit to run less efficiently.

• A freezer that is 2/3full runs most

efficiently.

Freezer section

1. Pinch rear tabs (,4) on light cover and pull

straight out.

2. Remove light bulb.

3. Replace bulb with appliance bulb no greater

than 40 watts.

4. insert top tabs (B) of light cover into refrigerator

liner and snap back portion over light assembly.

A

B

Locate refrigerator in coolest part

of room. Avoid areas of direct

sunlight, or near heating ducts,

registers, or other heat producing

appliances. If this is not possible,

isolate exterior by using a section

of cabinet or an added layer of

insulation.

Refer to use and care guide

section on temperature controls

for recommended control

settings.

Clean door gaskets every three

months according to use and

care guide instructions. This will

assure that door seals properly

and unit runs efficiently.

• Take time to organize items in

refrigerator to reduce time that

door is open.

Be sure your doors are closing

securely by leveling unit as

instructed in your owner's

manual.

]5

Clean condenser coils off as

indicated in the use and care

guide every 3 months. This will

increase energy efficiency and

cooling performance.

Trouble Shooting

Today's refrigerators have new features and are more energy efficient. Foam insulation is very energy

efficient and has excellent insulating capabilities, however, foam insulation is not as sound absorbent.

As a result, certain sounds may be unfamiliar. In time, these sounds will become familiar. Please refer to

this information before calling service.

Noise

TOPIC POSSIBLE CAUSE SOLUTION

Clicking

Air rushing or

whirrin9

Gurgling or

boiling sound

ping

Vibrating noise

Freezer control (A) clicks when starting or Normal operation

stopping compressor.

Defrost timer (B) sounds like an electric Normal operation

clock and snaps in and out of defrost

Hissing or

popping

Freezer fan (C) and condenser fan (D)

make this noise whiie c

Evaporator (E) and heat exchanger (F)

refrigerant makes this noise when flowing.

Ice cubes from ice maker (some models)

drop into ice bucket

Compressor (H) makes a pulsating sound

while running.

Refrigerator is not level.

Buzzing Ice maker water valve (I) hookup (some

models) buzzes when ice maker fills with

water.

Humming Ice maker (J) is in the 'on' position

without water connection.

Compressor (H) can make a high-pitched

hum while operating.

Normal operationDefrost heater (K) hisses, sizzles or pops

when operational.

Normal operation

See "Installing Your

Refrigerator" for details on

how to level your unit.

Normal operation

Stop sound by raising ice

maker arm to 'off' position.

See "Automatic Ice Maker"

selection for details.

Normal operation

OPERATION

Freezer control Refrigerator is in defrost mode. Normal operation. Wait 40 minutes to see if refrigerator restarts.

and lights are on

but compressor

is not operating

Crisper drawer Drawer control settings are too low.

temperature is

too warm Freezer controls are set too Iow.

Drawer is improperly positioned.

Refrigeratordoe.,

not operate

Refrigerator still

won't operate

Food temperatur_

is too cold

Refrigerator is not plugged in.

Freezer controi is not on.

Fuse is blown, or circuit breaker needs

to be reset.

Power outage has occurred.

Unit is malfunctioning.

Condenser coils are dirty.

Refrigerator or freezer controls are set

too high.

See section on "Refrigerator Features-Humidity-Controlled Crisper

Drawers" to adjust controls.

See "Installing Your Refrigerator-How to Adjust the

Temperature Controls" section on how to adjust your

controls.

See section on "Refrigerator Features-Humidity- Controlled Crisper

Drawers" to verify drawer positioning.

Plug in unit.

See section on "Refrigerator Features-Humidity-Controlled Crisper

Drawers" to adjust controls.

Replace any blown fuses. Check circuit breaker and reset, if.

necessary.

Call local power company listing to report outage.

Unplug refrigerator and transfer food to another unit. If another

unit is not available, place dry ice in freezer section to preserve

food. Warranty does not cover food loss.

Contact service for assistance.

See section on "Hints and Care - How to Clean Your Unit"

for instructions.

See section on "Refrigerator Features-Humidity-Controlled Crisper

Drawers" to adjust controls.

]6

OPERATION

TOPIC

Trouble Shooting

POSSIBLE CAUSE SOLUTION

Food temperature

appears too warm

Refrigerator has an odor

Water droplets form on

outside of refrigerator

Water droplets form on

inside of refrigerator

Door is not closing properly.

Controls need to be adjusted.

Condenser coils are dirty.

Rear air grille is blocked.

Door has been opened frequently, or

has been opened for long periods

Food has recently been added.

Compartment is dirty or has odor-

causing food.

Check gaskets for proper seal.

Humidity levels are high.

Controls require adjustment.

Humidity levels are high or door

been opened frequently.

Check gaskets for proper seal.

See "installing Your Refrigerator-How to Level Your

Refrigerator" section on how to properly level unit.

Check gaskets for proper seal. Clean, if necessary, according to

cleaning instructions.

Check for internal obstructions that are keeping door from closing

properly (i.e. improperly closed drawers, ice buckets, oversized

or improperly stored containers or foodstuffs, etc.)

See "Installing Your Refrigerator-How to Adjust the

Temperature Controls" section on hew to adjust your controls.

See section on "Hints and Care-How to Clean Your Unit" for

instructions.

Check the positioning of food items in refrigerator to make sure

grille is not blocked. Rear air grilles are located under crisper

drawers.

Reduce time door is open. Organize food items efficiently to

assure door is open for as short a time as possible.

Allow interior environment to adjust for period the door has been

open.

Allow time for recently added food to reach refrigerator or freezer

temperature.

See section on "Hints and Care" for instructions.

See section on "Hints and Care-How to Clean Your Unit" for

instructions.

See "Installing Your Refrigerator-How to Adjust the

Temperature Controls" section on how to adjust your controls.

See "Installing Your Refrigerator-How to Adjust the

Temperature Controls" section on how to adjust your controls.

See "lnstaliating Your Refrigerator-How to Adjust the

Temperature Controls" section on how to adjust your controls.

Reduce time door is open. Organize food items efficiently to

assure door is open for as short a time as possible.

See section on "Hints and Care-How to Clean Your Unit" for

instructions.

Refer to noise section of troubleshooting guide.Refrigerator or ice maker Normal operation.

make unfamiliar sounds or

seems too loud

Crisper drawers do not Contents of drawer, or positioning of Reposition food items and containers to avoid interference with

close freely items in the surrounding compartment the drawers.

could be obstructing drawer.

Drawer is not in proper position.

Refrigerator is net level.

Drawer channels are dirty or need

treatment.

Doors havebeen opened frequently or

have been openedfor long periods of

time.

Humidity or heat in surrounding area

is high.

Food has recently been added.

Refrigerator runs too

frequently

Unit is exposed to heat by

environment or by appliances nearby.

Condenser coils are dirty.

See section on "Refrigerator Features-Humidity-Controlled Crisper

Drawers to verify drawer positioning.

See "Installing Your Refrigerator-How to Level Your

Refrigerator" section on how to properly level unit.

Clean drawer channels with warm, soapy water. Rinse and dry

thoroughly.

Apply a thin layer ot petroleum jelly to drawer channels.

Reduce time door is open. Organize food items efficiently to

assure door is open for asshort atime as possible.

Allow interiorenvironment to adjust for periodthe door has

been open.

Normal operation.

Allow time for recently-added food to reach refrigerator or

freezer temperature.

Evaluate your unit's environment. Unit may need to be moved to

run more efficiently.

See section on "Hints and Care-How to Clean Your Unit" for

instructions.

]7

m

Trouble Shooting

OPERATION (continued)

POSSIBLE CAUSETOPIC

Refrigeratorrunstoo

SOLUTION

Controls need to be adjusted.

Door is not closing properly.

See "Installing Your Refrigerator-How toAdjust the

Temperature Controls" section on how to adjust your controls.

See "Installing Your Refrigerator-How to Level Your

Refrigerator" section on how to properly level unit.

Check gaskets for proper seal. Clean, if necessary. See

section on "Hints and Care-How to Clean Your Unit" for

instructions.

Check for internal obstructions that are keeping door from

closing properly (i.e.improperly closed drawers, ice buckets,

oversized or improperly stored containers or foodstuffs, etc.)

ICE

Unit is leaking water

Ice forms in inlettube to ice

maker

Water flow is slower than

Plastic tubing was used to complete water

connection.

Improper water valve was installed.

Water pressure is low.

Freezer temperature is too high.

Water pressure is low.

Improper water valve was installed.

Sears recommends using copper tubing for installation.

Plastic is less durable and can cause leakage. Sears is

not responsible for property damage due to improper

installation or water connection.

See section on "Installing Your Refrigerator-How to

Connect the Water Supply" for Instructions. Self-piercing and

3A6"saddle valves cause low water pressure and may clog the

line over time. Sears is not responsible for property

damage due to improper installation or water connection.

Water pressure must be between 20 to 100 pounds per

square inch to function properly.A minimum pressure of 35

pounds per square inch is recommended for units with water

filters.

See "Installing Your Refrigerator-How to Adjust the

Temperature Controls" section on howto adjust your controls.

Freezer is recommended to be between Oto 2°F

(-18 to-17 o C).

Water pressure must be between 20 to 100 pounds per

square inch to function properly.A minimum pressure of 35

pounds per square inch is recommended for units with water

filters.

See section on "Installing Your Refrigerator-How to

Connect the Water Supply" for instructions. Self-piercing and

3A6"saddle valves cause low water pressure and may clog the

line over time. Sears is not responsible for property

damage due to improper installation or water connection.

]8

Water Filter Data

System Specification and Performance Data Sheet

® Refrigerator Water Filter Cartridge Model 9005

I Specifications

Service Flow Rate (Maximum) ............................................. 075 GPM (2.83 L/min)

Rated Service Life Model 9005 (Maximum) ......................... 500 gallons/ 1892 liters

Maximum Operating Temperature ........................................ 100 ° F/38 ° C

Minimum Pressure Requirement .......................................... 35 psi/ 138 kPa

Maximum Operating Pressure .............................................. 120 psi/827 kPa

General Use Conditions: Read this Performance Data Sheet and compare the capabilities of this unit with your actual

water treatment needs.

The retractable water filtration system uses a 9005 replacement cartridge (see Sears contact information at the front of your

manual to order). Timely replacement of filter cartridge is essential for performance satisfaction from this filtration system.

Please refer to the applicable section in this Use and Care Guide for general operation, maintenance requirements and

troubleshooting.

This system has been tested according to ANSA1/NSF 42 and 53 for reduction of the substances listed below.

The concentration of the indicated substances in water entering the system was reduced to a concentration less

than or equal to the permissible limit for water leaving the system, as specified in ANSI/NSF 42 and 53.

Performance Data*

Influent Challenge Effluent Average % Maximum Min. Required Inlet

Substance Concentration Average Reduction Effluent Reduction pH

Lead 0.15 mg/L +/- 10% 0.001 mg/L 99.33% 0.001 mg/L 0.010 mgiL 6.5

Lead 0.15 mg/L +/- 10% 0.002 mg/L 98.66% 0.003 mg/L 0.010 mglL 8.5

Cyst Minimum 50,000/L lcount/mL 99.99% 3 count/mL >99.95% NA

Turbidity 11+/-1 NTU 0.12 NTU 98.98% 0.18NTU 0.5 NTU NA

Lindane 0.002 mg/L +/- 10% 0.00005 mg/L 92.06% 0.00005 mg/L 0.00002 mg/L NA

Atrazine 0.009 mg/L +/- 10% 0.0002 mg/L 97.93% 0.0006 mg/L 0.003 mg/L NA

Chlorine 2.0 mg/L +/- 10% 0.09 mg/L 95.26% 0.17 mg/L _>75% NA

Particulate** at least 10,000 900 count/mL 99.68% 2400 count/mL _>85% NA

particles/mL

2,4-D 0.210 mg/L +/- 10% 45.45 ug/L 84.42% 100 ug/L 0.0017 mg/L NA

Asbestos 107tol08 fibers/L;fibersgreater 0.16 MFL/mL 99.96% 0.16 MFL/mL 99% NA

than10micometersin length

Tested usin( a flow rate of 0.75 GPM (2.83 L/min.) and a maximum pressure of 120 psi (827 kPa) under standard

laboratory conditions, however, actual performance may vary. Health Claim Performance tested and certified by NSF

international

** Particle size range classification of test. Particles used were 0.5-1 microns.

Pentapure, Incorporated

1000 Apollo Road

Eagan, Minnesota U.S.A.

EPA EST #35917-MN-1

Tested and Certified by NSF International against ANSI/NSF Standards

42 & 53 in models WF50-KNI300 and WF50-KWI 500 for the reduction of.

StandardNo. 42 Aesthetic Effects

Taste& Odor Reduction

Chlorine Reduction

Mechanical Filtration Unit

Particlate Reduction Class 1

Standard No. 53: Health Effects

Chemical Reduction Unit

Lead,A_azine,L#_dane& 2,4-DReductiorl

Mechanical Filtration Unit

Cyst, Turbidity,&Asbestos Reduction

]9

DO NOT use this product where water is microbiologically unsafe or of unknown quality without adequate disinfection

before or after the system. System certified for cyst reduction may be used on disinfected water that may contain

filterable cysts.

USE ONLY WITH COLD WATER SUPPLY. CHECK FOR COMPLIANCE WITH THE STATE AND LOCAL LAWS AND REGULATIONS.

State of California

Department of Health Services

Water Treatment Device

Certificate Number

01-1486

Date Issued: September 21, 2001

Date Revised: March 20, 2002

Trademark/Model Designation Replacement Elements Rated Capacity

WF50-W1500 WF50 500 gal

WF50-NI300 WF50 300 gal

WF50-KWI500 46 9005 500 gal

WF50-KNI300 46 9005 300 gal

OWF50-WI500 OWF51 500 gal

OWF50-NI300 OWF51 300 gal

Manufacturer: PentaPure Incorporated

The water treatment device(s) listed on this certificate have met the testing requirements pursuant to Section

116830 of the Health and Safety Code for the following health related contaminants:

Microbiological Contaminants and Turbidity

Cysts

norqanic/Radioloqical Contaminants

Asbestos

Lead

Organic Contaminants

Atrazine

Lindane

Rated Service Flow: 0.75

2O

Page is loading ...

Kenmore Elite 59672284200 Owner's manual

This manual is also suitable for

Kenmore Elite 59672284200 Owner's manual

in other languages

Related papers

Other documents