Hotpoint FI4 854 P IX HA User guide

Brand: Hotpoint

Model: FI4 854 P IX HA

Category: Ovens

Type: User guide

This manual is also suitable for

FI5 854 P IX HA

PRODUCT DESCRIPTION

CONTROL PANEL

1. Control panel

2. Fan

3. Circular heating element

(not visible)

4. Shelf guides

(the level is indicated on the front

of the oven)

5. Door

6. Upper heating element/grill

7. Lamp

8. Turnspit insert point

Identification plate

(do not remove)

10. Lower heating element

(not visible)

1. LEFTHAND DISPLAY

2. ON / OFF

For switching the oven on and off

and for stopping an active function

at any time.

3. BACK

For returning to the previous menu

when configuring settings.

4. TEMPERATURE

For setting the temperature.

5. KNOB

For selecting menu items and

changing or adjusting the settings

of a function.

6. START

For starting functions and

confirming settings.

7. T I M E

For setting or changing the time

and adjusting the cooking time.

8. CONFIRM

For confirming an item you have

selected or the settings for a

function.

9. RIGHTHAND DISPLAY

DAILY REFERENCE

GUIDE

Before using the appliance carefully read the Health and Safety guide.

THANK YOU FOR PURCHASING AN

HOTPOINT-ARISTON PRODUCT

To receive more comprehensive help and

support, please register your product at

www.hotpoint.eu/register

WWW

You can download the Safety Instructions

and the Use and Care Guide by visiting our

website docs.hotpoint.eu and following

the instructions on the back of this booklet.

1 2 5 6 93 4 7 8

ACCESSORIES

Download the Use and Care Guide from

docs.hotpoint.eu for more information

WWW

WIRE SHELF DRIP TRAY BAKING TRAY TURNSPIT

The number of accessories may vary depending on which

model is purchased.

Other accessories can be purchased

separately from the After-sales Service.

INSERTING THE WIRE SHELF AND OTHER

ACCESSORIES

Insert the wire shelf horizontally by sliding it across

the shelf guides, making sure that the side with the

raised edge is facing upwards.

Other accessories, such as the drip tray and the

baking tray, are inserted horizontally in the same way

as the wire shelf.

USING THE TURNSPIT

Push the skewer through the

centre of the meat (bound

with string if poultry) and

slide the meat onto the

skewer until it is positioned

firmly on the fork and

cannot move. Push the

second fork onto the skewer

and slide it on until it holds

the meat firmly in place.

Tighten the fixing screw to secure it in position.

Insert the end into

the recess provided

in the oven’s cooking

compartment and rest

the rounded part on the

relevant support.

Please note: To collect the

cooking juices, position the

drip tray below and add 500

ml of drinking water. To avoid

burning yourself when the skewer is hot, only handle it by

the plastic handle (which must be removed before cooking).

REMOVING AND REFITTING THE SHELF GUIDES

. To remove the shelf guides, lift the guides up and

then gently pull the lower part out of its seating: The

shelf guides can now be removed.

. To refit the shelf guides, first fit them back into

their upper seating. Keeping them held up, slide them

into the cooking compartment, then lower them into

position in the lower seating.

CONVENTIONAL

For cooking any kind of dish on one shelf only.

GRILL

For grilling steaks, kebabs and sausages,

cooking vegetables au gratin or toasting bread. When

grilling meat, we recommend using a drip tray to

collect the cooking juices: Position the tray on any

of the levels below the wire shelf and add 500 ml of

drinking water.

FORCED AIR

For cooking different foods that require the

same cooking temperature on several shelves

(maximum three) at the same time. This function

can be used to cook different foods without odours

being transferred from one food to another.

CONVECTION BAKE

For cooking meat, baking cakes with fillings or

roasting stuffed vegetables on one shelf only. This

function uses gentle, intermittent air circulation to

prevent food from drying out excessively.

AUTOMATIC FUNCTIONS

CASSEROLE

This function automatically selects the best

temperature and cooking method for pasta dishes.

MEAT

This function automatically selects the best

temperature and cooking method for meat. This

function intermittently activates the fan at low speed

to prevent the food from drying out too much.

MAXI COOKING

The function automatically selects the best

cooking mode and temperature to cook large joints

of meat (above 2.5 kg). It is advisable to turn the

meat over during cooking, to obtain even browning

on both sides. It is best to baste the meat every now

and again to prevent it from drying out.

BREAD

This function automatically selects the best

temperature and cooking method for all types of

bread.

PIZZA

This function automatically selects the best

temperature and cooking method for all types of

pizza.

PASTRY CAKES

This function automatically selects the best

temperature and cooking method for all types of

cake.

SPECIAL FUNCTIONS

FAST PREHEATING

For preheating the oven quickly. Once

preheating has finished, the oven will select the

“Conventional” function automatically. Wait for

preheating to finish before placing food in the oven.

TURBO GRILL

For roasting large joints of meat (legs, roast

beef, chicken). We recommend using a drip tray to

collect the cooking juices: Position the pan on any

of the levels below the wire shelf and add 500 ml of

drinking water. The turnspit (if provided) can be used

with this function.

ECO FORCED AIR*

For cooking stuffed roasting joints and fillets

of meat on a single shelf. Food is prevented from

drying out excessively by gentle, intermittent air

circulation. When this ECO function is in use, the

light will remain switched off during cooking. To

use the ECO cycle and therefore optimise power

consumption, the oven door should not be opened

until the food is completely cooked.

KEEP WARM

For keeping just-cooked food hot and crisp.

RISING

For optimal proving of sweet or savoury

dough. To maintain the quality of proving, do not

activate the function if the oven is still hot following

a cooking cycle.

AUTOMATIC CLEANING - PYRO

For eliminating cooking spatters using a cycle

at very high temperature (approx. 500 °C). Two

selfcleaning cycles are available: A complete cycle

(PYRO) and a shorter cycle (ECO). We recommend

using the quicker cycle at regular intervals and the

complete cycle only when the oven is heavily soiled.

FUNCTIONS

Download the Use and Care Guide from

docs.hotpoint.eu for more information

WWW

* Function used as reference for the energy eciency

declaration in accordance with Regulation (EU) No. 65/2014

USING THE APPLIANCE FOR THE FIRST TIME

1. SET THE TIME

You will need to set the time when you switch on the

oven for the first time.

The two digits for the hour will start flashing: Turn the

knob to set the hour and press

to confirm.

The two digits for the minutes will start flashing. Turn

the knob to set the minutes and press

to confirm.

Please note: To change the time at a later point, press and

hold for at least one second while the oven is o and

repeat the steps above.

You may need to set the time again following lengthy power

outages.

2. SETTINGS

If required, you can change the default unit of

measurement, temperature (°C) and rated current

(16A).

With the oven off, press and hold

for at least 5

seconds.

Turn the selection knob to select the unit of

measurement, then press

to confirm.

Turn the selection knob to select the rated current,

then press

to confirm.

Please note: The oven is programmed to consume a level of

electrical power that is compatible with a domestic network

that has a rating of more than 3 kW (16 A): If your household

uses a lower power, you will need to decrease this value

(13A).

3. HEAT THE OVEN

A new oven may release odours that have been left

behind during manufacturing: this is completely

normal.

Before starting to cook food, we therefore

recommend heating the oven with it empty in order

to remove any possible odours.

Remove any protective cardboard or transparent film

from the oven and remove any accessories from inside

it.

Heat the oven to 200 °C for around one hour, ideally

using a function with air circulation (e.g. “Forced Air”

or “Convection Bake”).

Follow the instructions for setting the function

correctly.

Please note: It is advisable to air the room after using the

appliance for the rst time.

1. SELECT A FUNCTION

When the oven is off, only the time is shown on the

display. Press and hold

to switch the oven on.

Turn the knob to view the main functions available on

the left-hand display. Select one and press

To select a sub-function (where available), select the

main function and then press

to confirm and go

to the function menu.

Turn the knob to view the sub-functions available on

the right-hand display. Select one and press

confirm.

2. SET THE FUNCTION

After having selected the function you require, you

can change its settings.

The display will show the settings that can be

changed in sequence.

TEMPERATURE/GRILL LEVEL

When the °C/°F icon flashes on the display, turn the

knob to change the value, then press

to confirm

and continue to alter the settings that follow (if

possible).

You can also set the grill level (3 = high, 2 = medium,

1 = low) at the same time.

Please note: Once the function has started, you can change

the temperature or the grill level by pressing or by

turning the knob directly.

DURATION

When the icon flashes on the display, use the

adjustment knob to set the cooking time you require

and then press

to confirm.

You do not have to set the cooking time if you want to

manage cooking manually: Press

to confirm and

start the function.

In this case, you cannot set the end cooking time by

programming a delayed start.

Please note: You can adjust the cooking time that has been

set during cooking by pressing : Turn the knob to

change the hour and press to conrm.

SETTING THE END COOKING TIME/

DELAYED START

In many functions, once you have set a cooking time

you can delay starting the function by programming

its end time.

Where you can change the end time, the display will

show the time the function is expected to finish while

the

icon flashes.

If necessary, turn the knob to set the time you want

cooking to end, then press

to confirm and start

the function.

Place the food in the oven and close the door: The

function will start automatically after the period of

time that has been calculated in order for cooking to

finish at the time you have set.

Please note: Programming a delayed cooking start time will

disable the oven preheating phase. The oven will reach the

temperature you require gradually, meaning that cooking

times will be slightly longer than those listed in the cooking

table.

During the waiting time, you can use the knob to change the

programmed end time.

Press

or to change the temperature and cooking

time settings. Press to conrm when nished.

DAILY USE

3. ACTIVATE THE FUNCTION

Once you have applied the settings you require, press

to activate the function.

You can press and hold

at any time to pause the

function that is currently active.

4. PREHEATING

Some functions have an oven preheating phase: Once

the function has started, the display indicates that the

preheating phase has been activated.

Once this phase has finished, an audible signal will

sound and the display will indicate that the oven has

reached the set temperature.

At this point, open the door, place the food in the

oven, close the door and start cooking by pressing

Please note: Placing the food in the oven before preheating

has nished may have an adverse eect on the nal cooking

result.

Opening the door during the preheating phase will pause it.

The cooking time does not include a preheating phase.

You can always change the temperature you want to reach

using the knob.

5. END OF COOKING

An audible signal will sound and the display will

indicate that cooking is complete.

To extend the cooking time without changing the

settings, turn the knob to set a new cooking time and

press

. AUTOMATIC FUNCTIONS

TEMPERATURE RECOVERY

If the temperature inside the oven decreases during a

cooking cycle because the door is opened, a special

function will be activated automatically to restore the

original temperature.

While the temperature is being restored, the

display will show a “snake” animation until the set

temperature has been reached.

While a programmed cooking cycle is in progress, the

cooking time will be increased according to how long

the door was open in order to guarantee best results.

. SPECIAL FUNCTIONS

AUTOMATIC CLEANING - PYRO

Do not touch the oven during the Pyro cycle.

Keep children and animals away from the oven

during and after (until the room has nished

airing) running the Pyro cycle.

Remove all accessories from the oven before

running the Pyro function.

If the oven is installed below a hob, make sure that

all the burners or electric hotplates are switched off

while running the self-cleaning cycle.

For optimum cleaning results, remove the worst

soiling with a damp sponge before using the Pyro

function. Only run the Pyro function if the appliance

contains heavy soiling or gives off bad odours during

cooking.

Access special functions

and turn the knob

to select

from menu. Then press to confirm.

Press

to start immediately the cleaning cycle or

turn the knob to select the shorten cycle (ECO).

Press

to start immediately the cleaning cycle, or

press

to set the end time/start delayed.

The oven will start the cleaning cycle and the door

will be locked automatically.

The oven door cannot be opened while

pyrolytic cleaning is in progress: It will remain locked

until the temperature has returned to an acceptable

level.

Air the room during and after running the Pyro cycle.

Please note: The duration and temperature of cleaning cycle

cannot be set.

. KEY LOCK

To lock the keypad, press and hold

for at least 5

seconds.

Do this again to unlock the keypad.

Please note: The key lock can also be activated while cooking

is in progress.

For safety reasons, the oven can be switched o at any time

by pressing .

HOW TO READ THE COOKING TABLE

The table lists the best function, accessories and

level to use to cook different types of food. Cooking

times start from the moment food is placed in the

oven, excluding preheating (where required). Cooking

temperatures and times are approximate and depend

on the amount of food and the type of accessory

used. Use the lowest recommended settings to begin

with and, if the food is not cooked enough, then

switch to higher settings. Use the accessories supplied

and preferably dark-coloured metal cake tins and

baking trays. You can also use Pyrex or stoneware

pans and accessories, but bear in mind that cooking

times will be slightly longer.

COOKING DIFFERENT FOODS AT THE SAME TIME

Using the “Forced Air” function, you can cook

different foods which require the same cooking

temperature at the same time (for example: fish and

vegetables), using different shelves. Remove the food

which requires a shorter cooking time and leave the

food which requires a longer cooking time in the

oven.

MEAT

Use any kind of oven tray or pyrex dish suited to the

size of the piece of meat being cooked. For roast

joints, it is best to add some stock to the bottom of

the dish, basting the meat during cooking for added

flavour. Please note that steam will be generated

during this operation. When the roast is ready, let it

rest in the oven for another 10-15 minutes, or wrap it

in aluminium foil.

When you want to grill meat, choose cuts with an

even thickness all over in order to achieve uniform

cooking results. Very thick pieces of meat require

longer cooking times. To prevent the meat from

burning on the outside, lower the position of the

wire shelf, keeping the food farther away from the

grill. Turn the meat two thirds of the way through

cooking. Take care when opening the door as steam

will escape.

To collect the cooking juices, we recommend placing

a dripping pan filled with half a litre of drinking water

directly underneath the wire shelf on which the food

is placed. Top-up when necessary.

DESSERTS

Cook delicate desserts with the conventional function

on one shelf only.

Use dark-coloured metal baking pans and always

place them on the wire shelf supplied. To cook on

more than one shelf, select the forced air function and

stagger the position of the cake tins on the shelves,

aiding optimum circulation of the hot air.

To check whether a leavened cake is cooked, insert a

wooden toothpick into the centre of the cake. If the

toothpick comes out clean, the cake is ready.

If using non-stick baking pans, do not butter the

edges as the cake may not rise evenly around the

edges.

If the item “swells” during baking, use a lower

temperature next time and consider reducing the

amount of liquid you add or stirring the mixture more

gently.

For desserts with moist fillings or toppings (such

as cheesecake or fruit tarts), use the “Convection

bake” function. If the base of the cake is soggy, lower

the shelf and sprinkle the bottom of the cake with

breadcrumbs or biscuit crumbs before adding the

filling.

PIZZA

Lightly grease the trays to ensure the pizza has a

crispy base. Scatter the mozzarella over the pizza two

thirds of the way through cooking.

RISING

It is always best to cover the dough with a damp

cloth before placing it in the oven. Dough proving

time with this function is reduced by approximately

one third compared to proving at room temperature

(20-25°C). The rising time for pizza starts at around

one hour for 1 kg of dough.

USEFUL TIPS

Download the Use and Care Guide from

docs.hotpoint.eu for more information

WWW

COOKING TABLE

RECIPE FUNCTION PREHEAT.

TEMPERATURE

(°C)

COOK TIME

(Min.)

LEVEL

AND ACCESSORIES

Leavened cakes

- 160 - 180 30 - 90

2/3

Yes 160 - 180 30 - 90

Filled cake

(cheese cake, strudel, fruit pie)

- 160 - 200 30 - 85

Yes 160 - 200 35 - 90

Biscuits/tartlets

- 170 - 180 15 - 45

Yes 160 - 170 20 - 45

Yes 160 - 170 20 - 45 ***

Choux buns

- 180 - 200 30 - 40

Yes 180 - 190 35 - 45

Yes 180 - 190 35 - 45 ***

Meringues

Yes 90 110 - 150

Yes 90 130 - 150

Yes 90 140 - 160 ***

3 1

Pizza (Thin, thick, focaccia)

- 220 - 250 20 - 40

Yes 220 - 240 20 - 40

Yes 220 - 240 25 - 50 ***

Bread loaf 0,5 kg - 180 - 220 50 - 70

Rolls - 180 - 220 30 - 50

Bread Yes 180 - 200 30 - 60

Frozen pizza

- 250 10 - 20

Yes 250 10 - 20

Salty cakes

(vegetable pie, quiche)

Yes 180 - 190 45 - 60

Yes 180 - 190 45 - 70 ***

3 1

Vols-au-vents/pu pastry crackers

Yes 190 - 200 20 - 30

Yes 180 - 190 20 - 40

Yes 180 - 190 20 - 40 ***

3 1

Lasagne/soué - 190 - 200 40 - 65

Baked pasta/cannelloni - 190 - 200 25 - 45

RECIPE FUNCTION PREHEAT.

TEMPERATURE

(°C)

COOK TIME

(Min.)

LEVEL

AND ACCESSORIES

Lamb/veal/

beef/pork

1 kg

- 190 - 200 60 - 90

Roast pork with crackling 2 kg - 170 110 - 150

Chicken / rabbit / duck 1 kg - 200 - 230 50 - 80

Turkey / goose 3 kg - 190 - 200 90 - 150

Baked Whole Fish (llet, whole) Yes 180 - 200 40 - 60

Stued vegetables

(tomatoes, courgettes, eggplants)

Yes 180 - 200 50 - 60

Toasted bread - 3 (High) 3 - 6

Fish llets/slices - 2 (Medium) 20 - 30 *

Sausages / kebabs /

spare ribs / hamburgers

2 - 3 (Medium -

High)

15 - 30 *

Roast chicken 1-1.3 kg - 2 (Medium) 55 - 70 **

Roast beef rare 1 kg - 2 (Medium) 35 - 50 **

Leg of lamb/knuckle - 2 (Medium) 60 - 90 **

Roast potatoes - 2 (Medium) 35 - 55 **

Vegetable gratin - 3 (High) 10 - 25

Lasagne and meat Yes 200 50 - 100 ***

Meat and potatoes Yes 200 45 - 100 ***

Fish and vegetables Yes 180 30 - 50 ***

Complete meal: Fruit tart (level 5)/

lasagne

(level 3)/meat (level 1)

Yes 190 40 - 120 ***

3 1

Stued roasting joints - 200 80 - 120 ***

Cuts of meat

(rabbit, chicken, lamb)

- 200 50 - 100 ***

* Turn food halfway through cooking.

** Turn food two-thirds of the way through cooking (if

necessary).

*** Estimated length of time: dishes can be removed

from the oven at dierent times depending on personal

preference.

WWW

Download the Use and Care Guide from

docs . hotpoint . eu for the table of tested recipes, compiled

for the certication authorities in accordance with the

standard IEC60350-1.

MANUAL

FUNCTIONS

Conventional Grill Turbo Grill Forced Air Convection Bake Eco Forced Air

AUTOMATIC

FUNCTIONS

Casserole Meat Maxi Cooking Bread Pizza Pastry cakes

ACCESSORIES

Wire shelf

Oven tray or cake tin

on the wire shelf

Drip tray / Baking tray /

Oven tray on wire shelf

Drip tray

Drip tray with

500ml water

Baking tray

EXTERIOR SURFACES

• Clean the surfaces with a damp microfibre cloth.

If they are very dirty, add a few drops of pH-neutral

detergent. Finish off with a dry cloth.

• Do not use corrosive or abrasive detergents. If any of

these products inadvertently comes into contact with

the surfaces of the appliance, clean immediately with

a damp microfibre cloth.

INTERIOR SURFACES

• After every use, leave the oven to cool and then

clean it, preferably while it is still warm, to remove any

deposits or stains caused by food residues To dry any

condensation that has formed as a result of cooking

foods with a high water content, let the oven to cool

completely and then wipe it with a cloth or sponge.

• Clean the glass in the door with a suitable liquid

detergent.

• The oven door can be removed to facilitate cleaning.

ACCESSORIES

Soak the accessories in a washing-up liquid solution

after use, handling them with oven gloves if they

are still hot. Food residues can be removed using a

washing-up brush or a sponge.

Make sure that the oven has

cooled down before carrying out

any maintenance or cleaning.

Do not use steam cleaners.

Do not use wire wool, abrasive

scourers or abrasive/corrosive

cleaning agents, as these could

damage the surfaces of the

appliance.

Wear protective gloves.

The oven must be disconnected

from the mains before carrying

out any kind of maintenance

work.

MAINTENANCE AND

CLEANING

Download the Use and Care Guide from

docs.hotpoint.eu for more information

WWW

REPLACING THE LIGHT

1. Disconnect the oven from the power supply.

2. Unscrew the cover from the light, replace the bulb

and screw the cover back on the light.

3. Reconnect the oven to the power supply.

Please note: Only use 25-40 W/230~V types E-14, T300°C

incandescent bulbs or 20-40 W/230~V type G9, T300°C

halogen bulbs. The bulb used in the product is specically

designed for domestic appliances and is not suitable for

general room lighting within the home (EC Regulation

244/2009). Light bulbs are available from our After-sales

Service.

- If using halogen bulbs, do not handle them with your bare

hands as your ngerprints could cause damage. Do not use

the oven until the light cover has been retted.

This function enables you to eliminate cooking

spatters using a temperature of approx. 500 °C. At this

temperature, food residues turn into deposits that can

be easily wiped away with a damp sponge once the

oven has cooled down.

If the oven is installed below a hob, make sure that

all the burners or electric hotplates are switched off

while running the self-cleaning cycle.

For optimum cleaning results, remove the worst

soiling with a damp sponge before using the Pyro

function.

Do not touch the oven during the Pyro cycle.

Remove all accessories from the oven before

running the Pyro cycle.

Keep children and animals away from the oven

during and after (until the room has finished

airing) running the Pyro cycle.

CLEANING THE COOKING COMPARTMENT WITH THE PYRO CYCLE

The oven has two different pyrolytic cleaning

functions: The standard cycle (PYRO) provides

thorough cleaning if the oven is heavily soiled, while

the economic cycle (ECO) is shorter and

consumes less energy than the standard cycle, which

makes it suitable for use at regular intervals.

Only run the Pyro function if the appliance contains

heavy soiling or gives off bad odours during cooking.

Please note: The oven door cannot be opened while

pyrolytic cleaning is in progress. It will remain locked until

the temperature has returned to an acceptable level. Air the

room during and after running the Pyro cycle.

REMOVING AND REFITTING THE DOOR

1. To remove the door, open it fully and lower the

catches until they are in the unlock position.

2. Close the door as much as you can.

Take a firm hold of the door with both hands – do not

hold it by the handle.

Simply remove the door by continuing to close it

while pulling it upwards at the same time until it is

released from its seating. Put the door to one side,

resting it on a soft surface.

~15°

3. Refit the door by moving it towards the oven,

aligning the hooks of the hinges with their seating

and securing the upper part onto its seating.

4. Lower the door and then open it fully.

Lower the catches into their original position: Make

sure that you lower them down completely.

Apply gentle pressure to check that the catches are in

the correct position.

“CLICK”

5. Try closing the door and check to make sure that it

lines up with the control panel. If it does not, repeat

the steps above: The door could become damaged if

it does not work properly.

PRODUCT FICHE

WWW

The product fiche with energy data of this

appliance can be downloaded from the website

docs . hotpoint . eu

HOW TO OBTAIN THE USE AND CARE GUIDE

WWW

Download the Use and Care Guide

from our website docs.hotpoint.eu (you

can use this QR Code), specifying the

product’s commercial code.

> Alternatively, contact our Client After-sales Service.

CONTACTING OUR AFTERSALES SERVICE

You can find our contact details in the warranty

manual. When

contacting our Client

After-sales Service,

please state the codes

provided on your

product’s identification

plate.

Model: xxxXXXXxx

XXXXXX XXXXXX XXXXX XXXXXXX

400010901924

Printed in Italy

001

TROUBLESHOOTING

Download the Use and Care Guide from

docs.hotpoint.eu for more information

WWW

Problem Possible cause Solution

The oven is not working.

Power cut.

Disconnection from the

mains.

Check for the presence of mains electrical power

and whether the oven is connected to the

electricity supply.

Turn off the oven and restart it to see if the fault

persists.

The door will not open.

Fault with the door lock.

Cleaning cycle in progress.

Switch the oven off and on again to see if the

fault persists. Wait for the function to finish and

for the oven to cool down.

The display shows the letter “F”

followed by a number.

Software problem. Contact you nearest Client After-sales Service

Centre and state the number following the letter

“F”.

Hotpoint FI4 854 P IX HA User guide

Brand: Hotpoint

Model: FI4 854 P IX HA

Category: Ovens

Type: User guide

This manual is also suitable for

FI5 854 P IX HA

Download PDF

report

Hotpoint FI4 854 P IX HA User guide

This manual is also suitable for

Hotpoint FI4 854 P IX HA User guide

Related papers

Other documents