i=" E:
®
Bottom-Freezer Refrigerator
Use & Care Guide
Refrigerador con montaje inferior
Manual de usoy cuidado
R_frig_rateur a compartiment inf_rieur
Guide d'utilisation et d'entretien
m
Z
O
m
W
596.72282200,596.72283200,596.72284200,596.72289200
\
I
_,,
Za
0
"11
m
_,,
Z
12642712
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com
Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8 Au Canada, www.sears.ca
l_Recognize this symbol as a safety alert indicator.
WARNING
Toavoid electrical shock which can cause severe personal injury or death, do not cut or remove the round
grounding prong from the plug. Refrigerator must be grounded at all times. Do not remove warning tag from cord.
Do not use a two-prong adaptor. Do not use an extension cord.
Electrical Grounding Instructions-This refrigerator is equipped with a three-prong (grounding) plug for protection
against possible shock hazards. If you encounter a two-prong receptacle, contact a qualified electrician and have
the two-prong wall receptacle replaced with a properly grounded three-prong wall receptacle in accordance with the
National Electrical Code. Refrigerator is designed to operate on a separate 103 to 126 volt, 15 amp., 60 cycle line.
DANGER
IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned
refrigerators are still dangerousieven if they will sit for "just afew days". If you discard an old refrigerator,
please follow the instructions below to help prevent accidents.
BEFORE YOU THROWAWAYYOUR OLD REFRIGERATOR OR FREEZER:
• Take off the doors.
• Leave the shelves in place so children may not easily climb inside.
We Service What We Sell
Your purchase has added value because you can depend on Sears HomeCentral ®for service. With over 12,000 trained repair
specialists and access to over 4.2 million parts and accessories, we have the tools, parts, and knowledge and skills to ensure
our pledge: We Service What We Sell.
Sears Maintenance Agreements
Your Kenmore appliance is designed, manufactured and tested to provide years of dependable operation. Yet any major
appliance may require service from time to time. The Sears Maintenance Agreement offers you an outstanding service
program, affordably priced.
The Sears Maintenance Agreement
Is your way to buy tomorrow's service at today's price.
Eliminates repair bills resulting from normal wear and tear. Some limitations apply. For more information,
Provides for nontechnical and instructional assistance, call 1-800-361-6655.
Even if you don't need repairs, provides an annual Preventative
Maintenance Check, at your request, to ensure that your appliance
is in proper running condition.
For information concerning Sears Canada
Maintenance Agreements, call 1-800-361-6665.
Full One Year Warranty on Refrigerator
For one year from the date of purchase, when this refrigerator is operated and maintained according to instructions attached
to or furnished with it, Sears will repair it, free of charge, if defective in material or workmanship.
Full Five Year Warranty on Sealed Refrigeration System
For five years from the date of purchase, when this refrigerator is operated and maintained according to instructions attached
to or furnished with it, Sears will repair the sealed system (consisting of refrigerator, connecting tubing and compressor
motor) free of charge, if defective in material or workmanship.
The above warranty coverage applies only to refrigerators which are used for storage of food for private household purposes.
It excludes original and replacement Kenmore ice & water filter cartridges (if equipped with the filter system). Original and
replacement cartridges are warranted for 30 days, parts only, against defects of material or workmanship.
Warranty service is available by contacting 1-800-4-MY-HOME (1-800-469-4663).
This warranty applies only while this product is in use in the United States.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
Full One Year Warranty on Refrigerator
For one year from the date of purchase, when this refrigerator is operated and maintained according to instructions attached
to or furnished with it, Sears will repair it, free of charge, if defective in material or workmanship.
Full Five Year Warranty on Sealed Refrigeration System
For five years from the date of purchase, when this refrigerator is operated and maintained according to instructions attached
to or furnished with it, Sears will repair the sealed system (consisting of refrigerant, evaporator, and condenser) free of
charge, if defective in material or workmanship.
Ten Year Parts Warranty on Compressor
For ten years from the date of purchase, when this refrigerator is operated and maintained according to instructions attached
to or furnished with it, Sears will replace any compressor part, if defective in material or workmanship.
The above warranty coverage applies only to refrigerators which are used for storage of food for private household purposes.
It excludes original and replacement Kenmore filtered ice & water filter cartridges (if equipped with the filter system). Original
and replacement cartridges are warranted for 30 days, parts only, against defects of material or workmanship.
Warranty service is available by contacting 1-8O0-4-MY-HOME or (1-800-469-4663).
Sears Canada, Inc., Toronto, Canada, M5B 2B8
m
In the space below record the model and serial numbers and
3urchase date of your refrigerator. You will find the model and
serial number sticker inside the unit on the left wall of
refrigerator section.
Model Number: 596.
Serial Number:
Purchase Date:
Keep this booklet and your Sears sales receipt in a
safe place for future reference.
Recognize Safety Symbols, Words, Labels
DANGER I
DANGER--Immediate hazards which WILL result in severe personal injury or
death.
[ WARNING I
WARNING--Hazards or unsafe practiceswhich COULD resultin severe personal
injuryor death.
[ CAUTION I
CAUTION--Hazards or unsafe practiceswhich COULD resultin minor personal
injuryor product or property damage.
What You Need to Know
about Safety Instructions
Warning and Important Safety
Instructions appearing in this manual are
not meant to cover all possible
conditions and situations that may occur.
Common sense, caution, and care must
be exercised when installing,
maintaining, or operating refrigerator.
Always contact your dealer, distributor,
service agent, or manufacturer about
problems or conditions you do not
understand.
ElectricalRequirements...........................................2
MaintenanceAgreement...........................................2
Warranty....................................................................2
Warranty-Canada....................................................3
ProductRecord.........................................................3
ImportantSafetyInformation....................................3
InstallingYourRefrigerator.......................................5
HowtoTransportYourUnit..................................5
HowtoSelecttheBestLocation..........................5
HowtoRemovetheDoorsandHinges...............5
HowtoReverseRefrigeratorDoor.......................6
HowtoReplacetheDoorsandHinges...............6
HowtoRemoveandInstallthePulloutDrawer...7
HowtoConnecttheWaterSupply........................8
HowtoLevelYourRefrigerator.............................9
HowtoAdjusttheTemperatureControls.............9
AboutYourWaterFilter.......................................10
RefrigeratorFeatures..............................................11
PrimaryFeatures.................................................11
InteriorShelves....................................................11
DoorStorage........................................................11
Accessories.........................................................11
Climate-ControlledDrawers..............................12
FreezerFeatures....................................................13
PrimaryFeatures................................................13
Drawers..............................................................13
HintsandCare.......................................................14
HowtoCleanYourUnit......................................14
HowtoRemoveandReplaceLightBulbs.........15
Troubleshooting.....................................................16
WaterFilterData.....................................................19
Service......................................................BackCover
4
Installing Your Refrigerator
These instructions were provided to aid you in the installation of your unit. Sears cannot be responsible for improper installation.
How to Transport Your Unit
Follow these tips when moving the unit to final location:
NEVER transport unit on its side. If an upright position is not possible, lay unit on its
back. Allow unit to sit upright for approximately 30 minutes prior to plugging unit in
to assure oil return to the compressor. Plugging unit in immediately may cause
damage to internal parts.
Use an appliance dolly when moving unit. ALWAYS truck unit from its side-NEVER
from its front or back.
Protect outside finish of unit during transport by wrapping cabinet in blankets or
inserting padding between the unit and dolly.
Secure unit to dolly firmly with straps. Thread straps through handles when
possible. DO NOT overtighten. Overtightening restraints may dent or damage outside
finish.
How to Select the Best Location
Observe these points when choosing the final location for your unit:
DO NOT install refrigerator near oven, radiator, or other heat source. If not possible,
shield unit with cabinet material.
DO NOT install where temperature falls below 55°F (13°C). Malfunction may occur at
this temperature.
Make sure floor is level. If floor is not level, shim rear wheels of unit with a piece of
plywood or other shim material.
To assure proper door closure, verify that the unit is leveled with a 1/4" tilt to the back.
How do I measure
an opening to
insure proper fit?
A 1/2"of air space should be provided
for the top and back of the unit to allow
for proper air circulation. When
installing your unit, measure carefully.
Subflooring or floor coverings (i.e.
carpet, tile, wood floors, rugs) may IIIIII
make your opening smaller than
anticipated.
Some clearance may be gained by
using the leveling procedure under p
"How to Level Your Refrigerator". II
OI
IMPORTANT: If unit is to be installed
into a recess where top of unit is
completely covered, use dimensions
from floor to top of hinge cap to verify
proper clearance.
How to Remove the Doors and Hinges
Some installations require door removal to get refrigerator to final location. If removal of the pullout drawer is required, see
later section entitled How to Remove and Install the Pullout Drawer
WARNING
To avoid electrical shock which can cause severe personal injury or death, observe the following:
• Disconnect power to refrigerator before removing doors. Connect power only after replacing doors.
CAUTION
To avoid damage to walls and flooring, protect soft vinyl or other flooring with cardboard, rugs, or other protective material.
1 Unplug power cord from power source. )
2Remove toe grille and _ ]
bottom bracket cover(s).__ L I
• Open freezer door as wide as possible. '_/J
3 Rem°ve t°p hinge c°ver by _ ]
removing Phillips screw.
• Retain screw and cover for replacement. _)
r_ Unscrew 5/1(,"hex head screws _ ."
-I from top binge to remove hinge._L't_
L . Retain all screws for later use.
5Lift refrigeratordoor from _) _ ]
center binge pin, and remove .//_._ I
in with 'A6"hex nut driveJ _ l
• Retain hinge pin for later use. J f '_
Installing Your Refrigerator
How to Reverse Refrigerator Door
1 Perform all steps listed in HOW toRemove the Doors and Hinges.
J
iiiiii
S
t) Transfer (z_inetplugs alia screw_
to opposite sMe of cabinet. _o
• Remove plugs with flat blade of ;d J ...._-(
screwdr vet wrapped in masking tape. __ LMf_/
• Remove center mullion screws with ' ""_->J_Y
_/_" hex head driver. I°
I _ CAUTION
Toavoid possibleinjuryand damage to property:
• Place doors on a nonabrasive surface protected by
towels or rugs whi_e working directly on doors.
• DO NOT remove sub cap when removing bottom door
trim.
I3 emove door stop from _ }
fresh food door with Phillips - _.
screwdriver.
Remove top door trim by removing 4
screws. Lift handle corner of trim and
slide toward hinge edge of door.
For white, bisque, and black models, use aT-15 Torx®'head
driver.
For stainless steel models, use a Phillips screwdriver.
Retain allscrews for later use.
Ia evo'se handle by removing two T-15 1
Torx head so'ews from top and
bottom edge of handle and reattaching
handle on opposite side of dorm.
1nstall top door trim on bottom side °f
doo_ and bottom trim on _ side of do_:
• Locate hinge hole corner oftrim. Instal_hinge hole comer of trim
on hinge side first,then installhandle edge of _im.
and Hinges.
f 4 Remove bottom door trim by removing 4 "_
] Phelps so'ews.
J
L • Lift handle comer of trim and slide toward hinge edge of door.
How to Replace the Door and Hinges
I1 Install hinge assemblies. 1
Install center hinge with Phillips screws.
Install stabilizing bracket with 3/8"hex head screws.
I3 lace hinge side of refrigerator dooron center hinge pin.
While holding refrigerator I 1,
door upright, tighten down top_ _]
•
hinge with U_6"hex head drtve_
Replace hinge cover. II_J
*Torx® is a registered trademark of Textron, Inc.
6
Installing Your Refrigerator
How to Remove and Install the Pullout Drawer
WARNING
To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before
removing doors. After replacing doors, connect power.
CAUTION
To avoid possible injury, product, or property damage, you will need two people to perform the following instructions.
Removing Pullout Drawer
full extension. Remove
Phillips screw from
each Side of rail
system.
Installing Pullout Drawer
m
Pull upper basket out
to full extension, and
lift out to remove.
"_ With drawer pulled out to I\
_full extension, insert lower __
basket by aligning tabs on
both side of lower basket ,,_,"_
with notches in raa assembly. F
I4 lide upper basket into ___[___
unit. Make sure that
rear of basket hooks l___/]
behind rail catch. __J7
Installing Your Refrigerator
How to Connect the Water Supply
WARNING
To reduce the risk of injury or death, follow basic precautions, including the following:
• Read all instructions before installing device.
• DO NOT attempt installation if instructions are not understood or if they are beyond personal skill level.
• Observe all local codes and ordinances.
• DO NOT service device unless specifically recommended in owner's manual or published user-repair
instructions.
• Disconnect power to unit prior to installing device.
CAUTION
To avoid property damage or possible injury, follow basic precautions, including the
following;
• Consult a plumber to connect copper tubing to household plumbing to assure compliance with local codes and
ordinances.
• Confirm water pressure to water valve is between 20 and 100 pounds per square inch. If water filter is installed,
water pressure to water valve must be a minimum of 35 pounds per square inch.
• DO NOT use a self-piercing, or 3/16"saddle valve! Both reduce water flow, become clogged with time, and
may cause leaks if repair is attempted.
• Tighten nuts by hand to prevent cross threading. Finish tightening nuts with pliers and wrenches. Do not
overtighten.
• Wait 24 hours before placing unit into final position to check and correct any water leaks.
Materials Needed
1/4"outer diameter flexible copper tubing
NOTE: Add 8' to tubing length needed
to reach water supply for creation of
service loop.
• Shut-off valve (requires a 1/4" hole to
be drilled into water supply before
valve attachment)
• Adjustable wrench
114"hex nut driver
Create service loop with _ [ _ Slide brass nut over sleeve
l tubing using care to avoid _ J and screw nut into inletport.
kinksintubing. _0 _ [ Tightennutwithwrench. 1
.;j IMpoRtANt:DONOTove,ighten.
Cross threading may occur.
"I
_. Remove plastic cap from c'_
re'water valve inlet port. 6
I3 Place brass nut (A) and A\ B
sleeve (B) on copper _ _LX I
tube end as illustrate ' .J
"x
Place end
of
copper tubing into_ _ _-\_ hours. Correct leaks, if necessary. J
4 watervalveinletport. Shape _]ll I 7M°nit°rwaterc°nnecti°nf°r24
tubing slightly-OO NOT KINK- HI
so that tubing feeds straight _ll l
into inlet port. _ _J
Installing Your Refrigerator
How to Level Your Refrigerator
If your refrigerator requires an ice maker water supply connection, proceed to water supply section before leveling your refrigerator.
CAUTION
To protect personal property or unit from damage, observe the following:
• Protect soft vinyl or other flooring with cardboard, rugs, or other protective material.
• Do not use power tools when performing leveling procedure•
MateJqalsNeeded • 3/8" hex head driver • Level
1 Move refrigerator to final location 1
and plug in power cord.
Remove toe grille
and bottom cover(s5
Turn left and right adjustment
screws (A) to raise or lower A
• Make sure refrigerator cabinet islevel
from side to side by adjusting left and
rightrolleradjustment screws.
_oor.
usinga level make sure front of !
refrigerator is 1/4"(6 ram) or 1/2 bubble
higher than back of refrigerator.
, • See leveling step 3 for assistance•
_Replace toe grille and bracket
.J cover(s). See markings on inside of
grille to insure proper placement. Z
toe
• Snap bottom portion into place first• Press
down on top part of grille until top portion snaps
into place.
How to Adjust the Temperature Controls
This refrigerator is designed to operate at a household temperature of 55 ° to 110°F (13 ° to 43 ° C). For initial temperature
setting, follow all five steps listed below. If doing a simple temperature modification for an operational unit, only steps 3
through 5 are required.
1 Locate refrigerator controls at the top of refrigerator ] How do I perform
compartment and freezer controls at top or freezer | a temperature test?
section. Set both controls to 31/2. IMPORTANT: Neither sectionwill | Materials needed
cool if freezer control is set to Off.) . 2 thermometers measuring -5 °
(2 ) to 50°F (-21° to 10°C)
Allow 24 hours for temperatures to stabilize. • 2 drinking glasses
For Freezer
I3 Check tO see if freezer temperature is O° to 2° F (-17° to -16° C)._ " Place thermometer in glass of
Turn control to next highest number iftoo warm. _._,_-,_'"_ '-___ | andVegetablecontinue°ilinwithmiddlestepOffreezer3of
H
• Turn control to next lowest number if too cold Allow 5 Ii_J_?dl |
to 8 hours for adjustments to take effect. ) temperature adjustment section.
f_- ('_t IMPORTANT: Always start temperatureChecktoseethatre___eratorse_tionis38°to40°F___O4°fri2(3 °t adjustments with freezer section.
J., Turn control to next highest number if too warm. _ |
• Turn control to next lowest number if too cold• _.__-- | For Refrigerator
_,, • Allow 5 to 8 hours for adjustments to take effect. _ ,J • Place thermometer in glass of
water in middle of unit and
r _ Repeat steps 3 & 4, as necessary. _ continue with step 3 of
%1 )
temperature adjustment section.
9
About Your Water Filter...
Water Filter Removal and Installation
WARNING
To avoid serious illness or death, do not use unit where water is unsafe or of unknown quality without adequate
disinfection before or after use of filter.
CAUTION
• Bypass cartridge DOES NOT filter water. Be sure to have replacement cartridge available when filter change is required.
• If water filtration system has been allowed to freeze, replace filter cartridge.
• If system has not been used for several months, and water has an unpleasant taste or odor, flush system by dispensing
2-3 glasses of water. If unpleasant taste or odor persists, change filter cartridge.
When do I change the
water filter?
The average replacement time for
filter replacement is 3 months.
IMPORTANT: Condition of water
and amount used determines life
span of water filter cartridge. If
water use is high, or if water is of
poor quality, replacement may need
to take place more often.
How do I order a
replacement filter
cartridge?
Kenmore ° replacement water filter
cartridge model 9005 is available
through Sears dealers and servicers.
You may also order through Sears by
using the information on the back cover.
Initial Install of Water Filter
Remove sealing label from
end of filter and inser__ --]
into filter head. _._ _ ]
• Rotate gently clockwise until filter _'_ 1! ]
stops, and snap filter cover closed. _ \ )
Reduce water spurts by flushing air
from system. Run water continuously
for 2 minutes through dispenser until
water runs steady.
• Additional flushing may be required in some
_, households where water is of poor quality.
#
I'm trying to dispense
water to flush the ,
system. Where's
the water?
During initial use, allow about a 1 to 2
minute delay in water dispersal to allow
internal water tank to fill.
What if I choose not to
use the water filtration
system?
Dispenser feature may be used without
water filter cartridge. If you choose this
option, replace filter with blue bypass cap.
Replacing Water Filter
IMPORTANT: Air trapped in system may cause water and
cartridge to eject. Use caution when removing.
I1 urn filter counterclockwise until it
releases from filter head.
I2 Drain water from filter into sink, and
1
dispose in normal household garbage. ]
J
I3 Wipe up excess water in filter cover 1
and continue with Initial Install of
Water Filter, steps 2 and 3.
] 0
Refrigerator Features
Primary Features
Water Dispenser 4__
A water dispenser is located on the left side
wall of the refrigerator section. This design is for
cold water dispensing only. A water sump has
been designed below the dispenser to catch
drips and minor spills.
To dispense water:
• Hold container under spout and press dispenser pad, as
illustrated.
What are the cleaning instructions
for the water sump?
The sump has been designed for easy-access cleaning. The sump
is built into the floor of the refrigerator section. Spills can be wiped up
with a towel.
It may be required to clean the sump to remove water or mineral
deposits. Sumps may be washed with soap and water.
IMPORTANT: The sump does not contain a drain. Spills
must be wiped up occasionally to remove water.
===
Interior Shelves
CAUTION
To avoid personal injury or property damage, observe the
following:
• Confirm shelf is secure before placing items on shelf.
• Handle tempered glass shelves carefully. Shelves may
break suddenly if nicked, scratched, or exposed to
sudden temperature change.
Spillproof Shelves
Spillproof stationary shelves hold
simple spills for easier cleaning.
To remove shelves, lift up and out.
To install shelves, reverse above
procedure.
Spillproof Slide-Out
Spillproof slide-out shelves feature the
convenience of easy cleaning with a
pullout design to reach items in
the back. For ease of cleaning,
glass shelf may be removed
by pulling to full extension and
lifting out of frame.
Door Storage
r
Dairy Center
The dairy center provides convenient
storage for items such as butter,
yogurt, cheese, etc. This compartment
is an adjustable feature located in the
door. It can be moved to several
different locations to accommodate storage needs.
To remove, open dairy door, pull upward and tilt out.
• To install, reverse above procedure.
Door Buckets _oh
Door buckets adjust to meet individual storage ,.__needs_
To remove, slide bucket up and pull
straight out. _L__ _-_'_-_
• To install, reverse above procedure. ! _,:.
Door Retainer
(some models)
Door retainers remove for easy cleaning.
• To remove, slide retainer up and pull
straight out.
• To install, reverse above procedure.
O
m
Accessories
r
Covered Storage Bucket
Storage bucket has a lid and removable
egg tray. When tray is removed, bucket
will accept items such as a standard egg
carton, ice, etc.
]]
Refrigerator Features
How do I remove the glass
and crisper frame ifI want to
clean it?
• Removethe drawersas instructedatle&
• Placehandbeneathframe
topush upglass from _ J
underneath. _
Li_glass out. _,/J
• Liftframefrom
refrigeratorlinerrails.
• Toinstall,repeatabove
instructionsin reverseorder.
What can I do to prolong
the life of my produce?
Pleaseobservethefollowingruleswhen storing
produceinhumidity-controlledcrisperdrawers:
• DONOTwash producebeforeplacingin
crispers.Any additionalmoistureaddedto
thedrawers may cause produceto
prematurelysboil.
• DONOTline crisperswith papertowels.
Towelswillretainmoisture.
• Followcontrolinstructionscarefully.Not
settingcontrolscorrectly may damage
produce.
See chart below for assistance with
humidity drawer controls:
Climate-Controlled Drawers
Humidity-Controlled Crisper Drawers
The crisper drawer keeps produce fresh longer by
providing an environment with adjustable humidity.
Controls
The crisper controls regulate the amount
of humidity in the crisper drawer. Use the
low setting for produce with outer skins.
Use the high setting for leafy produce.
To remove and install crisper drawers:
To remove drawer, pull drawer out to full
extension. Tilt up front of drawer and pull
straight out.
To install, insert drawer into frame rails
and push back into place.
Storage Drawer
This drawer can be used for large party
trays, dell items, or beverages.
To remove and install drawers:
To remove drawer, pull drawer
out to full extension. Tilt up front
of drawer and pull straight out.
To install, insert drawer into
frame rails and push back into
place.
LOW
HIGH
• cauliflower • zucchini
• apples • grapes
•com • cucumbers
• oranges
• lettuce • celery
• asparagus • broccoli
• spinach • fresh sprouts
• cabbage • fresh herbs
]2
Primary Features
Automatic Ice Maker
CAUTION
To avoid property damage, observe the following:
• Do not force ice maker arm down or up.
• Do not place or store anything in ice storage bin.
Using Ice Maker for the First Time_
• Confirm ice bin is in place and ice
maker arm is down. |
/
• After freezer section reaches |
between 0° to 2°F (-18°to -17 ° C), ice C
maker fills with water and begins operating.
• Allow approximately 24 hours after installation to receive
first harvest of ice.
Discard ice created within first 12 hours of operation to
verify system is flushed of impurities.
Operating Instructions
Confirm ice bin is in place and ice maker arm is down.
After freezer section reaches 0° to 2°F (-18 ° to -17 ° C), ice
maker fills with water and begins operating. You will have
a complete harvest of ice approximately every 3 hours.
Freezer Features
m
Drawers
r Pullout Drawer Baskets
(Door assembly of drawer removed from illustration for
visual clarity)
To remove and replace top basket:
Remove basket by pulling
basket out to its full extension
and lift out.
Replace basket by
sliding into upper
molded railing.
To remove and replace bottom
basket:
Remove basket by lifting basket from rail guides.
Replace basket by placing into rail guides.
DANGER
To prevent accidental child entrapment or suffocation risk
DO NOT remove the divider in the top freezer basket.
]3
@ o@
Hints and Care
How do I remove
an odor from my _
refrigerator?
.Removea,food.
2. Disconnect refrigerator.
3. Clean the following items
using the appropriate instructions in
"How to Clean Your Unit" :
• Walls, floor, and ceiling of
cabinet interior.
• Drawers, shelves, and gaskets
according to the instructions in
this section.
4. Pay special attention to all crevices
by completing the following steps:
• Dilute mild detergent and brush
solution into crevices using a
plastic bristle brush.
• Let stand for 5 minutes.
• Rinse surfaces with warm
water. Dry surfaces with a soft,
clean cloth.
5. Wash and dry all bottles,
containers, and jars. Discard
spoiled or expired items.
6. Wrap or store odor-causing foods in
tightly-sealed containers to prevent
reoccurring odors.
7. Connect power to refrigerator and
return food to unit.
8. After 24 hours, check if odor has
been eliminated.
If odor is still present...
1. Remove drawers and place on top
shelf of refrigerator.
2. Pack refrigerator and freezer
sections-including doors-with
crumpled sheets of black and white
newspaper.
3. Place charcoal briquettes randomly
on crumpled newspaper in both
freezer and refrigerator
compartments.
4. Close doors and let stand 24-48
hours.
5. Repeat steps 5 through 7.
If odor was not eliminated, contact
Sears Service Center. Refer to back of
manual for phone number.
How to Clean Your Unit
I A WARNING ]
To avoid electrical shock which can cause severe personal injury or death,
disconnect power to refrigerator before cleaning. After cleaning, connect power.
I CAUTION ]
To avoid personal injuryor property damage:
• Read and follow manufacturer's directionsfor allcleaning products
• Do not place buckets, shelves, or accessories in dishwasher Cracking or
warping of accessories may result
_d{FA
Textured Doors
and Exterior
Cabinet Interior
Stainless Steel Doors
and Exterior*
IMPORTANq2
Damage to stainless steel
finish due to improper use
of cleaning products or
non-recommended
products is not covered
under warranty
Dispenser Controls
Door Gaskets
Condenser Coil
Remove toe gritle to
access
Condenser Fan Outlet
Grille
See back of refrigerator
Accessories
Shelves, buckets,
drawers, etc
DO NOT USE
• Abrasive or harsh cleaners
• Ammonia
• Concentrated detergents or
solvents
• Metal or plastic-textured
scouring pads
• Abrasive or harsh cleaners
• Ammonia
• Chlorine bleach
• Concentrated detergents or
sotvents
• Metal or pIastic-textured
scouring pads
• Vinegar-based product
• Citrus-based product
• Abrasive or harsh cleaners
• Ammonia
• Chlorine bleach
• Concentrated detergents or
solvents
• Metat or plastic-textured
scouring pads
• Abrasive or harsh cleaners
• Metat or plastic-textured
scouring pads
N/A
• A dishwasher
Ol_...
• Use 4 tablespoons (60 miIliliters)
dissolved in 1 quart (1 liter)
warm soapy water
• Rinse surfaces with clean warm
water and dry immediately to
avoid water spots.
• Use warm, soapy water
and a soft, clean cloth or
sponge.
• Rinse surfaces with clean
warm water and dry
immediately to avoid
water spots
• Use a vacuum cleaner
hose nozzle.
• Use a vacuum cleaner
hose nozzle with brush
attachment
• Fottow removal and installation
instructions from appropriate
feature section.
• AIIow items to adjust to room
temperature.
• Dilute mild detergent and use
a soft clean cloth or sponge for
cleaning
• Use a plastic bristle brush to
get into crevices
• Rinse surfaces with clean,
warm water.
• Dry glass and clear items
immediately to avoid spots
* A stainless steel cleaner has been included inside the refrigerator for your use. To purchase
additional cleaner, please contact Sears using the information on the back of your manual
]4
Hints and Care
How to Remove and Replace Light Bulb .....
-_ How to Get the
] _/Most Out of
Your Energy
Dollar
[ ark WARNING
To avoid electrical shock which can cause severe personal injury or death,
disconnect power to refrigerator before replacing light bulb. After replacing light
bulb, connect power.
[ CAUTION
To avoid personal injury or property damage, observe the following:
• Allow light bulb to cool.
• Wear gloves when replacing light bulb.
• When placing refrigerator into final
position, allow for 1"clearancearound the top and sides of unit
to supply ample ventilation for
mmm
optimum energy efficiency.
• Avoid overcrowding refrigerator
shelves. This reduces effectivity of
air circulation around food and
causes refrigerator to run longer.
• Avoid adding too much warm food _1_
to unit at one time. This overloads _11
compartments and slows rate of
cooling.
• Do not use aluminum foil, wax
paper, or paper toweling as shelf
liners. This decreases air flow and
causes unit to run less efficiently.
• A freezer that is 2/3full runs most
efficiently.
Freezer section
1. Pinch rear tabs (,4) on light cover and pull
straight out.
2. Remove light bulb.
3. Replace bulb with appliance bulb no greater
than 40 watts.
4. insert top tabs (B) of light cover into refrigerator
liner and snap back portion over light assembly.
A
B
Locate refrigerator in coolest part
of room. Avoid areas of direct
sunlight, or near heating ducts,
registers, or other heat producing
appliances. If this is not possible,
isolate exterior by using a section
of cabinet or an added layer of
insulation.
Refer to use and care guide
section on temperature controls
for recommended control
settings.
Clean door gaskets every three
months according to use and
care guide instructions. This will
assure that door seals properly
and unit runs efficiently.
• Take time to organize items in
refrigerator to reduce time that
door is open.
Be sure your doors are closing
securely by leveling unit as
instructed in your owner's
manual.
]5
Clean condenser coils off as
indicated in the use and care
guide every 3 months. This will
increase energy efficiency and
cooling performance.
Trouble Shooting
Today's refrigerators have new features and are more energy efficient. Foam insulation is very energy
efficient and has excellent insulating capabilities, however, foam insulation is not as sound absorbent.
As a result, certain sounds may be unfamiliar. In time, these sounds will become familiar. Please refer to
this information before calling service.
Noise
TOPIC POSSIBLE CAUSE SOLUTION
Clicking
Air rushing or
whirrin9
Gurgling or
boiling sound
ping
Vibrating noise
Freezer control (A) clicks when starting or Normal operation
stopping compressor.
Defrost timer (B) sounds like an electric Normal operation
clock and snaps in and out of defrost
Hissing or
popping
Freezer fan (C) and condenser fan (D)
make this noise whiie c
Evaporator (E) and heat exchanger (F)
refrigerant makes this noise when flowing.
Ice cubes from ice maker (some models)
drop into ice bucket
Compressor (H) makes a pulsating sound
while running.
Refrigerator is not level.
Buzzing Ice maker water valve (I) hookup (some
models) buzzes when ice maker fills with
water.
Humming Ice maker (J) is in the 'on' position
without water connection.
Compressor (H) can make a high-pitched
hum while operating.
Normal operationDefrost heater (K) hisses, sizzles or pops
when operational.
Normal operation
Normal operation
Normal operation
Normal operation
See "Installing Your
Refrigerator" for details on
how to level your unit.
Normal operation
Stop sound by raising ice
maker arm to 'off' position.
See "Automatic Ice Maker"
selection for details.
Normal operation
OPERATION
Freezer control Refrigerator is in defrost mode. Normal operation. Wait 40 minutes to see if refrigerator restarts.
and lights are on
but compressor
is not operating
Crisper drawer Drawer control settings are too low.
temperature is
too warm Freezer controls are set too Iow.
Drawer is improperly positioned.
Refrigeratordoe.,
not operate
Refrigerator still
won't operate
Food temperatur_
is too cold
Refrigerator is not plugged in.
Freezer controi is not on.
Fuse is blown, or circuit breaker needs
to be reset.
Power outage has occurred.
Unit is malfunctioning.
Condenser coils are dirty.
Refrigerator or freezer controls are set
too high.
See section on "Refrigerator Features-Humidity-Controlled Crisper
Drawers" to adjust controls.
See "Installing Your Refrigerator-How to Adjust the
Temperature Controls" section on how to adjust your
controls.
See section on "Refrigerator Features-Humidity- Controlled Crisper
Drawers" to verify drawer positioning.
Plug in unit.
See section on "Refrigerator Features-Humidity-Controlled Crisper
Drawers" to adjust controls.
Replace any blown fuses. Check circuit breaker and reset, if.
necessary.
Call local power company listing to report outage.
Unplug refrigerator and transfer food to another unit. If another
unit is not available, place dry ice in freezer section to preserve
food. Warranty does not cover food loss.
Contact service for assistance.
See section on "Hints and Care - How to Clean Your Unit"
for instructions.
See section on "Refrigerator Features-Humidity-Controlled Crisper
Drawers" to adjust controls.
]6
OPERATION
TOPIC
Trouble Shooting
POSSIBLE CAUSE SOLUTION
Food temperature
appears too warm
Refrigerator has an odor
Water droplets form on
outside of refrigerator
Water droplets form on
inside of refrigerator
Door is not closing properly.
Controls need to be adjusted.
Condenser coils are dirty.
Rear air grille is blocked.
Door has been opened frequently, or
has been opened for long periods
Food has recently been added.
Compartment is dirty or has odor-
causing food.
Check gaskets for proper seal.
Humidity levels are high.
Controls require adjustment.
Humidity levels are high or door
been opened frequently.
Check gaskets for proper seal.
See "installing Your Refrigerator-How to Level Your
Refrigerator" section on how to properly level unit.
Check gaskets for proper seal. Clean, if necessary, according to
cleaning instructions.
Check for internal obstructions that are keeping door from closing
properly (i.e. improperly closed drawers, ice buckets, oversized
or improperly stored containers or foodstuffs, etc.)
See "Installing Your Refrigerator-How to Adjust the
Temperature Controls" section on hew to adjust your controls.
See section on "Hints and Care-How to Clean Your Unit" for
instructions.
Check the positioning of food items in refrigerator to make sure
grille is not blocked. Rear air grilles are located under crisper
drawers.
Reduce time door is open. Organize food items efficiently to
assure door is open for as short a time as possible.
Allow interior environment to adjust for period the door has been
open.
Allow time for recently added food to reach refrigerator or freezer
temperature.
See section on "Hints and Care" for instructions.
See section on "Hints and Care-How to Clean Your Unit" for
instructions.
See "Installing Your Refrigerator-How to Adjust the
Temperature Controls" section on how to adjust your controls.
See "Installing Your Refrigerator-How to Adjust the
Temperature Controls" section on how to adjust your controls.
See "lnstaliating Your Refrigerator-How to Adjust the
Temperature Controls" section on how to adjust your controls.
Reduce time door is open. Organize food items efficiently to
assure door is open for as short a time as possible.
See section on "Hints and Care-How to Clean Your Unit" for
instructions.
Refer to noise section of troubleshooting guide.Refrigerator or ice maker Normal operation.
make unfamiliar sounds or
seems too loud
Crisper drawers do not Contents of drawer, or positioning of Reposition food items and containers to avoid interference with
close freely items in the surrounding compartment the drawers.
could be obstructing drawer.
Drawer is not in proper position.
Refrigerator is net level.
Drawer channels are dirty or need
treatment.
Doors havebeen opened frequently or
have been openedfor long periods of
time.
Humidity or heat in surrounding area
is high.
Food has recently been added.
Refrigerator runs too
frequently
Unit is exposed to heat by
environment or by appliances nearby.
Condenser coils are dirty.
See section on "Refrigerator Features-Humidity-Controlled Crisper
Drawers to verify drawer positioning.
See "Installing Your Refrigerator-How to Level Your
Refrigerator" section on how to properly level unit.
Clean drawer channels with warm, soapy water. Rinse and dry
thoroughly.
Apply a thin layer ot petroleum jelly to drawer channels.
Reduce time door is open. Organize food items efficiently to
assure door is open for asshort atime as possible.
Allow interiorenvironment to adjust for periodthe door has
been open.
Normal operation.
Allow time for recently-added food to reach refrigerator or
freezer temperature.
Evaluate your unit's environment. Unit may need to be moved to
run more efficiently.
See section on "Hints and Care-How to Clean Your Unit" for
instructions.
]7
m
Trouble Shooting
OPERATION (continued)
POSSIBLE CAUSETOPIC
Refrigeratorrunstoo
SOLUTION
Controls need to be adjusted.
Door is not closing properly.
See "Installing Your Refrigerator-How toAdjust the
Temperature Controls" section on how to adjust your controls.
See "Installing Your Refrigerator-How to Level Your
Refrigerator" section on how to properly level unit.
Check gaskets for proper seal. Clean, if necessary. See
section on "Hints and Care-How to Clean Your Unit" for
instructions.
Check for internal obstructions that are keeping door from
closing properly (i.e.improperly closed drawers, ice buckets,
oversized or improperly stored containers or foodstuffs, etc.)
ICE
Unit is leaking water
Ice forms in inlettube to ice
maker
Water flow is slower than
Plastic tubing was used to complete water
connection.
Improper water valve was installed.
Water pressure is low.
Freezer temperature is too high.
Water pressure is low.
Improper water valve was installed.
Sears recommends using copper tubing for installation.
Plastic is less durable and can cause leakage. Sears is
not responsible for property damage due to improper
installation or water connection.
See section on "Installing Your Refrigerator-How to
Connect the Water Supply" for Instructions. Self-piercing and
3A6"saddle valves cause low water pressure and may clog the
line over time. Sears is not responsible for property
damage due to improper installation or water connection.
Water pressure must be between 20 to 100 pounds per
square inch to function properly.A minimum pressure of 35
pounds per square inch is recommended for units with water
filters.
See "Installing Your Refrigerator-How to Adjust the
Temperature Controls" section on howto adjust your controls.
Freezer is recommended to be between Oto 2°F
(-18 to-17 o C).
Water pressure must be between 20 to 100 pounds per
square inch to function properly.A minimum pressure of 35
pounds per square inch is recommended for units with water
filters.
See section on "Installing Your Refrigerator-How to
Connect the Water Supply" for instructions. Self-piercing and
3A6"saddle valves cause low water pressure and may clog the
line over time. Sears is not responsible for property
damage due to improper installation or water connection.
]8
Water Filter Data
System Specification and Performance Data Sheet
® Refrigerator Water Filter Cartridge Model 9005
I Specifications
Service Flow Rate (Maximum) ............................................. 075 GPM (2.83 L/min)
Rated Service Life Model 9005 (Maximum) ......................... 500 gallons/ 1892 liters
Maximum Operating Temperature ........................................ 100 ° F/38 ° C
Minimum Pressure Requirement .......................................... 35 psi/ 138 kPa
Maximum Operating Pressure .............................................. 120 psi/827 kPa
General Use Conditions: Read this Performance Data Sheet and compare the capabilities of this unit with your actual
water treatment needs.
The retractable water filtration system uses a 9005 replacement cartridge (see Sears contact information at the front of your
manual to order). Timely replacement of filter cartridge is essential for performance satisfaction from this filtration system.
Please refer to the applicable section in this Use and Care Guide for general operation, maintenance requirements and
troubleshooting.
This system has been tested according to ANSA1/NSF 42 and 53 for reduction of the substances listed below.
The concentration of the indicated substances in water entering the system was reduced to a concentration less
than or equal to the permissible limit for water leaving the system, as specified in ANSI/NSF 42 and 53.
Performance Data*
Influent Challenge Effluent Average % Maximum Min. Required Inlet
Substance Concentration Average Reduction Effluent Reduction pH
Lead 0.15 mg/L +/- 10% 0.001 mg/L 99.33% 0.001 mg/L 0.010 mgiL 6.5
Lead 0.15 mg/L +/- 10% 0.002 mg/L 98.66% 0.003 mg/L 0.010 mglL 8.5
Cyst Minimum 50,000/L lcount/mL 99.99% 3 count/mL >99.95% NA
Turbidity 11+/-1 NTU 0.12 NTU 98.98% 0.18NTU 0.5 NTU NA
Lindane 0.002 mg/L +/- 10% 0.00005 mg/L 92.06% 0.00005 mg/L 0.00002 mg/L NA
Atrazine 0.009 mg/L +/- 10% 0.0002 mg/L 97.93% 0.0006 mg/L 0.003 mg/L NA
Chlorine 2.0 mg/L +/- 10% 0.09 mg/L 95.26% 0.17 mg/L _>75% NA
Particulate** at least 10,000 900 count/mL 99.68% 2400 count/mL _>85% NA
particles/mL
2,4-D 0.210 mg/L +/- 10% 45.45 ug/L 84.42% 100 ug/L 0.0017 mg/L NA
Asbestos 107tol08 fibers/L;fibersgreater 0.16 MFL/mL 99.96% 0.16 MFL/mL 99% NA
than10micometersin length
Tested usin( a flow rate of 0.75 GPM (2.83 L/min.) and a maximum pressure of 120 psi (827 kPa) under standard
laboratory conditions, however, actual performance may vary. Health Claim Performance tested and certified by NSF
international
** Particle size range classification of test. Particles used were 0.5-1 microns.
Pentapure, Incorporated
1000 Apollo Road
Eagan, Minnesota U.S.A.
EPA EST #35917-MN-1
Tested and Certified by NSF International against ANSI/NSF Standards
42 & 53 in models WF50-KNI300 and WF50-KWI 500 for the reduction of.
StandardNo. 42 Aesthetic Effects
Taste& Odor Reduction
Chlorine Reduction
Mechanical Filtration Unit
Particlate Reduction Class 1
Standard No. 53: Health Effects
Chemical Reduction Unit
Lead,A_azine,L#_dane& 2,4-DReductiorl
Mechanical Filtration Unit
Cyst, Turbidity,&Asbestos Reduction
]9
DO NOT use this product where water is microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system. System certified for cyst reduction may be used on disinfected water that may contain
filterable cysts.
USE ONLY WITH COLD WATER SUPPLY. CHECK FOR COMPLIANCE WITH THE STATE AND LOCAL LAWS AND REGULATIONS.
State of California
Department of Health Services
Water Treatment Device
Certificate Number
01-1486
Date Issued: September 21, 2001
Date Revised: March 20, 2002
Trademark/Model Designation Replacement Elements Rated Capacity
WF50-W1500 WF50 500 gal
WF50-NI300 WF50 300 gal
WF50-KWI500 46 9005 500 gal
WF50-KNI300 46 9005 300 gal
OWF50-WI500 OWF51 500 gal
OWF50-NI300 OWF51 300 gal
Manufacturer: PentaPure Incorporated
The water treatment device(s) listed on this certificate have met the testing requirements pursuant to Section
116830 of the Health and Safety Code for the following health related contaminants:
Microbiological Contaminants and Turbidity
Cysts
norqanic/Radioloqical Contaminants
Asbestos
Lead
Organic Contaminants
Atrazine
Lindane
Rated Service Flow: 0.75
2O
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
