IKEA RENLIGFWM User manual

Brand: IKEA

Model: RENLIGFWM

Category: Washing machines

Type: User manual

This manual is also suitable for

RENLIG

FWM7

ENGLISH 4

Contents

Safety information 4

Safety instructions 5

Product description 7

Control panel 8

First use 11

Daily use 11

Helpful hints and tips 15

Washing programmes 16

Consumption values 19

Care and cleaning 19

What to do if… 22

Technical data 25

Electrical connection 25

Environment concerns 26

IKEA GUARANTEE 26

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read

the supplied instructions. The manufacturer is not responsible if

an incorrect installation and use causes injuries and damages.

Always keep the instructions with the appliance for future refer-

ence.

Children and vulnerable people safety

Warning! Risk of suffocation, injury or permanent disability.

• Do not let persons, children included, with reduced physical

sensory, reduced mental functions or lack of experience and

knowledge use the appliance. They must have supervision or

instruction for the operation of the appliance by a person

who is responsible for their safety.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appliance door when

it is open.

• If the appliance has a child safety device, we recommend

you activate it.

General Safety

• Before maintenance, deactivate the appliance and discon-

nect the mains plug from the mains socket.

ENGLISH 4

• Do not change the specification of this appliance.

• Obey the maximum load volume of 7 kg (refer to the “Pro-

gramme chart” chapter).

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• The operating water pressure (minimum and maximum) must

be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa)

• The ventilation openings in the base (if applicable) must not

be obstructed by a carpet.

• The appliance is to be connected to the water mains using

the new supplied hose-sets. Old hose sets must not be

reused.

Safety instructions

Installation

• Remove all the packaging and the transit

bolts.

• Keep the transit bolts. When you move

the appliance again you must block the

drum.

• Do not install or use a damaged appli-

ance.

• Do not install or use the appliance where

the temperature is less than 0 °C or

where it is exposed to the weather.

• Obey the installation instruction supplied

with the appliance.

• Make sure that the floor where you install

the appliance is flat, stable, heat resistant

and clean.

• Do not install the appliance where the

appliance door can not be fully opened.

•Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Make sure that there is air circulation be-

tween the appliance and the floor.

• Adjust the feet to have the necessary

space between the appliance and the

carpet.

Electrical connection

Warning! Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical information

on the rating plate agrees with the power

supply. If not, contact an electrician.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-plug adapters and ex-

tension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable. Con-

tact the Service or an electrician to

change a damaged mains cable.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains

plug.

• Do not touch the mains cable or the

mains plug with wet hands.

• This appliance complies with the E.E.C.

Directives.

ENGLISH 5

Water connection

• Make sure not to cause damage to the

water hoses.

• The appliance is to be connected to the

water mains using the new supplied

hose-sets. Old hose sets must not be

reused.

• Before you connect the appliance to new

pipes or pipes not used for a long time,

let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

Use

Warning! Risk of injury, electrical

shock, fire, burns or damage to the

appliance.

• Use this appliance in a household envi-

ronment.

• Obey the safety instructions on the deter-

gent packaging.

• Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

• Do not touch the glass of the door while a

programme operates. The glass can be

hot.

• Make sure that you remove all metal ob-

jects from the laundry.

• Do not put a container to collect possible

water leakage under the appliance. Con-

tact the Service to ensure which accesso-

ries can be used.

Care and Cleaning

Warning! Risk of injury or damage to

the appliance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do not

use abrasive products, abrasive cleaning

pads, solvents or metal objects.

Disposal

Warning! Risk of injury or suffocation.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent chil-

dren and pets to get closed in the appli-

ance.

Service

• Contact the Service to repair the appli-

ance. We recommend only the use of

original spare parts.

ENGLISH 6

Product description

1 2

Detergent dispenser drawer

Control panel

Door opening handle

Rating Plate

Adjustable feet

Detergent dispenser drawer

Compartment for powder or liquid de-

tergent used for main wash. If using liquid

detergent pour it just before starting the

programme.

Compartment for liquid additives (fabric

softener, starch).

Follow the product manufacturer’s rec-

ommendations on quantities to use

and do not ever exceed the «MAX» mark in

the detergent dispenser drawer. Any fabric

softener or starching additives must be

poured into the compartment before start-

ing the wash programme.

Caution! If you wish to carry out the prewash, pour the detergent among washing

items into the drum.

Caution! Depending on the type detergent you use (powder of liquid), ensure that

the flap, placed in the main wash compartment, is in the desired position.

ENGLISH 7

Door safety button

This appliance incorporates a special fea-

ture to prevent children and pets becom-

ing trapped inside the drum.

To activate this de-

vice, rotate the but-

ton clockwise (with-

out pressing it) in-

side the door until

the groove is hori-

zontal. If necessary

use a coin.

To disable this de-

vice and restore the

possibility of closing

the door, rotate the

button anticlockwise

until the groove is

vertical.

Control panel

Below is a picture of the control panel. It shows the programme selector dial as well as

the buttons and the indicator lights. These are presented by relevant numbers on the

following pages.

90˚

60˚

40˚

1600

900

700

30˚

30'

5678910

Programme selector dial

Display

Delay Start button

Door lock light

Start/Pause button

Extra Rinse button

ENGLISH 8

Super Quick button

Rinse Hold button

Spin button

Temperature button

Table of Symbol

= Cottons = Miniprogramme

+ = Cottons + Prewash = Jeans

ECO = Cotton Economy

= On/Off - Reset

= Synthetics = Temperature

= Delicates = Cold wash

= Handwash/Wool = Spin

= Rinse = Rinse & Hold

= Drain = Super Quick

= Spin = Extra Rinse

=Baby = Start/Pause

=Easy Iron = Delay Start

= 5 shirts = Door lock

Programme selector dial It allows you to switch the appliance On/Off and/or to select

a programme.

ENGLISH 9

Display

The display shows the following information:

• A

–Child safety lock.

This device permits you to leave the appliance unatten-

ded during it's functioning.

• B

– Duration of the selected programme.

After selecting a programme, the duration is displayed

in hours and minutes (for example

). The duration

is calculated automatically on the basis of the maximum

recommended load for each type of fabric. After the

programme has started, the time remaining is updated

every minute.

– Delayed start.

The Selected delay set by pressing the relevant button

appears on the display for a few seconds, then the du-

ration of the selected programme is displayed again.

The delay time value decreases by one unit every hour

and then, when 1 hour remains, every minute.

–Alarm codes.

In the event of operating problems, some alarm codes

can be displayed, for example

(see paragraph

«What to do if...»).

– Incorrect option selection.

If an option which is not compatible with the set wash

programme is selected, the message Err is displayed at

the bottom of the display for a few seconds and the inte-

grated red indicator light of button 5 start flashing.

– End of programme.

When the programme has finished the flashing zero (

)

is displayed, the indicator light 4 and the indicator light

of button 5 go out and the door can be opened.

Delay Start button The programme can be delayed from 30 min - 60 min - 90

min, 2 hours and then by 1 hour up to a maximum of 20

hours by means of this button.

Door Locked indicator

light

The indicator light 4 illuminates when the programme starts

and indicates if the door can be opened:

• light on: the door cannot be opened. The machine is work-

ing or has stopped with water left in the tub.

• light off: the door can be opened. The programme is finish-

ed or the water has been emptied out.

• light blinking: the door is opening in a few minutes.

Start/Pause button This button allows you to start or to interrupt the selected

washing programme.

ENGLISH 10

Extra Rinse button This appliance is designed for saving energy. If it necessary

to rinse the laundry using an extra quantity of water (extra

rinse), select this option. Some additional rinses will be per-

formed. This option is recommended for people who are al-

lergic to detergents, and in areas where the water is very

soft.

Super Quick button Short cycle for lightly soiled items or for laundry which needs

only freshening up. We recommend you to reduce the fabrics

Rinse Hold button By selecting this function the water of the last rinse is not

emptied out to prevent the fabrics from creasing. Before

opening the door it will be necessary to empty out the water.

Even if the washing programme is completed the drum turns

regularly to prevent the laundry creases.

To empty out the water, please read the paragraph «At the

end of the programme».

Spin reduction button By pressing this button you can change the spin speed of the

selected programme.

Temperature button This button allows you to increase or decrease the washing

temperature. At the position

, the machine will perform a

washing cycle with cold water.

First use

• Ensure that the electrical and water

connections comply with the installa-

tion instructions.

• Ensure that the drum is empty.

• Before the first wash, run a cotton

cycle at the highest temperature

without any laundry in the machine,

to remove any manufacturing resi-

due from the drum and tub. Pour

1/2 a measure of detergent into the

main wash compartment and start

the machine.

Daily use

Open the door

Open the door by carefully pulling the door

handle outwards.

Load the laundry

Place the laundry in

the drum, one item

at a time, shaking

them out as much

as possible.

By pushing the

porthole frame,

ENGLISH 11

close firmly the

door.

Measure out detergent and fabric

softener

First check the flap position:

UP- Flap position if

using POWDER de-

tergent

DOWN - Flap posi-

tion if using LIQUID

detergent during

main wash

PUSH

REMOVE

TO CLEAN

PUSH

REMOVE

TO CLEAN

If the flap is not in the desired position:

• Remove the drawer. Push the drawer

edge outwards where indicated by the

arrow (PUSH) to facilitate drawer re-

moval.

The flap is down and you wish to use

powder detergent:

PUSH

REMOVE

TO CLEAN

• Rotate the flap

upwards. Ensure

to fit the flap

completely in.

• Carefully put the

drawer back.

• Measure out the

detergent.

• Pour the powder

detergent into

the main wash

compartment

The flap is up and you wish to use liquid

detergent:

PUSH

REMOVE

TO CLEAN

• Rotate the flap

downwards.

• Carefully put the

drawer back.

• Measure out the detergent.

For the quantity of detergent, refer

always to what is written on the

product packing and ensure that the de-

tergent can be poured in the drawer.

• Pour the liquid detergent in the com-

partment

without exceeding the limit

indicated in the flap. The detergent

must be placed in the appropriate com-

partments of the dispenser drawer be-

fore starting the wash programme.

Warning! Do not use the flap in

"DOWN" position with:

• Gelatinous detergent or thick deter-

gent.

• Powder detergent.

• With programmes with prewash.

• Do not use liquid detergent if the wash-

ing programme doesn't start immedi-

ately.

In all above listed cases, use the flap

in "UP" position .

ENGLISH 12

Pour fabric softener

or any additives in-

to the compartment

marked

(do not

exceed the «MAX»

mark in the draw-

er). Any additives

must be placed in

the appropriate

compartments of

the dispenser draw-

er just before start-

ing the wash pro-

gramme.

Close the drawer gently

Select the required programme by turning

the programme selector dial (1)

The appliance is now switched on. The indi-

cator light of button 5 starts to blink.

At the end of the programme the selector

dial must be turned to position O, to switch

the appliance off.

For the description of each wash cycle,

the compatibility among the washing

programmes and the options, consult the

chapter «Washing Programmes».

Caution! If you turn the programme

selector dial to another programme

when the appliance is working, the red

indicator light of button 5 will blink 3 times

and the message Err appears on the

display to indicate a wrong selection. The

appliance will not perform the new selected

programme.

Select the temperature by pressing button

By selecting a programme, the appliance

proposes automatically a default tempera-

ture. Press button 10 repeatedly to increase

or decrease the temperature, if you want

your laundry to be washed at a different

temperature. The relevant indicator light il-

luminates.

Reduce the spin speed by pressing button

By selecting a programme, the appliance

proposes automatically the maximum spin

speed provided for that programme.

Press button 9 repeatedly to change the

spin speed, if you want your laundry to be

spun at a different speed. The relevant indi-

cator light illuminates.

Select the available options by pressing

buttons 8, 7 and 6

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before starting the pro-

gramme.

When these buttons are pressed, the corre-

sponding indicator lights illuminate. When

they are pressed again, the indicator lights

go out. If an incorrect option is selected, the

integrated red indicator light of the button

5 flashes for 3 times and the message Err

appears on the display.

For the compatibility among the wash-

ing programmes and the options see

chapter «Washing Programmes».

Select the Delay Start by pressing button

Before you start the programme, if you wish

to delay the start, press this button to select

the desired delay.

The selected delay time value will appear

on the display for a few seconds, then the

duration of the programme will appear

again.

You must select this option after you have

set the programme and before you start the

programme.

You can cancel or modify the delay time at

any moment, before you press button 5.

Selecting the delay start :

1. Select the programme and the required

options.

2. Select the delay start by pressing but-

ton 3.

ENGLISH 13

3. Press button 5:

– the machine starts its hourly count-

down.

– the programme will start after the se-

lected delay has expired.

Cancelling the Delay Start after having star-

ted the programme:

1. Set the washing machine to PAUSE by

pressing button 5.

2. Press button 3 once. On the display will

appear

3. Press button 5 again to start the pro-

gramme.

• The selected delay can be changed

only after selecting the washing pro-

gramme again.

• The door will be locked throughout

the delay time. If you need to open

the door, you must first set the wash-

ing machine to PAUSE by pressing

button 5 and wait a few minutes be-

fore opening the door. After you

have closed the door, press the

same button again.

•The Delay Start cannot be selected

with the draining programme.

Start the programme by pressing button 5

To start the selected programme, press this

button; the corresponding green indicator

light stops blinking.

The indicator light 4 illuminates to indicate

that the appliance starts operating and the

door is locked.

If you have chosen a delayed start, the ma-

chine will begin the countdown.

If an incorrect option is selected, the

message Err appears on the display

for a few seconds and the red indicator

light of the button 5 blinks 3 times.

Altering an option or a running

programme

It is possible to change some options before

the programme carries them out.

Before you make any change, you must

PAUSE the appliance by pressing the button

Changing a running programme is possible

only by resetting it. Turn the programme se-

lector dial to O and then to the new pro-

gramme position. Start the new programme

by pressing the button 5 again. The wash-

ing water in the tub will be not emptied out.

Interrupting a programme

Press the button 5 to interrupt a programme

which is running, the corresponding green

indicator light starts blinking.

Press the button again to restart the pro-

gramme.

Cancelling a programme

Turn the selector dial to O to cancel a pro-

gramme which is running.

You can select now a new programme.

Opening the door after the programme

has started

First set the machine to pause by pressing

the button 5.

If the indicator light 4 blinks and after a few

minutes goes off, the door can be opened.

If the indicator light 4 remains lit, this means

that the machine is already heating or that

the water level is too high. In any case, do

not try to force the door open!

If you cannot open the door but you need

to open it, you have to switch the machine

off by turning the selector dial to

. After

a few minutes the door can be opened.

After closing the door, it is necessary to se-

lect the programme and options again and

to press button 5.

Caution! Pay attention to the water

level and temperature!

At the end of the programme

The machine stops automatically. Some

acoustic signals sound and a blinking

ap-

pears on the display, the indicator light of

button 5 and the indicator light 4 go off.

If a programme or an option that ends with

water left in the tub has been selected, the

indicator light 4 remains on and the door is

locked to indicate that the water must be

emptied out before opening the door.

ENGLISH 14

To empty out the water:

Turn the programme selector dial to

2. Select the draining or spinning pro-

gramme.

3. Reduce the spin speed if needed, by

pressing button 9.

4. Press button 5.

At the end of the programme, the door is

released and can be opened. Turn the pro-

gramme selector dial to

to switch the

machine off.

Remove the laundry from the drum and

carefully check that the drum is empty. If

you do not intend to carry out another

wash, close the water tap. Leave the door

open to prevent the formation of mildew

and unpleasant smells.

Stand by : once the programme has finish-

ed after a few minutes the energy saving

system will be enabled. The brightness of

the display is reduced. By pressing any but-

ton the appliance will come out of the ener-

gy saving status.

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each gar-

ment label and the manufacturer’s washing

instructions. Sort the laundry as follows:

whites, coloureds, synthetics, delicates,

woollens.

Removing stains

Stubborn stains may not be removed by just

water and detergent. It is therefore advisa-

ble to treat them prior to washing.

Blood: treat fresh stains with cold water. For

dried stains, soak overnight in water with a

stain remover product then rub in the soap

and water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth

and dab the stain; treat several times.

Dried grease stains: moisten with turpen-

tine, lay the garment on a soft surface and

dab the stain with the fingertips and a cot-

ton cloth.

Rust: oxalic acid dissolved in hot water or a

rust removing product used cold. Be careful

with rust stains which are not recent since

the cellulose structure will already have

been damaged and the fabric tends to

hole.

Mould stains: treat with bleach, rinse well

(white cottons and fast coloureds only).

Grass: soap lightly and treat with bleach

(white cottons and fast coloureds only).

Ball point pen and glue: moisten with ace-

tone

, lay the garment on a soft cloth and

dab the stain.

Lipstick: moisten with acetone as above,

then treat stains with methylated spirits.

Treat any residual marks with bleach.

Red wine: soak in water and detergent,

rinse and treat with acetic or citric acid,

then rinse. Treat any residual marks with

bleach.

Ink: depending on the type of ink, moisten

the fabric first with acetone

, then with ace-

tic acid; treat any residual marks on white

fabrics with bleach and then rinse thor-

oughly.

Tar stains: first treat with stain remover, me-

thylated spirits or benzine, then rub with

detergent paste.

Degrees of water hardness

Water hardness is classified in so-called

“degrees” of hardness. Information on

hardness of the water in your area can be

obtained from the relevant water supply

company, or from your local authority.

1) do not use acetone on artificial silk

ENGLISH 15

Characteristic

Degrees of water hardness

German °dH French °T.H.

Soft 0-7 0-15

Medium 8-14 16-25

Hard 15-21 26-37

Very hard > 21 > 37

A water softener must be added when water has a medium-high degree of hardness.

Follow the manufacturer’s instructions. The quantity of detergent can then always be

adjusted (reduced) to degree of hardness soft.

Washing programmes

Please always refer to the care label symbol of your garment and select the washing

programme based on what it says.

Programme/

Temperature

Type of

laundry

Cycle

Description

Max. Load

Red. Load

Available

Options

Detergent

Compartment

COTTONS

90° - 60° -

40° - 30° -

Cold

White and coloured

cotton (normally-

lightly soiled items).

Main wash

Rinses

Max. final

spin at

1600 rpm

7 kg

3.5 kg

Spin

Rinse Hold

Super

Quick

Extra Rinse

COTTONS +

PREWASH

90° - 60° -

40° - 30° -

Cold

White and coloured

cotton (heavy-nor-

mally soiled items).

Prewash

Main wash

Rinses

Max. final

spin at

1600 rpm

7 kg

3.5 kg

Spin

Rinse Hold

Super

Quick

Extra Rinse

COTTON

ECO

60°-40°

White and fast col-

oured cotton econo-

my, lightly-heavy

soiled items, shirts,

underwear.

Main wash

Rinses

Max. final

spin at

1600 rpm

7 kg

Spin

Rinse Hold

Extra Rinse

SYNTHETICS

60° - 40° -

30° - Cold

Synthetic or mixed

fabrics: underwear,

coloured garments,

non-shrink shirts,

blouses.

Main wash

Rinses

Max. final

spin at 900

rpm

3.5 kg

1.5 kg

Spin

Rinse Hold

Super

Quick

Extra Rinse

ENGLISH 16

Programme/

Temperature

Type of

laundry

Cycle

Description

Max. Load

Red. Load

Available

Options

Detergent

Compartment

DELICATES

40° - 30° -

Cold

Delicate fabrics: for

example curtains.

Main wash

Rinses

Max. final

spin at 700

rpm

3.5 kg

1.5 kg

Spin

Rinse Hold

Super

Quick

Extra Rinse

WOOL/

HANDWASH

40° - 30° -

Cold

Special programme

for wool garments

bearing the «Pure

new wool, non-

shrink, appliance

washable» label and

delicate fabrics with

«hand washing»

care symbol.

Main wash

Rinses

Max. final

spin at 900

rpm 2 kg

Spin

Rinse Hold

RINSE Single rinse and spin

to starch or soften

hand washed gar-

ments.

Rinse

Max. final

spin at 700

rpm for syn-

thetic and

delicate

items.

7 kg

Spin

Rinse Hold

Extra Rinse

DRAIN For emptying out the

water of the last

rinse in programmes

with the Rinse Hold

option selected.

Draining of

water

7 kg

SPIN Separate spin for

hand washed gar-

ments and after pro-

grammes with the

Rinse Hold option se-

lected. You can

choose the spin

speed by pressing

the relevant button

to adapt it to the

fabrics to be spun.

Max. final

spin at

1600 rpm

7 kg

Spin

ENGLISH 17

Programme/

Temperature

Type of

laundry

Cycle

Description

Max. Load

Red. Load

Available

Options

Detergent

Compartment

BABY

30° - Cold

Special programme

for baby suits.

Main wash

Rinses

Max. final

spin at 700

rpm

2 kg

Spin

Rinse Hold

Extra Rinse

EASY IRON

60° - 40° -

30° - Cold

Synthetic fabrics: se-

lecting this pro-

gramme the laundry

is gently washed and

spun to avoid any

creasing. In this way

ironing is easier. Fur-

thermore the appli-

ance will perform

additional rinses.

Main wash

Rinses

Max. final

spin at 900

rpm

1 kg

Spin

Rinse Hold

Extra Rinse

5 SHIRTS

30°

Synthetics and mixed

fabrics. Suitable for 5

- 6 shirts lightly

soiled.

Main wash

Rinses

Max. final

spin at 900

rpm

2 kg

Spin

MINIPROG-

RAMME

30°

Synthetics and deli-

cates. Lightly soiled

items or which only

needs freshening up.

Main wash

Rinses

Max. final

spin at 700

rpm

2 kg

Spin

JEANS

60° - 40° -

30° - Cold

Trousers, shirts or

jackets in denim and

jersey realized with

hi-tech materials.

The Extra Rinse op-

tion is activated au-

tomatically.

Main wash

Rinses

Max. final

spin at 900

rpm

3.5 kg

Spin

Rinse Hold

1) If you select the SUPER QUICK option, we recommend you, to reduce the maximum load as indicated. Full loading is

possible however with somewhat reduced cleaning results.

2) Standard programmes for the Energy Label consumption values

According to regulation 1061/2010, these programmes are respectively the “standard 60 °C cotton programme”

and the “standard 40 °C cotton programme”. They are the most efficient programmes in terms of combined energy

and water consumption for washing normally soiled cotton laundry.

The washing temperature of the washing phase may differ from the temperature declared for the selected pro-

gramme.

3) If this option is not active the max. final spin for cotton items is 1600 rpm.

ENGLISH 18

Consumption values

The data of this table are approximate. Different causes can change the data: the

quantity and type of laundry, the water and ambient temperature.

Programmes Load

(kg)

Energy con-

sumption

(kWh)

Water con-

sumption (li-

tre)

Approximate

programme

duration (mi-

nutes)

Remaining

moisture

(%)

Cottons 60 °C 7 1.30 73 170 44

Cottons 40 °C 7 0.85 73 145 44

Synthetics 40

°C

3.5 0.65 58 95 35

Delicates 40 °C 3.5 0.65 71 77 35

Wool/Hand

wash 30 °C

20.30 48 55 30

Standard cotton programmes

Standard 60

°C cotton

71.07 50 236 44

Standard 60

°C cotton

3.5 0.79 36 192 44

Standard 40

°C cotton

3.5 0.57 36 166 44

1) At the end of spin phase.

Off Mode (W) Left On Mode (W)

0.48 0.48

The information given in the charts above are in compliance with the EU Commission reg-

ulation 1015/2010 implementing directive 2009/125/EC.

Care and cleaning

Warning! Switch the appliance off

before you carry out any cleaning or

maintenance work.

Maintenance Wash

With the use of low temperature washes it is

possible to get a build up of residues inside

the drum.

We recommend that a maintenance wash

be performed on a regular basis.

To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash pro-

gramme.

• Use a normal measure of detergent, must

be a powder with biological properties.

Cleaning the dispenser drawer

The washing powder and additive dispens-

er drawer should be cleaned regularly.

ENGLISH 19

• Remove the drawer.

•To aid cleaning,

the top part of

the additive com-

partment should

be removed.

• Use a stiff brush to clean and remove

all washing powder residue.

• Clean all the removed parts of the dis-

penser drawer under a tap to remove

any traces of accumulated powder.

• Use the previous

brush to clean the

recess, ensuring

that upper and

lower part of it is

well cleaned.

After having cleaned the dispenser and

the drawer recess, replace it.

Cleaning the drain filter

The filter permits to hold fluff or foreign

bodies left unawares in the laundry.

The pump must be cleaned regularly.

To clean the filter, proceed as follows:

• turn programme selector dial to position

;

• unplug the appliance;

• open the door;

• turn the drum

and align the fil-

ter cover (FILTER)

with the arrow on

the door seal;

•open the filter

cover by pressing

the special hook

and by rotating

the cover up-

wards;

Warning!

Keep the filter

cover open until the

filter removal.

• before removing

the filter, remove

any fluff or small

objects from

around the filter;

ENGLISH 20

Page is loading ...

IKEA RENLIGFWM User manual

Brand: IKEA

Model: RENLIGFWM

Category: Washing machines

Type: User manual

This manual is also suitable for

Download PDF

report

IKEA RENLIGFWM User manual

This manual is also suitable for

IKEA RENLIGFWM User manual

Related papers

Other documents